Translation of "Process overhead" in German
																						If
																											this
																											process
																											is
																											performed,
																											"overhead",
																											then
																											as
																											an
																											additional
																											safety
																											element
																											the
																											weight
																											of
																											the
																											needles
																											can
																											be
																											used
																											for
																											decoupling
																											from
																											the
																											substrate.
																		
			
				
																						Wird
																											dieser
																											Vorgang
																											"über
																											Kopf"
																											ausgeführt,
																											so
																											kann
																											als
																											zusätzliches
																											Sicherheitselement
																											das
																											Eigengewicht
																											der
																											Nadeln
																											zur
																											Entkopplung
																											vom
																											Substrat
																											eingesetzt
																											werden.
															 
				
		 EuroPat v2
			
																						Point
																											A
																											(corresponds
																											to
																											the
																											point
																											in
																											time
																											of
																											FIG.
																											2)
																											of
																											the
																											curve
																											marks
																											the
																											beginning
																											of
																											the
																											braking
																											process
																											of
																											the
																											overhead
																											belts
																											24
																											of
																											the
																											holding
																											system
																											22
																											of
																											the
																											overhead
																											transport
																											device
																											18,
																											where
																											the
																											braking
																											process
																											is
																											cut
																											off
																											at
																											Point
																											B
																											and
																											the
																											corresponding
																											metal
																											plate
																											12
																											comes
																											to
																											a
																											stop
																											in
																											the
																											stacking
																											mode
																											position
																											(V=zero).
																		
			
				
																						Punkt
																											A
																											(entspricht
																											Zeitpunkt
																											der
																											Figur
																											2)
																											der
																											Kurve
																											bezeichnet
																											den
																											Beginn
																											des
																											Abbremsvorgangs
																											der
																											Überkopfriemen
																											24
																											des
																											Haltesystems
																											22
																											der
																											Überkopftransporteinrichtung
																											18,
																											wobei
																											der
																											Bremsvorgang
																											in
																											Punkt
																											B
																											abgeschlossen
																											ist,
																											und
																											die
																											entsprechende
																											Blechtafel
																											12
																											in
																											der
																											Stapelbetriebsstellung
																											zum
																											Stillstand
																											kommt
																											(V
																											=
																											null).
															 
				
		 EuroPat v2
			
																						The
																											MDO
																											is
																											a
																											low-boiler,
																											which
																											cannot
																											be
																											held
																											back
																											in
																											the
																											process
																											column,
																											i.e.,
																											leaves
																											the
																											process
																											column
																											overhead.
																		
			
				
																						Beim
																											MDO
																											handelt
																											es
																											sich
																											um
																											einen
																											Leichtsieder,
																											der
																											in
																											der
																											Prozesskolonne
																											nicht
																											zurückgehalten
																											werden
																											kann,
																											d.h.
																											über
																											Kopf
																											die
																											Prozesskolonne
																											verlässt.
															 
				
		 EuroPat v2
			
																						International
																											patent
																											application
																											WO
																											96/35654
																											discloses
																											a
																											method
																											in
																											which
																											the
																											process
																											wastewater
																											from
																											the
																											PET
																											production
																											process
																											after
																											the
																											process
																											column
																											(overhead
																											product)
																											is
																											partially
																											condensed
																											and
																											subsequently
																											subjected
																											to
																											an
																											inert
																											gas
																											stripping
																											of
																											a
																											reverse
																											osmosis.
																		
			
				
																						Aus
																											der
																											internationalen
																											Patentanmeldung
																											WO
																											96/35654
																											ist
																											ein
																											Verfahren
																											bekannt,
																											bei
																											dem
																											das
																											Prozessabwasser
																											aus
																											dem
																											PET-Herstellungsprozess
																											nach
																											der
																											Prozesskolonne
																											(Kopfprodukt)
																											teilweise
																											kondensiert
																											und
																											im
																											Anschluss
																											an
																											eine
																											Inertgasstrippung
																											einer
																											Umkehrosmose
																											unterworfen
																											wird.
															 
				
		 EuroPat v2
			
																						There
																											most
																											of
																											the
																											ethylene
																											glycol
																											present
																											is
																											separated,
																											remaining
																											in
																											the
																											sump,
																											and
																											which
																											may
																											then
																											be
																											either
																											recovered
																											or
																											returned
																											to
																											the
																											PET
																											process,
																											and
																											the
																											overhead
																											product
																											of
																											the
																											column
																											is
																											subsequently
																											fed
																											to
																											a
																											condenser,
																											wherein
																											a
																											part
																											of
																											the
																											acetaldehyde
																											and
																											other
																											low-boilers
																											remain
																											in
																											the
																											gas
																											phase
																											and
																											are
																											fed
																											as
																											exhaust
																											air
																											to
																											a
																											thermal
																											or
																											catalytic
																											combustion.
																		
			
				
																						Dort
																											wird
																											ein
																											Großteil
																											des
																											vorhandenen
																											Ethylenglykols
																											abgetrennt,
																											und
																											das
																											Kopfprodukt
																											der
																											Kolonne
																											wird
																											anschließend
																											einem
																											Kondensator
																											zugeführt,
																											wobei
																											ein
																											Teil
																											des
																											Acetaldehyds
																											und
																											anderer
																											Leichtsieder
																											in
																											der
																											Gasphase
																											verbleiben
																											und
																											als
																											Abluft
																											einer
																											thermischen
																											oder
																											katalytischen
																											Verbrennung
																											zugeleitet
																											werden.
															 
				
		 EuroPat v2
			
																						Point
																											D
																											marks
																											the
																											beginning
																											of
																											the
																											acceleration
																											process
																											of
																											the
																											overhead
																											belts
																											24
																											of
																											the
																											holding
																											system
																											22
																											of
																											the
																											overhead
																											transport
																											device
																											18
																											from
																											V=zero
																											to
																											V=3.5
																											m/s
																											(in
																											the
																											present
																											example
																											maximum,
																											constant
																											transport
																											velocity)
																											at
																											Point
																											F.
																											Furthermore,
																											the
																											period
																											of
																											time
																											between
																											Point
																											C
																											and
																											Point
																											F
																											in
																											the
																											present
																											example
																											is
																											41
																											ms.
																		
			
				
																						Der
																											Punkt
																											D
																											bezeichnet
																											den
																											Beginn
																											des
																											Beschleunigungsvorgangs
																											der
																											Überkopfriemen
																											24
																											des
																											Haltesystems
																											22
																											der
																											Überkopftransporteinrichtung
																											18
																											von
																											V
																											=
																											null
																											bis
																											auf
																											V
																											=
																											3,5
																											m/s
																											(im
																											vorliegenden
																											Beispiel
																											maximale,
																											konstante
																											Transportgeschwindigkeit)
																											im
																											Punkt
																											F.
																											Dabei
																											beträgt
																											die
																											Zeitspanne
																											zwischen
																											den
																											Punkt
																											C
																											und
																											dem
																											Punkt
																											F
																											im
																											vorliegendem
																											Beispiel
																											41
																											ms.
															 
				
		 EuroPat v2
			
																						All
																											the
																											online
																											threats
																											go
																											to
																											the
																											Bitdefender
																											Cloud
																											for
																											detection
																											without
																											adding
																											significant
																											processing
																											overhead
																											or
																											memory
																											requirements.
																		
			
				
																						Alle
																											Online-Bedrohungen
																											werden
																											ohne
																											zusätzlichen
																											Verarbeitungsaufwand
																											oder
																											Speicheranforderungen
																											in
																											der
																											Bitdefender
																											Cloud
																											erkannt.
															 
				
		 ParaCrawl v7.1
			
																						An
																											object
																											of
																											the
																											invention
																											is
																											therefore
																											to
																											cost-effectively
																											reduce
																											the
																											processing
																											overhead
																											for
																											image
																											data.
																		
			
				
																						Aufgabe
																											der
																											Erfindung
																											ist
																											es
																											daher,
																											den
																											Verarbeitungsaufwand
																											von
																											Bilddaten
																											kostengünstig
																											zu
																											reduzieren.
															 
				
		 EuroPat v2
			
																						In
																											so
																											doing
																											the
																											acceleration
																											and
																											braking
																											movement
																											processes
																											of
																											the
																											overhead
																											belts
																											24
																											can
																											be
																											initiated
																											by
																											a
																											servomotor
																											in
																											order
																											to
																											achieve
																											high
																											dynamic
																											response.
																		
			
				
																						Dabei
																											können
																											die
																											Beschleunigung-
																											und
																											Bremsbewegungsabläufe
																											der
																											Überkopfriemen
																											24
																											servomotorisch
																											eingeleitet
																											werden,
																											um
																											hohe
																											Dynamik
																											zu
																											erzielen.
															 
				
		 EuroPat v2
			
																						The
																											advantage
																											of
																											the
																											module
																											compared
																											to
																											direct
																											host
																											decoding
																											of
																											the
																											receiver
																											output
																											is
																											the
																											presence
																											of
																											exact
																											decoded
																											time
																											information
																											all
																											of
																											the
																											time
																											and
																											no
																											processing
																											overhead.
																		
			
				
																						Der
																											Vorteil
																											des
																											Moduls
																											gegenüber
																											direkten
																											Host
																											Decodierung
																											der
																											Empfängerausgang
																											ist
																											das
																											Vorhandensein
																											von
																											decodierten
																											genaue
																											Zeitinformationen
																											ganze
																											Zeit
																											und
																											ohne
																											Verarbeitungsaufwand.
															 
				
		 ParaCrawl v7.1
			
																						The
																											workpiece
																											clamping
																											device
																											is
																											preferably
																											held
																											at
																											the
																											axis
																											slide
																											assembly
																											and
																											is
																											preferably
																											configured
																											to
																											clamp
																											the
																											workpiece
																											or
																											a
																											workpiece
																											pallet
																											holding
																											the
																											workpiece
																											in
																											a
																											suspended
																											or
																											laterally
																											suspended
																											fashion,
																											in
																											particular
																											for
																											the
																											overhead
																											processing
																											of
																											the
																											workpiece
																											clamped
																											in
																											suspended
																											fashion
																											or
																											clamped
																											in
																											overhead
																											fashion
																											on
																											the
																											workpiece
																											clamping
																											device.
																		
			
				
																						Vorzugsweise
																											wird
																											die
																											Werkstückspanneinrichtung
																											an
																											der
																											Achsschlitten-Baugruppe
																											gehalten
																											und
																											ist
																											vorzugsweise
																											dazu
																											eingerichtet,
																											das
																											Werkstück
																											bzw.
																											eine
																											das
																											Werkstück
																											haltende
																											Werkstückpalette
																											hängend
																											oder
																											seitlich
																											hängend
																											einzuspannen,
																											insbesondere
																											zur
																											Überkopfbearbeitung
																											des
																											an
																											der
																											Werkstückspanneinrichtung
																											hängend
																											eingespannten
																											bzw.
																											überkopfeingespannten
																											Werkstücks.
															 
				
		 EuroPat v2
			
																						Furthermore,
																											the
																											machine
																											tool
																											100
																											is
																											made,
																											by
																											way
																											of
																											example,
																											in
																											such
																											a
																											way
																											that
																											the
																											workpiece
																											can
																											be
																											clamped
																											in
																											overhead
																											fashion
																											and
																											renders
																											possible
																											an
																											overhead
																											processing
																											of
																											the
																											workpiece
																											where
																											chips
																											optimally
																											fall
																											downwards
																											and
																											can
																											easily
																											be
																											caught
																											or
																											collected
																											in
																											a
																											chip
																											collecting
																											pan.
																		
			
				
																						Beispielhaft
																											ist
																											die
																											Werkzeugmaschine
																											100
																											weiterhin
																											derart
																											ausgebildet,
																											dass
																											das
																											Werkstück
																											über
																											Kopf
																											eingespannt
																											werden
																											kann
																											und
																											eine
																											Überkopfbearbeitung
																											des
																											Werkstücks
																											ermöglicht
																											ist,
																											bei
																											der
																											ein
																											optimaler
																											Spänefall
																											nach
																											unten
																											erfolgt
																											und
																											auf
																											einfache
																											Weise
																											in
																											einer
																											Späneauffangwanne
																											aufgefangen
																											bzw.
																											gesammelt
																											werden
																											kann.
															 
				
		 EuroPat v2