Translation of "Materialversagen" in English

Based on the arrangement of the present invention, distinctly increased alternating load numbers can be achieved without material failure.

Many of the atomic mechanisms of materials failure however still remain a mystery.

The simulation shows that these parameters have a great influence on the material failure.

If the ink contains pigments the failure of the material is even more likely.

Especially in the case of forks material failure can have serious consequences.

Using new material combinations the developers are working on reducing damage caused by material failure.

Too often these accidents are due to material failure or assembly errors.

Don't use magnets in places where people could sustain injuries in case of material failure.

Particularly in forming operations, these act as notches and thus lead to premature material failure.

The more brittle the material, the more likely a material failure is to occur at low temperatures.

We measure and test damaged bicycles, analyse material failure and assess the amount of loss and the replacement value.

Fraunhofer IWM has developed a model that can accurately predict material failure.

The proportion of patients with hardware failure (locking screws bent or broken) was significantly lower in the InductOs 1.5 mg/ml group as compared to standard-care group (11% versus 22%; P= 0.0174).

Accidental stress or damage caused during the loading or unloading could lead to catastrophic structural failures with unacceptable loss of 1ives.

Accidental stress or damage caused during the loading or unloading could lead to catastrophic structural failures with unacceptable loss of 1ives.

Charging can lead to an arc discharge which can impair the function of the satellite due to magnetic disturbances and material failure.

After the film had been heated for 15 minutes at 160° C., a uniformly flexible sheet which could be bent without material failure was obtained.

Nonuniform mechanical properties of the molds produced from such workpieces may result from this, causing weak points that become evident primarily through premature material failure.

By the design of the applicator head 38 and the clip holder 27, the radius of the hinge structure 48 is relatively large and its plastic deformation will lead to material failures only after an unrealistically large number of operations.

Such material failure can then lead to a direct contact between hydrogen and oxygen, which will involve failure of a cell.

If the friction or contact, respectively, changes due to defects such as impurities, mechanical damage, loose parts, varying production tolerances, material failure, etc., this in turn causes a change in the acoustic response.

The material is deemed brittle if splintering, i.e. brittle failure occurred on more than one of the 10 sheets.

As the plastics material core layer, in contrast to DE 1 527 957, also generally has a significantly greater thickness than the cover layers, the cover layers are disproportionately susceptible with respect to loading exerted during forming, and therefore a material failure, for example ruptures, cracks or the like can occur on the cover layers.

This effect is not only, but primarily unacceptable in implantology, as material failure has catastrophic consequences, because implants should remain in the body fault-free for decades and optimally for a lifetime.

An object of the invention is to provide a hinge for an airbag flap that offers high protection from material failure and, moreover, provides damping in the hinge mechanism.

Learn how material fatigue and even material failure can be predicted with artificial aging, and how you can save time and money - and increase customer satisfaction - using accelerated aging tests.

After a phase of uniform removal of the protective layer on a blade, crater-like material failure – generally aided by minor production damage – can form at one location, which then quickly spreads.