Translation of "Hochsetzen" in English

Based on your existing fanbase, you can set a realistic target.

In particular, this term also covers step-up or step-down of the driver voltage U T .

This can boost the varying DC voltage from the solar generator to an approximately constant intermediate-circuit voltage.

In order to boost the DC voltage from the photovoltaic generator 10, the switching element 14 is periodically switched on and off.

In boosting for the positive polarity of the output wave, the switch 7 remains switched on during a boost operation mode.

The software driving the Data Scope must set both DTR and RTS high.

And we have heard their plans this week: how they are going to cut public services and to increase pension ages, and how they will help the wealthy by cutting inheritance tax.

As regards Amendment No 13, we are not in favour of this mixed Type 1 and Type 2 committee structure. The only effect of this attempt to renationalize Community policies would be to increase the proportion of the costs that is spent on administration.

Well, lift the engine, raise the suspension, cut up the body, customize the axles, and maximize the airflow.

If it is determined that the gear clutch 7 of the new gear II is engaged, another process step 26 is triggered for raising the engine torque Mengine which concludes the shifting operation I?II.

When use is authorized, use-enabling radio call information, which always increments the “credit” in the mobility account back to the “maximum credit” is regularly received by the radio receiver.

Very high restarting peaks, which also step up the root-mean-square value of the operating voltage, were present in the case of a test of the principle using CB operation.

When use is authorized, use-enabling radio call information, which always increments the “credit” in the mobility account back to the “maximum credit” is regularly received by the radio receiver.

Further, it is preferred that the central unit comprises a time measuring device which is connected to the comparator and which initiates the comparison after the lapse of a predetermined time period which started with the increase of the data transmission rate.

This high-setting of the content of fixedmemory 80, in dependence upon the operating frequency of oscillator 70, canbe automatically achieved by passing the output signal of adjustable resistance 72 to a analog-to-digital (A/D) converter 86, whose output signal is then used for addressing fixed memory 80. In fixed memory 80 arestored various signals which specify different divisor ratios of the frequency divider formed by circuits 76 through 80.

In this case, the DC source has a first DC source and a second DC source, and the boost converter is provided as a common boost converter for boosting both the DC voltage provided by the first DC source and the DC voltage provided by the second DC source.

In practice, this means that high interference reflections from wind power plants increase the detection threshold value and thus could completely prevent the detection of a real flying target (with lower reflections).

Please note that some operators raise the number automatically if necessary.

Using an “ additive ” approach to sparse directories, you might check out the directory with an empty depth, then explicitly telescope (using svn update --set-depth infinity) each and every subdirectory of the directory except the one you don't care about.

Using an "additive " approach to sparse directories, you might check out the directory with an empty depth, then explicitly telescope (using svn update --set-depth infinity) each and every subdirectory of the directory except the one you don't care about it.

By contrast, as will be discussed in closer detail herein after, the second intermediate circuit 9 serves on the one side to supply the bridge section 10 with the necessary electrical voltages which are positive or negative with respect to ground potential and on the other side e.g., to boost the output voltage of the first intermediate circuit 8 to the value desired for grid or load feeding by setting its output voltage by selecting the ratio at which the two switches S 1, S 2 are switched on simultaneously.