Translation of "Um grosse" in English

Look, I'll give you six months to create a new piece for me, large-scale.

Essentially three major groups:

Chain 152 is tightly stretched to facilitate rapid acceleration.

Often, large quantities of program code and data are at issue.

The forces here involved however, are not great.

Click on image to enlarge photo.

This can be utilised, in order to form large contact surfaces of the helical transmission.

The perfect solution to manage large amounts of data within a company.

We were going to watch great white sharks from a cage.

In order to achieve a high hooping capacity with such a band hooping machine, working takes place at maximum band speeds.

In order to accommodate the greatest possible tolerances, the sealing structure cross-section must be relatively large.

The compartments are located, for example, one above the other in an imbricated manner in cross section, in order to achieve the greatest possible conveying capacity.

A further amplifier 68 is provided at the output to be able to generate sufficiently large output signal power.

Are you a developer? Use our API to send large files!

You can click each thumbnail to see a full size version of the image.

The development, being actually an urban quarter, is designed to have two major commercial activity centers:

Interdependent people combine their own efforts with the efforts of others to achieve their greatest success.

The company founded "aravis" («Aravis Energy I LP») to realise large plants in Southern Europe.

While security filaments having flat, rectangular cross-sections are preferably used where the filament is to be bonded to a document, in order to obtain as large a bonding surface as possible, security filaments which are welded into films may have any possible cross-sections.

As highly elastic fabrics are preferably used, it is important that coating and laminating are effected in the same units in a single operation, in order, for example, to avoid high mechanical stresses on the webs (when changing units).

Especially in respect of the construction of the expanders it is to be noted that it is readily possible to construct the expanders differently from one another in order to obtain different clamping forces in the two axially spaced clamping zones.

In order to be able to control this large number of LED's separately, a correspondingly large number of supply lines is required.

Chief amongst these is the large bulk of solvent required to maintain the degree of intimate mixing necessary for fast and complete reaction with the high speed stirring methods typically employed.

In the end someone, somehow, has to decide how much information and of what type is going to be made available ­ hence nolens volens, like in the case of medicine, someone is going to assess the relative merits.

Professor Anderla's talk had shown how many people were willing to rive wholehearted support to the CEC in the completion of this ¡rreat task.

In order to achieve the largest possible pole surfaces between the armature 7 and the yokes 4 and 5, the lateral downwardly depending legs 7b and 7c of the armature 7 respectively extend down over the coil flanges 11a and 11b at the end faces.

It is also found that by manufacturing the cutters of the comb-shaving sections from a flexible metal foil the engagement of said cutters with the associated head members is inadequate to provide an appropriate cutting pressure, which also reduces the cutting action.

To reach a maximum capacitance in the capacitor, it is necessary to make the dielectric layers very thin so that their thickness is preferably 0.1 to 0.5 ?m.