Übersetzung für "Stark gebogen" in Englisch

Their beak is short, solid, and curved, typical for an omnivore bird.

Nails strong, curved and of dark colour.

The nails are strong, curved and of a dark colour.

Her legs were severely bent and she was dragging herself along the shopping mall.

For this to work, it's important that the fiber is not bent too much.

The horns of the female are more slender and not so curved as those of the male.

The mouth is strongly curved, containing on either side 15–16 upper tooth rows and 15–17 lower tooth rows.

Provided, at both ends of the cathode bars are flexible conductor strips 14,16. As shown in FIG. 2, when the busbars 18,20,22 and 24 are close to the adjacent side of the cell, the flexible conductor strips are strongly bent.

This is a foot deformity in which the anterior part of the foot bends too far inward.

In this way the protective tube can be bent considerably without the conductive foil becoming excessively bent and thereby being possibly crumpling or tearing.

In addition, the spring part 115 is supported on the top borders 114' of the extensions 114 sooner or later by its shoulders 116, with the result that that region of the spring part 115 which is stiffened by the borders 115" is also bent elastically to a more or less pronounced extent.

In addition, the spring part 115 is supported on the top borders 114 ? of the extensions 114 sooner or later by its shoulders 116, with the result that that region of the spring part 115 which is stiffened by the borders 115 ? is also bent elastically to a more or less pronounced extent.

On the whole, the joining connection can be used in all applications in the case of which pipes are mounted on flanges after they were inserted in their duct, particularly in the case of exhaust gas elbows, in the case of which are secure clamping-in for establishing the weld joint is very difficult to carry out without changing the mutually positioned plug-in partners in their relative position because of the relatively strongly bent pipes.

The tongue is therefore moved into the corresponding groove of an adjacent panel owing to a rotary movement, without the flank with the recess having to be bent to a great extent.

At difficult passages, for example, where the cable must bend sharply, the stylet is often slightly retracted, so that the distal end of the electrode cable displays maximum pliancy.

Major problems can arise, for instance, if the fiber breaks or is bent so severely that total reflection can no longer take place.

Flat curved levers 39 and 40 are severely curved, in order to provide a free space for the heads of shafts 45 or 48.

In the region of these shoulders 15,16, the cut edge 10 is bent more or less sharply towards the bottom of the profile bar.

The outflow side regulating lip 5 of the throttling insert 1 is curved to a greater or lesser extent outwards in the case of an increasing water pressure and forms an elastic soft boundary, so that the water leaving throttling insert 1 can expand without leading to a lot of noise.

This also prevents the band 3 from being bent sharply in the region in which it merges integrally into the lock body 1, which might prejudice both the strength of the band and also the mechanical properties of the lock body.

But about 400 men in every 100,000 suffer from the condition of severely bent or curved erect penis, so extreme that it makes intercourse painful for both partners or completely impossible.

The measuring systems are suitable for materials with low stiffness but also materials which show dramatic changes in dynamic mechanical properties and which could otherwise show strong bowing under load.

The fragment was now transferred to a fresh leaf, which next morning (6th) was strongly inflected, and remained so until the 11th.

Beak This often is bent with the rhinoceros-birds strongly downward and becomes, with exception of the type Tokos, from a horny protuberance (just the "rhinoceros") protrudes.

The front part of the central loop of the clip is bent sharply downward so as to provide tip-over protection (the center loop is the tip-over protection) when in the installed state (that is in the final installation position).

In this case the lower pull exerts a supportive and reinforcing effect and prevents that the free ends of the cantilever arm bent outwardly too much without being simultaneously lifted to the desired extent.

As explained above, however, since a low resonant frequency of vibration sensor 1 is advantageous, the softest possible leaf springs 5 are used, which could possibly be bent too greatly by the weight force of mass block 3 .