Übersetzung für "Belastungskurve" in Englisch

Furthermore, the loading curve leads to damping of mechanical oscillations.

As a result, the load on the publish instance should remain relatively flat.

Accordingly, the individual sections 68 of load curve 66 provide evidence of a progression acting on the force accumulator.

This impermissible operating state is avoided, using the inventive method, by means of the loading curve (F A2).

With ordinary concrete, when subjected to pressure, once it is cracked the characteristic graph of loading goes up, reaches the break point and drops.

The slope of the impedance curve in the ROI is therefore determined, and the difference between the slope of a resting or reference curve and the slope of the currently measured impedance curve (exertion curve) is calculated.

In this region it determines a relationship between a resting or reference curve and an exertion curve, especially by way of an arithmetic processing of the time integral of the impedance over the aforementioned range.

The shoe itself is concave; the width can be between 110 and 340 mm, depending on the module size, the loading curve and the product requirements.

Since the wood weight varies considerably with environmental factors, time of year, and the number of branch unions, it’s necessary to know the weights of the picks in relation to the load chart and strength of rigging components.

Furthermore, a structural condition and a retention action of the mounting mat can be determined using a hysteresis curve between a load curve and relief curve.

The large hysteresis of the load curve 178 and the relief curve 182 of the viscoelastic material occurring with the load and with the relief reflects the slow return to the original shape brought about by the at least one damping device 126 .

Here it is evident that sections 68 become larger in the direction of arrow 69 on load curve 66 .

The mechanism 1 according to the invention, also referred to as a non-orbiting gear system, thus follows a progression of load curve 66 that demonstrates progressive action on the force accumulator.

This greater compression of force accumulator unit 2 is accompanied by increasing progression throughout the load curve 66 acting on force accumulator, so that this position (linkage element in position D) is suitable as a setting for heavy seat users, and the setting of force accumulator unit 2 according to FIG.

Thus, the change in the tilt angle of force accumulator unit 2 is not changed by adjuster 11 via the spindle 51 associated with gear system 32, and a progression of the force accumulator, particularly the helical spring, is achieved due to the fact that the non-orbiting gear system, that is to say the mechanism 1 according to the invention, acts progressively on the force accumulator of force accumulator unit 2 with its load curve 66 .

It is finally also possible for partial pressing steps to be configured as continuously forming partial pressing steps, wherein in this case the pressing step is carried out along a load curve which is predefined previously, irrespective of the reaction of the primary product which is under pressure.

Here, the load curve is again designated with A and the relief curve with B; although here a clearly reduced hysteresis behavior can be seen.

At point in time t 4 the amount of this temperature difference is at its maximum so that a minimum 6 is formed in the stress curve 2 .

An estimated value for the additional fatigue can be assigned to this based on previous experience, if necessary using data stored in a database, which the part has experienced after passing through the entire stress cycle represented by the stress curve 2 .

In the event of a production-induced variation in the machine configuration, the current operating point is displaced along a curve (loading curve), both the speed actual value and the drive torque being changed.

Since the abovedescribed loading curve is part of the speed controller, the behavior exhibits extremely high dynamics.

A conventional position-controlled or speed-controlled pretensioning unit is operated with a lag (p 1), from which its loading curve (F A1) is obtained.

For a movement analysis you walk barefoot over a recessed printing plate which measures the pressure data of the foot in Newton per square cm each hundredth second, as well as the body gravity course of the foot in the load curve.

It shows the current load curve of the individual channels and suggests theleast used one as the optimal channel.

If a machine performs the same operation on bolt after bolt, then its load curve should appear identical every time the machine carries out the operation.