Übersetzung für "Elektrische festigkeit" in Englisch
																						Die
																											Verbundwerkstoffe
																											weisen
																											außerdem
																											eine
																											hohe
																											elektrische
																											Festigkeit
																											auf.
																		
			
				
																						The
																											composite
																											materials
																											also
																											exhibit
																											high
																											dielectric
																											strength.
															 
				
		 EuroPat v2
			
																						Nach
																											dem
																											Eintauchen
																											des
																											Transformatoröls
																											ist
																											die
																											elektrische
																											Festigkeit
																											hoch.
																		
			
				
																						After
																											immersing
																											the
																											transformer
																											oil,
																											the
																											electrical
																											strength
																											is
																											high.
															 
				
		 ParaCrawl v7.1
			
																						Der
																											höchste
																											gemessene
																											Wert
																											vor
																											dem
																											elektrischen
																											Durchschlag
																											ergibt
																											die
																											elektrische
																											Festigkeit.
																		
			
				
																						This
																											value
																											is
																											considered
																											the
																											dielectric
																											strength.
															 
				
		 ParaCrawl v7.1
			
																						Abstützleisten
																											sind
																											nicht
																											erforderlich
																											und
																											würden
																											zudem
																											die
																											elektrische
																											Festigkeit
																											im
																											zugehörigen
																											Kühlkanal
																											ungünstig
																											beeinflussen.
																		
			
				
																						Support
																											straps
																											are
																											not
																											necessary
																											and
																											would,
																											in
																											addition,
																											have
																											an
																											adverse
																											effect
																											on
																											the
																											dielectric
																											strength
																											in
																											the
																											cooling
																											canal.
															 
				
		 EuroPat v2
			
																						Abatützleisten
																											sind
																											nicht
																											erforderlich
																											und
																											würden
																											zudem
																											die
																											elektrische
																											Festigkeit
																											im
																											zugehörigen
																											Kühlkkanal
																											ungünstig
																											beeinflussen.
																		
			
				
																						Support
																											straps
																											are
																											not
																											necessary
																											and
																											would,
																											in
																											addition,
																											have
																											an
																											adverse
																											effect
																											on
																											the
																											dielectric
																											strength
																											in
																											the
																											cooling
																											canal.
															 
				
		 EuroPat v2
			
																						Durch
																											den
																											Überdruck
																											kann
																											die
																											elektrische
																											Festigkeit
																											des
																											elektrisch
																											isolierenden
																											Fluids
																											zusätzlich
																											erhöht
																											werden.
																		
			
				
																						As
																											a
																											result
																											of
																											the
																											elevated
																											pressure,
																											the
																											electric
																											strength
																											of
																											the
																											electrically
																											insulating
																											fluid
																											can
																											be
																											additionally
																											increased.
															 
				
		 EuroPat v2
			
																						Ausgehend
																											von
																											einem
																											radial
																											elastisch
																											aufweitbaren,
																											vorgefertigten
																											Steuerelement
																											zur
																											Steuerung
																											des
																											elektrischen
																											Feldes
																											in
																											Geräten
																											der
																											Hochspannungstechnik,
																											insbesondere
																											in
																											Garnituren
																											von
																											Hochspannungskabeln,
																											das
																											auf
																											einen
																											blanken
																											oder
																											isolierten
																											Leiter
																											aufschiebbar
																											ist
																											und
																											aus
																											mehreren
																											elastischen
																											Isolierkörpern
																											besteht,
																											die
																											in
																											Achsrichtung
																											des
																											Leiters
																											aufeinanderfolgend
																											und
																											ineinandergreifend
																											angeordnet
																											und
																											mit
																											trichterförmig
																											verlaufenden
																											Stirnflächen
																											versehen
																											sind
																											und
																											denen
																											elektrisch
																											leitende
																											Teile
																											aus
																											ebenfalls
																											elastischem
																											Material
																											zugeordnet
																											sind,
																											die
																											gemeinsam
																											eine
																											kapazitive
																											Steuerung
																											bilden,
																											liegt
																											der
																											Erfindung
																											die
																											Aufgabe
																											zugrunde,
																											durch
																											einstückige
																											Ausgestaltung
																											des
																											gesamten
																											Steuerelementes
																											dessen
																											elektrische
																											Festigkeit
																											zu
																											verbessern.
																		
			
				
																						Starting
																											out
																											from
																											a
																											prefabricated
																											control
																											element
																											which
																											can
																											be
																											elastically
																											expanded
																											radially,
																											for
																											controlling
																											the
																											electric
																											field
																											in
																											high
																											voltage
																											apparatus,
																											especially
																											in
																											fittings
																											of
																											high
																											voltage
																											cables,
																											which
																											can
																											be
																											slipped
																											onto
																											a
																											bare
																											or
																											insulated
																											conductor
																											and
																											consists
																											of
																											several
																											elastic
																											insulators
																											which
																											follow
																											each
																											other
																											in
																											the
																											axial
																											direction
																											and
																											engage
																											each
																											other
																											and
																											are
																											provided
																											with
																											funnel
																											shaped
																											end
																											faces,
																											and
																											with
																											which
																											electrically
																											conductive
																											parts
																											of
																											likewise
																											electric
																											material
																											are
																											associated
																											which
																											together
																											form
																											a
																											capacitive
																											control,
																											it
																											is
																											an
																											object
																											of
																											the
																											present
																											invention
																											to
																											improve
																											its
																											dielectric
																											strength
																											by
																											making
																											the
																											entire
																											control
																											element
																											of
																											one
																											piece.
																											SUMMARY
																											OF
																											THE
																											INVENTION
															 
				
		 EuroPat v2
			
																						Da
																											die
																											Randbereiche
																											keine
																											Freiräume
																											mehr
																											aufweisen,
																											ist
																											auch
																											die
																											elektrische
																											Festigkeit
																											besser
																											als
																											bei
																											Lagenwicklungen,
																											wie
																											sie
																											nach
																											dem
																											vorbekannten
																											Verfahren
																											hergestellt
																											werden
																											können.
																		
			
				
																						Since
																											the
																											edge
																											areas
																											no
																											longer
																											have
																											any
																											free
																											spaces,
																											the
																											electrical
																											strength
																											is
																											better
																											than
																											with
																											layer
																											windings
																											made
																											according
																											to
																											the
																											prior
																											art
																											method.
															 
				
		 EuroPat v2
			
																						Vorzugsweise
																											sind
																											in
																											der
																											Isolierschicht
																											12
																											und
																											im
																											Isolierkonus
																											13
																											die
																											Feldstärken
																											hoch
																											und
																											ebenso
																											die
																											elektrische
																											Festigkeit
																											für
																											diese
																											Teile.
																		
			
				
																						The
																											field
																											strengths
																											are
																											preferably
																											high
																											in
																											the
																											insulating
																											layer
																											12
																											and
																											in
																											the
																											insulating
																											cone
																											13,
																											as
																											is
																											the
																											electric
																											strength
																											for
																											these
																											parts.
															 
				
		 EuroPat v2
			
																						Der
																											Kern
																											der
																											Erfindung
																											ist
																											im
																											wesentlichen
																											darin
																											zu
																											sehen,
																											dass
																											in
																											der
																											Statorwicklungsisolierung
																											schichfförmige
																											Träger
																											in
																											Form
																											von
																											Gewebestrukturen
																											Verwendung
																											finden,
																											die
																											ein
																											Volumenverhältnis
																											von
																											Längsfäden
																											zu
																											Querfäden
																											von
																											mindestens
																											2.5:
																											1
																											aufweisen,
																											wobei
																											diese
																											Träger
																											mit
																											Feinglimmer
																											hoher
																											Packungsdichte
																											versehen
																											sind
																											und
																											das
																											Gewichtsverhältnis
																											Feinglimmer
																											zu
																											Trägermaterial
																											im
																											so
																											aufgebauten
																											Glimmerband
																											gleich
																											oder
																											grösser
																											6:
																											1
																											ist,
																											wodurch
																											eine
																											kompakte
																											lsolierungsstruktur
																											ermöglicht
																											wird,
																											die
																											bei
																											geringerer
																											Dicke
																											eine
																											mindestens
																											gleiche
																											elektrische
																											Festigkeit
																											wie
																											bekannte
																											Glimmerbänder
																											aus
																											dem
																											Stand
																											der
																											Technik
																											ergibt
																											und
																											zusätzlich
																											eine
																											wesentlich
																											höhere
																											Wärmeleitfähigkeit
																											aufweisen.
																		
			
				
																						The
																											essence
																											of
																											the
																											invention
																											is
																											to
																											be
																											seen
																											essentially
																											in
																											that
																											the
																											stator
																											winding
																											insulation
																											makes
																											use
																											of
																											layer-like
																											carriers
																											in
																											the
																											form
																											of
																											fabric
																											structures
																											which
																											have
																											a
																											volume
																											ratio
																											of
																											longitudinal
																											threads
																											to
																											transverse
																											threads
																											of
																											at
																											least
																											2.5:1,
																											these
																											carriers
																											being
																											provided
																											with
																											fine
																											mica
																											having
																											a
																											high
																											packing
																											density,
																											and
																											the
																											weight
																											ratio
																											of
																											fine
																											mica
																											to
																											carrier
																											material
																											in
																											the
																											mica
																											band
																											thus
																											composed
																											being
																											equal
																											to
																											or
																											greater
																											than
																											6:1,
																											thereby
																											making
																											it
																											possible
																											to
																											have
																											a
																											compact
																											insulating
																											structure
																											which,
																											whilst
																											being
																											of
																											smaller
																											thickness,
																											provides
																											electric
																											strength
																											at
																											least
																											equal
																											to
																											that
																											of
																											known
																											mica
																											bands
																											of
																											the
																											prior
																											art
																											and,
																											in
																											addition,
																											a
																											substantially
																											higher
																											thermal
																											conductivity.
															 
				
		 EuroPat v2
			
																						Dies
																											hat
																											zur
																											Folge,
																											dass
																											die
																											Strömungsgeschwindigkeit
																											in
																											den
																											zuführenden
																											Kanälen
																											größer
																											ist,
																											so
																											dass
																											einerseits
																											die
																											Wärme
																											schneller
																											abgeführt
																											und
																											andererseits
																											die
																											Wahrscheinlichkeit
																											der
																											Ausbildung
																											von
																											Faserbrücken
																											(entlang
																											denen
																											bevorzugt
																											Spannungsüberschläge
																											auftreten)
																											vermindert
																											wird,
																											so
																											dass
																											sowohl
																											die
																											thermische,
																											als
																											auch
																											die
																											elektrische
																											Festigkeit
																											dieser
																											Bereiche
																											erhöht
																											wird.
																		
			
				
																						Consequently,
																											the
																											flow
																											speed
																											in
																											the
																											feed
																											channels
																											is
																											higher,
																											so
																											that
																											on
																											the
																											one
																											hand
																											the
																											heat
																											can
																											be
																											discharged
																											faster
																											while
																											on
																											the
																											other
																											hand
																											the
																											probability
																											of
																											formation
																											of
																											fiber
																											bridges
																											(along
																											which
																											voltage
																											flash-overs
																											preferably
																											occur)
																											is
																											reduced,
																											so
																											that
																											the
																											thermal
																											as
																											well
																											as
																											the
																											electrical
																											strength
																											of
																											these
																											areas
																											is
																											enhanced.
															 
				
		 EuroPat v2
			
																						Wird
																											eine
																											höhere
																											Durchschlagsspannung
																											(ein
																											Maß
																											für
																											die
																											elektrische
																											Festigkeit
																											von
																											Isolierflüssigkeiten)
																											als
																											die
																											von
																											Luft
																											gefordert,
																											kann
																											ein
																											Öl
																											oder
																											ein
																											Gas
																											mit
																											höherer
																											Durchschlagsspannung
																											anstelle
																											von
																											Luft
																											eingesetzt
																											werden.
																		
			
				
																						If
																											a
																											higher
																											disruptive
																											voltage
																											(a
																											measure
																											for
																											the
																											electrical
																											stability
																											of
																											insulating
																											fluids)
																											than
																											that
																											of
																											air
																											is
																											required,
																											an
																											oil
																											or
																											a
																											gas
																											having
																											a
																											higher
																											disruptive
																											voltage
																											can
																											be
																											used
																											instead
																											of
																											air.
															 
				
		 EuroPat v2
			
																						Mit
																											Hilfe
																											der
																											Klemmenabdeckkappe
																											32
																											wird
																											auch
																											bei
																											dieser
																											Anordnung
																											die
																											elektrische
																											Festigkeit
																											zwischen
																											den
																											Anschlussklemmen
																											erhöht.
																		
			
				
																						In
																											this
																											configuration
																											too,
																											the
																											electric
																											strength
																											between
																											the
																											connection
																											terminals
																											is
																											increased
																											by
																											means
																											of
																											the
																											terminal
																											covering
																											cap
																											32
																											.
															 
				
		 EuroPat v2
			
																						Insbesondere
																											ist
																											jedoch
																											die
																											elektrische
																											Festigkeit
																											speziell
																											im
																											Bereich
																											der
																											Kühlkanäle
																											9
																											zu
																											den
																											Teilwicklungen
																											3
																											und
																											5
																											verbessert.
																		
			
				
																						In
																											particular,
																											however,
																											the
																											electrical
																											strength
																											is
																											improved,
																											particularly
																											in
																											the
																											region
																											of
																											the
																											cooling
																											channels
																											9
																											using
																											a
																											respect
																											to
																											the
																											partial
																											windings
																											3
																											and
																											5.
															 
				
		 EuroPat v2
			
																						Der
																											Erfindung
																											liegt
																											die
																											Aufgabe
																											zugrunde,
																											bei
																											einem
																											elektrischen
																											Druckgasschalter
																											der
																											eingangs
																											genannten
																											Art
																											die
																											mechanische
																											Stabilität
																											des
																											Isolierstoffrohres
																											bei
																											vergleichbarem
																											Materialaufwand
																											zu
																											erhöhen
																											und
																											die
																											elektrische
																											Festigkeit
																											der
																											dem
																											Lichtbogen
																											zugewandten
																											Rohrwandung
																											zu
																											verbessern.
																		
			
				
																						SUMMARY
																											OF
																											THE
																											INVENTION
																											It
																											is
																											an
																											object
																											of
																											the
																											present
																											invention
																											in
																											a
																											gas
																											pressure
																											circuit
																											breaker
																											of
																											the
																											above
																											mentioned
																											type
																											to
																											increase
																											the
																											mechanical
																											stability
																											of
																											the
																											insulation
																											tube
																											at
																											comparable
																											cost
																											of
																											material
																											and
																											to
																											improve
																											the
																											electric
																											strength
																											of
																											the
																											tube
																											wall
																											toward
																											the
																											arc.
															 
				
		 EuroPat v2
			
																						Durch
																											die
																											erfindungsgemäße
																											konstruktive
																											Gestaltung
																											wird
																											die
																											elektrische
																											Festigkeit
																											gesteigert,
																											weil
																											in
																											Axialrichtung
																											Isolierstoff
																											und
																											Isolier-
																											bzw.
																											Löschgas
																											mehrfach
																											einander
																											abwechseln.
																		
			
				
																						By
																											the
																											design
																											according
																											to
																											the
																											invention,
																											the
																											electrical
																											strength
																											is
																											increased
																											because
																											the
																											insulating
																											material
																											and
																											the
																											insulating
																											or
																											quenching
																											gas
																											alternate
																											several
																											times
																											in
																											the
																											axial
																											direction.
															 
				
		 EuroPat v2
			
																						Eine
																											von
																											den
																											Innennuten
																											8
																											und
																											Innennutstegen
																											11
																											gebildete
																											innere
																											Oberfläche
																											wird
																											von
																											dem
																											gezogenen
																											Lichtbogen
																											thermisch
																											beansprucht,
																											die
																											Stützfunktion
																											und
																											die
																											elektrische
																											Festigkeit
																											kann
																											jedoch
																											relativ
																											lange
																											aufrechterhalten
																											werden.
																		
			
				
																						An
																											inner
																											surface
																											formed
																											by
																											the
																											inner
																											grooves
																											8
																											and
																											inner
																											groove
																											webs
																											11
																											is
																											thermally
																											stressed
																											by
																											the
																											drawn
																											arc,
																											yet
																											the
																											supporting
																											function
																											and
																											the
																											electric
																											strength
																											can
																											be
																											maintained
																											relatively
																											long.
															 
				
		 EuroPat v2
			
																						Einzelne
																											Oberfläche
																											behandelt
																											und
																											mit
																											einem
																											Silikonkleber
																											beschichtet
																											und
																											als
																											geschlitzte
																											Bänder
																											geliefert,
																											„PTFE
																											Klebeband“
																											genannt,
																											die
																											eine
																											ausgezeichnete
																											Wärmebeständigkeit,
																											mechanische
																											Festigkeit,
																											elektrische
																											Beständigkeit
																											und
																											Flammhemmung
																											.
																		
			
				
																						Single
																											surface
																											treated
																											and
																											coated
																											with
																											a
																											silicone
																											adhesive,
																											and
																											supplied
																											as
																											slitted
																											tapes,called
																											"
																											PTFE
																											Adhesive
																											Tape
																											",
																											which
																											exhibits
																											excellent
																											heat
																											resistance,mechanical
																											strength,
																											electrical
																											resistance,and
																											fire
																											retardancy
																											.
															 
				
		 ParaCrawl v7.1
			
																						Das
																											reine
																											Transformatoröl
																											hat
																											eine
																											elektrische
																											Festigkeit
																											von
																											200-250
																											kV
																											/
																											cm,
																											die
																											4-7
																											mal
																											höher
																											ist
																											als
																											die
																											von
																											Luft.
																		
			
				
																						The
																											pure
																											transformer
																											oil
																											has
																											an
																											electrical
																											strength
																											of
																											200-250kV/cm,
																											which
																											is
																											4-7
																											times
																											higher
																											than
																											air.
															 
				
		 ParaCrawl v7.1
			
																						Eine
																											derartige
																											Konstruktion
																											mit
																											öldurchströmter
																											Barrierestruktur
																											weist
																											eine
																											sehr
																											hohe
																											elektrische
																											Festigkeit
																											gegenüber
																											Potenzialen
																											auf,
																											die
																											sich
																											auf
																											der
																											dem
																											U
																											abgewandten
																											Seite
																											befinden.
																		
			
				
																						A
																											construction
																											of
																											this
																											type
																											having
																											a
																											barrier
																											structure
																											through
																											which
																											oil
																											is
																											flowing
																											can
																											have
																											a
																											very
																											high
																											electrical
																											strength
																											with
																											respect
																											to
																											potentials
																											that
																											are
																											located
																											on
																											the
																											side
																											that
																											is
																											remote
																											from
																											the
																											U-shaped
																											profile.
															 
				
		 EuroPat v2
			
																						Das
																											Fluid
																											kann
																											im
																											Innern
																											unter
																											einen
																											erhöhten
																											Druck
																											gesetzt
																											werden,
																											wodurch
																											im
																											Regelfall
																											die
																											elektrische
																											Festigkeit
																											des
																											Fluids
																											zusätzlich
																											verbessert
																											wird.
																		
			
				
																						The
																											fluid
																											can
																											be
																											pressurized
																											in
																											the
																											interior,
																											thus
																											in
																											general
																											additionally
																											improving
																											the
																											electrical
																											strength
																											of
																											the
																											fluid.
															 
				
		 EuroPat v2
			
																						Schaltgerüste
																											weisen
																											eine
																											Vielzahl
																											an
																											senkrechten
																											und
																											waagerechten
																											Leisten
																											auf,
																											in
																											welche
																											die
																											Leiterseile
																											aufwendig
																											mit
																											Rollen
																											und
																											kleinen
																											Pressspanplatten
																											eingeklemmt
																											sind
																											und
																											beziehen
																											ihre
																											elektrische
																											Festigkeit
																											ausschließlich
																											aus
																											der
																											Isolation
																											auf
																											den
																											Leiterseilen.
																		
			
				
																						Switching
																											frames
																											can
																											include
																											a
																											multiplicity
																											of
																											vertical
																											and
																											horizontal
																											strips
																											in
																											which
																											the
																											stranded
																											conductors
																											are
																											clamped
																											in
																											a
																											costly
																											and
																											laborious
																											manner
																											using
																											rollers
																											and
																											small
																											pressboard
																											plates
																											and
																											they
																											acquire
																											their
																											electrical
																											strength
																											exclusively
																											from
																											the
																											insulation
																											on
																											the
																											stranded
																											conductors.
															 
				
		 EuroPat v2
			
																						Gleichzeitig
																											gewährleistet
																											die
																											Verbindung
																											der
																											beiden
																											Isolationsbarrieren,
																											dass
																											zum
																											einen
																											eine
																											entsprechende
																											elektrische
																											Festigkeit
																											als
																											elektrische
																											Abschirmung
																											und
																											zum
																											anderen
																											eine
																											mechanische
																											Stabilität
																											des
																											Verbindungselements
																											gewährleistet
																											ist.
																		
			
				
																						At
																											the
																											same
																											time,
																											the
																											connection
																											of
																											the
																											two
																											isolating
																											barriers
																											ensures
																											that,
																											on
																											the
																											one
																											hand,
																											an
																											appropriate
																											electrical
																											strength
																											is
																											ensured
																											as
																											electrical
																											shielding
																											and
																											on
																											the
																											other
																											hand
																											that
																											mechanical
																											robustness
																											of
																											the
																											connecting
																											element
																											is
																											ensured.
															 
				
		 EuroPat v2
			
																						Feuchtigkeit
																											insbesondere
																											bei
																											Öl-Papier-Isolierungen
																											von
																											Leistungstransformatoren
																											verringert
																											deren
																											elektrische
																											Festigkeit,
																											beschleunigt
																											ihre
																											Alterung
																											und
																											kann
																											zur
																											Bildung
																											von
																											Gasblasen
																											in
																											der
																											Isolierung
																											führen.
																		
			
				
																						Humidity,
																											in
																											particular
																											in
																											the
																											case
																											of
																											oil-paper
																											insulations
																											of
																											power
																											transformers,
																											reduces
																											their
																											electrical
																											strength,
																											makes
																											them
																											age
																											faster
																											and
																											can
																											result
																											in
																											formation
																											of
																											gas
																											bubbles
																											in
																											the
																											insulation.
															 
				
		 EuroPat v2
			
																						Füllstoff
																											(B)
																											wird
																											in
																											die
																											Siliconzusammensetzungen
																											eingearbeitet,
																											um
																											eine
																											ausreichend
																											hohe
																											mechanische
																											und/oder
																											elektrische
																											Festigkeit
																											des
																											vernetzten
																											Siliconkautschuks
																											zu
																											erzielen.
																		
			
				
																						Filler
																											(B)
																											is
																											incorporated
																											into
																											the
																											silicone
																											composition
																											in
																											order
																											to
																											achieve
																											a
																											sufficiently
																											high
																											mechanical
																											and/or
																											electrical
																											strength
																											of
																											the
																											crosslinked
																											silicone
																											rubber.
															 
				
		 EuroPat v2
			
																						Die
																											Länge
																											a
																											des
																											Isolierkonus
																											13,
																											die
																											Dicke
																											b
																											des
																											Isolierkonus,
																											die
																											Neigung
																											a
																											des
																											Isolierkonus,
																											der
																											Radius
																											c
																											der
																											ringförmigen
																											Elektrode
																											14,
																											die
																											Länge
																											d
																											der
																											Elektrode,
																											die
																											Dicke
																											e
																											der
																											Elektrode,
																											der
																											Radius
																											f
																											der
																											Erdleiterverbindung
																											8,
																											die
																											Dicke
																											g
																											der
																											Isolierschicht
																											12
																											und
																											die
																											relative
																											Permittivität
																											der
																											eingesetzten
																											Isoliermaterialien
																											(Isolierschicht
																											12,
																											Isolierkonus
																											13,
																											isolierender
																											Füllstoff
																											16,
																											Isolatoren
																											10)
																											sind
																											derart
																											aufeinander
																											abgestimmt,
																											daß
																											in
																											keinem
																											Bereich
																											die
																											Beanspruchung
																											durch
																											die
																											elektrische
																											Feldstärke
																											die
																											jeweilige
																											elektrische
																											Festigkeit
																											übersteigt.
																		
			
				
																						The
																											length
																											a
																											of
																											the
																											insulating
																											cone
																											13,
																											the
																											thickness
																											b
																											of
																											the
																											insulating
																											cone,
																											the
																											inclination
																											a
																											of
																											the
																											insulating
																											cone,
																											the
																											radius
																											c
																											of
																											the
																											annular
																											electrode
																											14,
																											the
																											length
																											d
																											of
																											the
																											electrode,
																											the
																											thickness
																											e
																											of
																											the
																											electrode,
																											the
																											radius
																											f
																											of
																											the
																											ground
																											conductor
																											connection
																											8,
																											the
																											thickness
																											g
																											of
																											the
																											insulating
																											layer
																											12,
																											and
																											the
																											relative
																											permittivity
																											of
																											the
																											insulating
																											materials
																											that
																											are
																											employed
																											(the
																											insulating
																											layer
																											12,
																											the
																											insulating
																											cone
																											13,
																											the
																											insulating
																											filler
																											16,
																											the
																											insulators
																											10)
																											are
																											matched
																											to
																											one
																											another
																											in
																											such
																											a
																											way
																											that
																											loading
																											due
																											to
																											the
																											electric
																											field
																											strength
																											does
																											not
																											exceed
																											the
																											respective
																											electric
																											strength
																											in
																											any
																											region.
															 
				
		 EuroPat v2
			
																						Zur
																											zeitlichen
																											Minimierung
																											des
																											durch
																											den
																											Leistungshalbleiter
																											fließenden
																											Laststroms
																											wird
																											über
																											einen
																											Stromwandler
																											der
																											Kommutierungszeitpunkt
																											erfasst
																											und
																											der
																											Stromfluss
																											durch
																											den
																											Halbleiter
																											nur
																											so
																											lange
																											aufrechterhalten,
																											bis
																											die
																											sich
																											öffnende
																											mechanische
																											Schaltstrecke
																											eine
																											ausreichende
																											elektrische
																											Festigkeit
																											erreicht
																											hat.
																		
			
				
																						In
																											order
																											to
																											minimize
																											the
																											time
																											of
																											the
																											load
																											current
																											flowing
																											through
																											the
																											power
																											semiconductor,
																											the
																											commutation
																											time
																											is
																											detected
																											by
																											a
																											current
																											transformer,
																											and
																											the
																											current
																											flow
																											through
																											the
																											semiconductor
																											is
																											maintained
																											only
																											until
																											the
																											opening
																											mechanical
																											switching
																											path
																											has
																											reached
																											a
																											sufficient
																											electrical
																											stability.
															 
				
		 EuroPat v2
			
																						Die
																											elektrische
																											Festigkeit
																											der
																											HVI
																											®
																											Leitung
																											wurde
																											ermittelt
																											und
																											wird
																											im
																											Rahmen
																											unseres
																											Qualitätsmanagementsystems
																											kontinuierlich
																											überwacht.
																		
			
				
																						The
																											electrical
																											resistance
																											of
																											the
																											HVI
																											®
																											Conductor
																											was
																											determined
																											and
																											is
																											controlled
																											continu-ously
																											within
																											the
																											scope
																											of
																											our
																											quality
																											management
																											system.
															 
				
		 ParaCrawl v7.1