Übersetzung für "Reibungsverlust" in Englisch

Friction losses are around 30% of total energy.

The friction loss is minimal thanks to the use of Teflon-coated pistons.

Hardly any friction loss is guaranteed thanks to the ball-bearing axis.

The factor c2 stands for Euler's friction loss.

The symmetrical drive takes place without loss of friction on the chain and gearwheels.

The relationships between frictional loss, viscosity and nu are known (R.

They are not sealed off from the axial bore, though, because that could cause an uncontrollable loss of friction.

In this way, the contact pressure of the sealing segment on the shaft is reduced, and the loss due to friction is less.

We control production processes precisely and without friction losses, from charging through to dosing and reactor processes and thus guarantee a...

The friction in the process did not allow for meaningful results in an operational time frame using humans, PDFs and tenacity alone.

The friction in the process did not allow for meaningful results in an operational time frame using humans, PDFs The researchers had to lever up their human minds with technology to dive deeper, to explore non-obvious hypotheses, and in fact, insights emerged.

The frictional loss of the entire drive amounts to approximately 4 to 5 watts, which represents a known constant and, therefore, can easily be added to the calculations.

The resulting flow rate is then exactly that at which the potential energy of the electrolyte is dissipated by the frictional loss.

An inflow of the gap mass flow into the main mass flow therefore takes place substantially with the same circumferential component, so that as a result an additional friction loss is averted.

The point bearing of the ball in the hollow socket has a low frictional loss and by nature has no bearing play.

That has on the one hand the advantage that there are no direction-changing locations with corresponding frictional losses and wear.

A relatively high friction loss occurs during the motion procedure due to the use of the most widely varied mechanical transmission components so that the efficiency of an appliance of this type is not optimum.

While this liquid is being transferred, damping is caused by the "displacement" of the quantity of liquid contained in the line 4, the level of damping increasing with the quantity of liquid to be displaced and the increased friction loss which is determined by the shearing rate and the viscosity.

The spring-powered swivel arm, when pressing against the Archimedean spiral, acts as a driving force with a component of force and thus compensates at least for the friction loss caused through the downward pressure.

We offer the ideal solution for every challenge; be that decreasing friction losses and air resistance, improving ancillary power requirements or ensuring a lower empty weight.

Digital archives attempt to transfer objects from the “private domain” of researchers or the “shared domain” in which a team works on the data, for example, to the third, public domain with a minimum of efficiency losses.

Also, with controlled lubrication and minimal frictional losses, Superbolt reaches high preloads with superb accuracy and repeatability.

Therefore software patents weaken innovation and the economic situation by introducing a kind of artificial friction loss which subsidizes part of the legal system.

Up to this reversing valve, only a short duct length has therefore to be surmounted by the idle air, which considerably reduces friction loss and thus the power required to expel the idle air.

The penetration resistance becomes too high and the efficiency thus decreases (too much frictional loss); the wear is predominantly rotationally symmetrical.

In this situation, a higher frictional loss at the slip clutch however results if the driving speed continues to be low.

This entails a loss of friction on the underside of the nut 4, so that the latter can then be turned, for example retightened, on the thread of the bolt.