Translation of "High strength concrete" in German
																						For
																											this
																											purpose,
																											high-early-strength
																											concrete
																											should
																											be
																											used.
																		
			
				
																						Hierfür
																											sollte
																											frühhochfester
																											Beton
																											Anwendung
																											finden.
															 
				
		 EuroPat v2
			
																						High
																											and
																											ultrahigh-strength
																											concrete
																											increases
																											the
																											structural
																											stability
																											of
																											buildings.
																		
			
				
																						Mit
																											hochfestem
																											oder
																											ultrahochfestem
																											Beton
																											wird
																											die
																											strukturelle
																											Stabilität
																											von
																											Bauwerken
																											sichergestellt.
															 
				
		 ParaCrawl v7.1
			
																						The
																											strengthening
																											element
																											34
																											is
																											constructed
																											from
																											prefabricated
																											segments
																											39
																											and
																											40
																											made
																											of
																											high-strength
																											concrete.
																		
			
				
																						Das
																											Verstärkungselement
																											34
																											ist
																											aus
																											vorgefertigten
																											Segmenten
																											39
																											und
																											40
																											aus
																											hochfestem
																											Beton
																											aufgebaut.
															 
				
		 EuroPat v2
			
																						As
																											part
																											of
																											this
																											research
																											programme,
																											the
																											new
																											composite
																											material,
																											made
																											of
																											high-strength
																											fine
																											concrete
																											and
																											high-performance
																											fibres
																											(made
																											of
																											different
																											materials
																											such
																											as
																											alkali-resistant
																											glass,
																											later
																											mainly
																											carbon
																											fibres),
																											was
																											developed
																											and
																											researched,
																											as
																											well
																											as
																											transferred
																											into
																											practice
																											by
																											pilot
																											projects
																											in
																											cooperation
																											with
																											construction
																											companies.
																		
			
				
																						Im
																											Rahmen
																											dieses
																											Forschungsprogramms
																											wurde
																											das
																											neue
																											Verbundmaterial
																											Textilbeton
																											aus
																											hochfestem
																											Feinbeton
																											und
																											Hochleistungsfasern
																											(aus
																											verschiedenen
																											Materialien
																											wie
																											alkaliresistentem
																											Glas,
																											später
																											vor
																											allem
																											Kohlenstofffasern)
																											entwickelt
																											und
																											erforscht
																											sowie
																											in
																											ersten
																											Pilotprojekten
																											in
																											Zusammenarbeit
																											mit
																											Firmen
																											v.
																											a.
																											aus
																											der
																											Bauwirtschaft
																											in
																											die
																											Praxis
																											überführt.
															 
				
		 WikiMatrix v1
			
																						Suitable
																											building
																											materials
																											to
																											which
																											the
																											additive
																											according
																											to
																											the
																											invention
																											can
																											be
																											added
																											in
																											order
																											to
																											improve
																											the
																											properties
																											are
																											primarily
																											cement
																											mortar
																											and
																											concrete,
																											the
																											additives
																											being
																											suitable
																											both
																											for
																											pourable
																											concrete
																											(keeping
																											the
																											amount
																											of
																											mixing
																											water
																											constant)
																											and
																											for
																											high-strength
																											concrete,
																											less
																											mixing
																											water
																											being
																											used
																											in
																											the
																											latter
																											case
																											as
																											a
																											result
																											of
																											the
																											additive
																											according
																											to
																											the
																											invention.
																		
			
				
																						Als
																											Baustoffe,
																											denen
																											das
																											erfindungsgemäße
																											Zusatzmittel
																											zur
																											Verbesserung
																											der
																											Eigenschaften
																											zugegeben
																											werden
																											kann,
																											kommen
																											in
																											erster
																											Linie
																											Zementmörtel
																											und
																											Beton
																											in
																											Frage,
																											wobei
																											das
																											Mittel
																											sowohl
																											für
																											Fließbeton
																											(bei
																											Beibehaltung
																											der
																											Menge
																											an
																											Anmachwasser)
																											als
																											auch
																											hochfesten
																											Beton
																											geeignet
																											ist,
																											wobei
																											im
																											letzteren
																											Fall
																											durch
																											das
																											erfindurgsgemäße
																											Mittel
																											Anmachvasser
																											eingespart
																											wird.
															 
				
		 EuroPat v2
			
																						Due
																											to
																											the
																											prevailing
																											high
																											moisture
																											content
																											and
																											the
																											high
																											diffusion
																											resistance
																											vis
																											a
																											vis
																											water
																											vapor,
																											very
																											high
																											pressures
																											necessarily
																											result
																											inside
																											the
																											high-strength
																											prefabricated
																											concrete
																											members
																											under
																											fire,
																											which
																											finally
																											lead
																											to
																											explosive
																											spalling,
																											in
																											particular
																											when
																											the
																											concrete
																											is
																											simultaneously
																											subjected
																											to
																											high
																											mechanical
																											stress.
																		
			
				
																						Wegen
																											des
																											vorhandenen
																											hohen
																											Feuchtigkeitsgehalts
																											und
																											des
																											hohen
																											Diffusionswiderstands
																											für
																											Wasserdampf
																											entstehen
																											bei
																											Brandbeanspruchung
																											im
																											Inneren
																											der
																											hochfesten
																											Betonbauteile
																											zwangsläufig
																											sehr
																											hohe
																											Drücke,
																											was
																											schließlich
																											zu
																											explosiven
																											Abplatzungen
																											führt,
																											insbesondere
																											wenn
																											der
																											Beton
																											gleichzeitig
																											hohen
																											mechanischen
																											Spannungen
																											ausgesetzt
																											ist.
															 
				
		 EuroPat v2
			
																						For
																											this
																											reason,
																											very
																											narrow
																											limits
																											are
																											set
																											to
																											the
																											use
																											of
																											these
																											building
																											materials,
																											in
																											particular
																											of
																											high-strength
																											concrete,
																											or
																											very
																											expensive
																											technical
																											measures,
																											such
																											as
																											an
																											outer
																											network
																											reinforcement
																											for
																											preventing
																											the
																											falling
																											off
																											of
																											the
																											detached
																											or
																											spalled
																											concrete
																											core
																											or
																											expensive
																											insulations
																											against
																											the
																											fast
																											penetration
																											of
																											heat
																											in
																											the
																											case
																											of
																											fire
																											are
																											necessary.
																		
			
				
																						Dadurch
																											sind
																											der
																											Anwendung
																											dieser
																											Baumaterialien,
																											insbesondere
																											der
																											von
																											hochfestem
																											Beton,
																											sehr
																											enge
																											Anwendungsgrenzen
																											gesetzt
																											bzw.
																											es
																											sind
																											aufwendige
																											technische
																											Maßnahmen,
																											wie
																											beispielsweise
																											eine
																											äußere
																											Netzbewehrung
																											zur
																											Verhinderung
																											des
																											Abfallens
																											der
																											gelösten
																											oder
																											abgeplatzten
																											Betonschale
																											oder
																											aufwendige
																											Isolierungen
																											gegen
																											das
																											schnelle
																											Eindringen
																											von
																											Hitze
																											im
																											Brandfall
																											erforderlich.
															 
				
		 EuroPat v2
			
																						High
																											compressive
																											strength
																											of
																											concrete
																											makes
																											it
																											possible
																											to
																											clamp
																											the
																											pile
																											along
																											the
																											perimeter
																											with
																											such
																											a
																											force
																											using
																											the
																											method
																											according
																											to
																											the
																											invention
																											so
																											as
																											to
																											"anchor"
																											the
																											reinforcing
																											bars
																											in
																											the
																											concrete
																											and
																											to
																											eliminate
																											its
																											deformation
																											above
																											and
																											below
																											the
																											breakoff
																											line.
																		
			
				
																						Die
																											hohe
																											Druckfestigkeit
																											des
																											Betons
																											erlaubt
																											in
																											dem
																											erfindungsgemäßen
																											Verfahren
																											das
																											Zusammendrücken
																											des
																											Pfahls
																											von
																											allen
																											Seiten
																											mit
																											solcher
																											Kraft,
																											daß
																											die
																											Bewehrung
																											im
																											Beton
																											gleichsam
																											verankert
																											ist
																											und
																											sich
																											nicht
																											über
																											und
																											unter
																											der
																											Zerreißebene
																											deformiert.
															 
				
		 EuroPat v2
			
																						Use
																											of
																											water-dispersible
																											or
																											water-soluble
																											polyether-urethanes,
																											which
																											optionally
																											contain
																											isocyanate
																											groups,
																											as
																											additives
																											for
																											inorganic
																											binders
																											in
																											the
																											preparation
																											of
																											a
																											building
																											material,
																											particularly
																											a
																											high-density
																											or
																											high-strength
																											mortar
																											or
																											concrete
																											composition.
																		
			
				
																						Die
																											Erfindung
																											betrifft
																											die
																											Verwendung
																											wasserdispergierbarer
																											bzw.
																											wasserlöslicher,
																											gegebenenfalls
																											Isocyanatgruppen
																											aufweisender
																											Polyetherurethane
																											als
																											Zusatzmittel
																											für
																											anorganische
																											Bindemittel
																											bei
																											der
																											Herstellung
																											von
																											hochdichten
																											bzw.
																											hochfesten
																											Mörtelmassen
																											oder
																											Beton.
															 
				
		 EuroPat v2
			
																						By
																											concreting
																											the
																											bearing
																											plate
																											into
																											the
																											part
																											of
																											the
																											structure
																											to
																											be
																											prestresssed,
																											the
																											introduction
																											of
																											forces
																											from
																											the
																											stressing
																											anchorage
																											to
																											the
																											corresponding
																											part
																											of
																											the
																											structure
																											of
																											high-strength
																											concrete
																											becomes
																											optimal.
																		
			
				
																						Durch
																											die
																											Einbetonierung
																											der
																											Ankerplatte
																											in
																											das
																											vorzuspannende
																											Bauwerksteil
																											wird
																											die
																											Krafteinleitung
																											von
																											der
																											Spannverankerung
																											auf
																											das
																											entsprechende
																											Bauwerksteil
																											aus
																											hochfestem
																											Beton
																											optimal.
															 
				
		 EuroPat v2
			
																						The
																											bearing
																											plate,
																											consisting
																											of
																											a
																											steel
																											casing
																											surrounding
																											a
																											ring
																											of
																											mortar-like,
																											hardened
																											mass,
																											is
																											concreted
																											into
																											the
																											part
																											of
																											the
																											structure,
																											using
																											high-strength
																											concrete.
																		
			
				
																						Die
																											Ankerplatte,
																											die
																											aus
																											einem
																											Stahlmantel
																											besteht,
																											welche
																											einen
																											Ring
																											aus
																											mörtelartiger
																											ausgehärterter
																											Masse
																											umschliesst,
																											wird
																											im
																											Bauwerksteil
																											aus
																											hochfestem
																											Beton
																											einbetoniert.
															 
				
		 EuroPat v2
			
																						On
																											the
																											left,
																											Water
																											Tower
																											Place,
																											77
																											stories
																											of
																											modern
																											highrise
																											construction
																											using
																											the
																											latest
																											innovations
																											in
																											both
																											high
																											strength
																											concrete
																											and
																											reinforcing
																											steel.
																		
			
				
																						Links
																											Water
																											Tower
																											Place
																											mit
																											77
																											Geschossen
																											in
																											moderner
																											Hochhauskonstruktion,
																											bei
																											dem
																											die
																											neuesten
																											Erkenntnisse
																											über
																											hochfesten
																											Beton
																											und
																											Bewehrungsstähle
																											berücksichtigt
																											wurden.
															 
				
		 EUbookshop v2
			
																						The
																											extremely
																											high
																											strength
																											of
																											the
																											concrete
																											can
																											reduce
																											its
																											thickness
																											and,
																											as
																											a
																											result,
																											significantly
																											lower
																											the
																											additional
																											load
																											on
																											the
																											bridge.
																		
			
				
																						Die
																											extrem
																											hohe
																											Festigkeit
																											des
																											Betons
																											kann
																											dessen
																											Dicke
																											und
																											somit
																											die
																											zusätzliche
																											Gewichtsbelastung
																											für
																											die
																											Brücke
																											deutlich
																											reduzieren.
															 
				
		 ParaCrawl v7.1
			
																						As
																											above
																											mentioned,
																											a
																											high-strength
																											fine-grained
																											concrete
																											was
																											used
																											for
																											the
																											textile-reinforced
																											concrete,
																											which
																											is
																											impermeable
																											to
																											water
																											and
																											weather
																											resistant
																											without
																											any
																											coating
																											due
																											to
																											its
																											dense
																											structure
																											and
																											its
																											smooth
																											concrete
																											surface.
																		
			
				
																						Wie
																											eingangs
																											erwähnt,
																											wurde
																											für
																											die
																											Textilbetonschalen
																											ein
																											hochfester
																											Feinbeton
																											eingesetzt,
																											der
																											aufgrund
																											seines
																											dichten
																											Gefüges
																											und
																											seiner
																											glatten
																											Betonoberfläche
																											auch
																											ohne
																											weitere
																											Beschichtung
																											wasserundurchlässig
																											und
																											witterungsbeständig
																											ist.
															 
				
		 ParaCrawl v7.1
			
																						From
																											EP-A
																											1
																											225
																											283
																											a
																											construction
																											element
																											is
																											known
																											for
																											the
																											thermal
																											insulation
																											between
																											two
																											structural
																											parts,
																											in
																											addition
																											to
																											an
																											insulating
																											body
																											also
																											comprising
																											compression
																											elements,
																											that
																											transfer
																											pressures,
																											connected
																											to
																											both
																											structural
																											parts,
																											and
																											are
																											made
																											from
																											high-strength
																											concrete.
																		
			
				
																						Aus
																											der
																											EP-A
																											1
																											225
																											283
																											ist
																											ein
																											Bauelement
																											zur
																											Wärmedämmung
																											zwischen
																											zwei
																											Bauteilen
																											bekannt,
																											das
																											neben
																											einem
																											Isolierkörper
																											auch
																											Druckkraft
																											übertragende
																											und
																											an
																											beide
																											Bauteile
																											angeschlossene
																											Druckelemente
																											aufweist,
																											die
																											aus
																											hochfestem
																											Beton
																											bestehen.
															 
				
		 EuroPat v2
			
																						Due
																											to
																											the
																											fact
																											that
																											such
																											a
																											concrete
																											is
																											slightly
																											more
																											expensive
																											than
																											conventional
																											site
																											concrete,
																											of
																											course,
																											here
																											the
																											novel
																											high-strength
																											concrete
																											can
																											be
																											limited
																											to
																											those
																											areas
																											that
																											are
																											to
																											be
																											thermally
																											optimized
																											and
																											for
																											this
																											purpose
																											either
																											the
																											high-strength
																											concrete
																											is
																											prefabricated,
																											as
																											in
																											the
																											component
																											mentioned
																											for
																											thermal
																											insulation,
																											and
																											thus
																											can
																											be
																											further
																											processed
																											as
																											a
																											prefabricated
																											element,
																											or
																											by
																											using
																											a
																											mold
																											on
																											site
																											when
																											casting
																											high-strength
																											concrete,
																											which
																											is
																											then
																											removed
																											after
																											the
																											high-strength
																											concrete
																											has
																											hardened,
																											and
																											subsequently
																											the
																											more
																											cost-effective
																											site
																											concrete
																											can
																											be
																											cast
																											abutting
																											this
																											high-strength
																											concrete.
																		
			
				
																						Da
																											natürlich
																											ein
																											solcher
																											Beton
																											etwas
																											teurer
																											ist
																											als
																											ein
																											normaler
																											Ortbeton,
																											kann
																											man
																											hierzu
																											den
																											neuen
																											hochfesten
																											Beton
																											auf
																											diejenigen
																											Bereiche
																											beschränken,
																											die
																											wärmeoptimiert
																											werden
																											sollen,
																											wozu
																											man
																											entweder
																											den
																											hochfesten
																											Beton
																											-
																											wie
																											beim
																											genannten
																											Bauteil
																											zur
																											Wärmedämmung
																											-
																											vorfertigen
																											und
																											so
																											als
																											Fertigelement
																											weiterverarbeiten
																											kann
																											oder
																											indem
																											man
																											beim
																											Vergießen
																											des
																											hochfesten
																											Betons
																											auf
																											der
																											Baustelle
																											mit
																											einer
																											Schalung
																											arbeitet,
																											die
																											dann
																											nach
																											dem
																											Abbinden
																											des
																											hochfesten
																											Betons
																											entfernt
																											wird,
																											woraufhin
																											dann
																											der
																											kostengünstigere
																											Ortbeton
																											gegen
																											diesen
																											hochfesten
																											Beton
																											gegossen
																											werden
																											kann.
															 
				
		 EuroPat v2
			
																						The
																											wood
																											concrete
																											composite
																											system
																											(100,
																											200)
																											of
																											claim
																											1
																											wherein
																											the
																											concrete
																											construction
																											unit
																											(150,
																											151,
																											152,
																											240,
																											241)
																											is
																											made
																											out
																											of
																											one
																											of
																											a
																											group
																											of
																											concrete
																											types
																											consisting
																											of
																											ordinary
																											concrete,
																											high-strength
																											concrete,
																											prestressed
																											concrete,
																											composite
																											concrete,
																											lightweight
																											concrete,
																											aerated
																											concrete
																											and
																											asphalted
																											concrete
																											which
																											may
																											hold
																											additional
																											non-mineral
																											additives
																											selected
																											from
																											a
																											group
																											of
																											additives
																											consisting
																											of
																											plastic,
																											polystyrene,
																											and
																											wood.
																		
			
				
																						Holz-Beton-Verbundsysteme
																											(100,
																											200)
																											nach
																											einem
																											der
																											Ansprüche
																											1
																											bis
																											18,
																											dadurch
																											gekennzeichnet,
																											dass
																											die
																											Betonbauteile
																											(150,
																											151,
																											152,
																											240,
																											241)
																											aus
																											Normalbeton,
																											hochfestem
																											Beton,
																											Spannbeton,
																											Verbundbeton,
																											Estrichbeton,
																											Leichtbeton,
																											Porenbeton
																											und/oder
																											Asphaltbeton
																											besteht
																											bzw.
																											bestehen
																											und
																											sofern
																											gewollt
																											Zuschläge
																											in
																											nicht
																											mineralischer
																											Form,
																											wie
																											z.B.
																											Kunststoff,
																											Styropor,
																											Holz
																											aufweisen
																											können.
															 
				
		 EuroPat v2
			
																						Therefore,
																											an
																											advantageous
																											concrete
																											composition
																											comprises,
																											for
																											example,
																											titanium
																											minerals
																											that
																											are
																											included
																											at
																											a
																											portion
																											of
																											approximately
																											one
																											third
																											by
																											volume
																											and/or
																											a
																											portion
																											of
																											approximately
																											50%
																											or
																											more
																											by
																											weight,
																											the
																											concrete
																											is
																											produced
																											without
																											any
																											siliceous
																											sand,
																											and
																											that
																											the
																											titanium
																											minerals
																											show
																											a
																											grain
																											size
																											of
																											no
																											more
																											than
																											0.5
																											mm,
																											as
																											known
																											for
																											other
																											additives
																											with
																											regard
																											to
																											types
																											of
																											high-strength
																											concrete,
																											however
																											uncommon
																											for
																											the
																											mining
																											of
																											titanium
																											minerals
																											(normally
																											the
																											maximum
																											commercial
																											grain
																											size
																											amounts
																											to
																											approximately
																											5
																											mm.)
																		
			
				
																						Eine
																											vorteilhafte
																											Betonzusammensetzung
																											besteht
																											somit
																											beispielsweise
																											daraus,
																											dass
																											die
																											Titan-Minerale
																											einen
																											Volumenanteil
																											an
																											Beton
																											in
																											der
																											Größenordnung
																											von
																											etwa
																											einem
																											Drittel
																											aufweisen
																											und/oder
																											einen
																											Massenanteil
																											in
																											der
																											Größenordnung
																											von
																											etwa
																											50%
																											oder
																											mehr
																											aufweisen,
																											dass
																											der
																											Beton
																											ganz
																											ohne
																											Quarzsand
																											hergestellt
																											wird
																											und
																											dass
																											die
																											Titan-Minerale
																											eine
																											Korngröße
																											von
																											maximal
																											0,5
																											mm
																											aufweisen,
																											wie
																											es
																											an
																											sich
																											für
																											hochfeste
																											Betone
																											hinsichtlich
																											anderer
																											Zuschlagstoffe
																											bekannt
																											ist,
																											jedoch
																											für
																											den
																											Abbau
																											von
																											Titan-Mineralen
																											unüblich
																											ist
																											(normalerweise
																											liegt
																											die
																											handelsübliche
																											maximale
																											Korngröße
																											bei
																											etwa
																											5
																											mm).
															 
				
		 EuroPat v2
			
																						Additionally,
																											the
																											present
																											invention
																											shall
																											explicitly
																											apply
																											to
																											a
																											construction
																											element
																											for
																											thermal
																											insulation,
																											including
																											concrete
																											compression
																											elements,
																											as
																											generally
																											described
																											in
																											EP-A
																											1
																											225
																											283,
																											with
																											its
																											contents
																											being
																											incorporated
																											herein
																											by
																											reference
																											as
																											if
																											fully
																											set
																											forth,
																											however,
																											used
																											with
																											an
																											essential
																											further
																											development
																											such
																											that
																											instead
																											of
																											a
																											“standard”
																											high-strength
																											concrete
																											the
																											thermally
																											insulating—load-bearing
																											concrete
																											according
																											to
																											the
																											invention
																											is
																											used,
																											comprising
																											titanium
																											minerals
																											as
																											additives,
																											with
																											the
																											titanium
																											minerals
																											comprising
																											ilmenite
																											or
																											titiferous
																											iron
																											ore,
																											particularly
																											ilmenite.
																		
			
				
																						Die
																											vorliegende
																											Erfindung
																											soll
																											sich
																											ausdrücklich
																											auch
																											auf
																											ein
																											Bauelement
																											zur
																											Wärmedämmung
																											mit
																											Beton-Druckelement
																											erstrecken,
																											wie
																											es
																											grundsätzlich
																											in
																											der
																											EP-A
																											1
																											225
																											283
																											beschrieben
																											ist,
																											auf
																											deren
																											Inhalt
																											hier
																											ausdrücklich
																											Bezug
																											genommen
																											wird,
																											jedoch
																											mit
																											der
																											wesentlichen
																											Weiterentwicklung,
																											dass
																											dabei
																											anstatt
																											eines
																											"normalen"
																											hochfesten
																											Betons
																											der
																											erfindungsgemäße
																											Wärmedämm-Trag-Baustoff
																											verwendet
																											wird,
																											der
																											Titan-Minerale
																											als
																											Zusatzstoff
																											aufweist,
																											wobei
																											die
																											Titan-Minerale
																											aus
																											Titaneisen
																											oder
																											Titaneisenerz
																											und
																											insbesondere
																											aus
																											Ilmenit
																											bestehen.
															 
				
		 EuroPat v2
			
																						Due
																											to
																											the
																											fact
																											that
																											in
																											such
																											a
																											structural
																											element
																											for
																											thermal
																											insulation
																											the
																											compression
																											element,
																											via
																											which
																											the
																											compressive
																											forces
																											are
																											transferred
																											to
																											the
																											adjacent
																											structural
																											parts,
																											comprises
																											the
																											concrete
																											material
																											according
																											to
																											the
																											invention
																											the
																											thermally
																											insulating
																											features
																											can
																											be
																											considerably
																											improved
																											according
																											to
																											the
																											invention
																											in
																											reference
																											to
																											structural
																											elements
																											for
																											thermal
																											insulation
																											of
																											prior
																											art,
																											with
																											their
																											compression
																											elements
																											comprising
																											conventional
																											high-strength
																											concrete
																											or
																											stainless
																											steel,
																											without
																											suffering
																											any
																											disadvantages
																											concerning
																											their
																											load
																											bearing
																											behavior.
																		
			
				
																						Dadurch
																											dass
																											bei
																											einem
																											solchen
																											Bauelement
																											zur
																											Wärmedämmung
																											das
																											Druckelement,
																											über
																											das
																											die
																											Druckkräfte
																											zwischen
																											den
																											beiden
																											angrenzenden
																											Gebäudeteilen
																											übertragen
																											wird,
																											aus
																											dem
																											erfindungsgemäßen
																											Beton-Baustoff
																											besteht,
																											lassen
																											sich
																											erfindungsgemäß
																											die
																											Wärmedämmeigenschaften
																											im
																											Vergleich
																											zu
																											den
																											bekannten
																											Bauelementen
																											zur
																											Wärmedämmung,
																											deren
																											Druckelemente
																											aus
																											herkömmlichem
																											hochfesten
																											Beton
																											oder
																											aus
																											Edelstahl
																											bestehen,
																											wesentlich
																											verbessern
																											und
																											das
																											ohne
																											Nachteile
																											hinsichtlich
																											des
																											Tragverhaltens.
															 
				
		 EuroPat v2
			
																						Surprisingly
																											it
																											has
																											now
																											shown
																											that
																											the
																											titanium
																											minerals
																											and
																											particularly
																											ilmenite
																											are
																											able
																											not
																											only
																											to
																											considerably
																											increase
																											the
																											strength
																											but
																											particularly
																											also
																											the
																											thermally
																											insulating
																											features
																											of
																											the
																											high-strength
																											concrete,
																											in
																											an
																											exemplary
																											case
																											by
																											50%.
																		
			
				
																						Es
																											hat
																											sich
																											nun
																											überraschenderweise
																											herausgestellt,
																											dass
																											sich
																											durch
																											die
																											Titan-Minerale
																											und
																											insbesondere
																											durch
																											Ilmenit
																											aber
																											nicht
																											nur
																											die
																											Festigkeit,
																											sondern
																											vor
																											allem
																											auch
																											die
																											Wärmedämmeigenschaften
																											des
																											hochfesten
																											Betons
																											deutlich
																											verbessern
																											lassen,
																											in
																											einem
																											Beispielfall
																											um
																											50
																											%.
															 
				
		 EuroPat v2
			
																						Early-strength
																											and/or
																											high-strength
																											concretes
																											are
																											also
																											referred
																											to
																											as
																											high-performance
																											concretes
																											that
																											either
																											set
																											or
																											cure
																											quickly
																											(quick-setting
																											concretes)
																											or
																											exhibit
																											relatively
																											high
																											strengths
																											and
																											are
																											particularly
																											resistant
																											toward
																											aggressive
																											media
																											(high-strength
																											concrete).
																		
			
				
																						Frühfeste
																											und/oder
																											hochfeste
																											Betone
																											bezeichnet
																											man
																											auch
																											als
																											Hochleistungsbetone,
																											die
																											schnell
																											erstarren
																											und
																											erhärten
																											(schnelle
																											Betone)
																											oder
																											höhere
																											Festigkeiten
																											erbringen
																											und
																											besonders
																											beständig
																											gegen
																											aggressive
																											Medien
																											sind
																											(hochfeste
																											Betone).
															 
				
		 EuroPat v2
			
																						For
																											the
																											production
																											of
																											double-wall
																											elements
																											there
																											may
																											be
																											suitably
																											used
																											normal-strength
																											concrete
																											having
																											a
																											cylinder
																											strength
																											of
																											20
																											MPa
																											to
																											50
																											MPa,
																											high-strength
																											concrete
																											having
																											a
																											cylinder
																											strength
																											of
																											50
																											MPa
																											to
																											100
																											MPa
																											as
																											well
																											as
																											ultrahigh-strength
																											concrete
																											having
																											a
																											cylinder
																											strength
																											of
																											100
																											MPa
																											to
																											200
																											MPa.
																		
			
				
																						Zur
																											Herstellung
																											der
																											Doppelwandelemente
																											kann
																											wahlweise
																											normalfester
																											Beton
																											mit
																											einer
																											Zylinderdruckfestigkeit
																											von
																											20MPa
																											bis
																											50MPa,
																											hochfester
																											Beton
																											mit
																											einer
																											Zylinderdruckfestigkeit
																											von
																											50MPa
																											bis
																											100
																											MPa
																											sowie
																											ultrahochfester
																											Beton
																											mit
																											Zylinderdruckfestigkeiten
																											von
																											100MPa
																											bis
																											200MPa
																											verwendet
																											werden.
															 
				
		 EuroPat v2
			
																						However,
																											for
																											the
																											load-bearing
																											capacity
																											of
																											the
																											grouted
																											connection
																											between
																											the
																											receiving
																											structure
																											and
																											foundation
																											structure,
																											it
																											is
																											crucial
																											that,
																											during
																											the
																											curing
																											of
																											the
																											curable
																											filling
																											compound
																											(the
																											grout),
																											which
																											is
																											usually
																											high-strength
																											concrete,
																											there
																											occurs
																											no
																											or
																											only
																											a
																											slight
																											relative
																											movement
																											between
																											the
																											receiving
																											structure
																											and,
																											for
																											example,
																											the
																											support
																											post
																											inserted
																											into
																											the
																											receiving
																											structure.
																		
			
				
																						Für
																											die
																											Tragfähigkeit
																											der
																											Groutverbindung
																											zwischen
																											Aufnahmestruktur
																											und
																											Gründungsstruktur
																											ist
																											es
																											jedoch
																											entscheidend,
																											dass
																											während
																											der
																											Aushärtung
																											der
																											aushärtbaren
																											Füllmasse
																											(des
																											Grouts),
																											bei
																											der
																											es
																											sich
																											zumeist
																											um
																											hochfesten
																											Beton
																											handelt,
																											keine
																											oder
																											nur
																											geringe
																											Relativbewegung
																											zwischen
																											der
																											Aufnahmestruktur
																											und
																											z.B.
																											dem
																											in
																											die
																											Aufnahmestruktur
																											eingesetzten
																											Tragpfosten
																											stattfindet.
															 
				
		 EuroPat v2
			
																						It
																											is
																											advantageously
																											the
																											case
																											that
																											segments
																											adjacent
																											to
																											one
																											another
																											in
																											a
																											circumferential
																											direction
																											have
																											a
																											spacing
																											to
																											one
																											another
																											and
																											are
																											connected
																											to
																											one
																											another
																											by
																											way
																											of
																											a
																											material
																											of
																											a
																											lower
																											strength
																											than
																											the
																											high-strength
																											concrete
																											of
																											the
																											strengthening
																											element.
																		
			
				
																						Vorteilhaft
																											besitzen
																											in
																											Umfangsrichtung
																											benachbarte
																											Segmente
																											einen
																											Abstand
																											zueinander
																											und
																											sind
																											über
																											ein
																											Material,
																											dessen
																											Festigkeit
																											geringer
																											als
																											die
																											des
																											hochfesten
																											Betons
																											des
																											Verstärkungselementes
																											ist,
																											miteinander
																											verbunden.
															 
				
		 EuroPat v2