Übersetzung für "Blockhöhe" in Englisch

The two corner wafers are taken from silicon blocks of the same block height.

The stacks of four cards are repeated until the desired block height is reached.

When batch trimming and using the same height of blocks, Memory Position will help to accelerate the sectioning.

For this reason, small installations (i.e., those which are to operate with a low throughput) become uneconomical because a relatively long foaming zone and hardening zone must be provided for a desired block height, due to the low speed. This necessarily implies a high mechanical expense and a considerable requirement of space.

The present invention relates to a process and a device for the production of foam slabs of angular cross-section in a flock composite, foam flocks being introduced into a molding box with adjoining mold walls and the filling then being compacted to the desired density or slab height by means of a stamp and the finished slab subsequently being removed from the mold.

This object is achieved in that before the foam flocks are introduced, the cross-section in every corner formed by two mold walls are extended to a filling cross-section, and after the foam flocks have been introduced, the filling cross-section is reduced to the desired shape of the cross-section of the slab to be produced, and only then, is the filling compacted to the desired density or slab height.

The filling 16 in the molding box 1 is to be compacted to a slab height of 0.5 m at a density of 60 kg/m 3 .

The foam obtained in this case is markedly heterogeneous and shows severe flow disturbances at the bottom and sides, reaching up to about 60% of the height of the block.

It follows that with increasing ingot height, the point in time at which gap formation is initiated occurs later.

It is also possible that the lateral sheet sections B L and B R are so wide respectively so high that they by themselves already serve as lateral separation substrate for the whole height of the bloc.

But it is also possible that the above mentioned lateral sheet sections are so wide respectively high that the same serve already as lateral separation sheet for the whole height of the bloc.

FIG. 3 shows the apparatus 10 with parts of the rounding device 50 and a book block 1, in this case having a small block height as seen in the longitudinal horizontal direction V (FIG. 4) that extends parallel to the axes of rotation 57 ?, 58 ? of the rounding rolls 57, 58 .

The limited steepness of the rise profile means, however, that the block height and the belt speed must be in a specific ratio.

To produce rebonded foam, polyurethane flexible foam shredded to flake size is mixed with a binder, for example a polyurethane prepolymer, introduced into a box mould and compressed to the desired density or block height.

FIG. 5 shows the box mould after the plunger 10 has been introduced into the box mould 3 in the vertical direction and has compressed the bed to the desired block height or the desired density to obtain a foam block.

The distance has been chosen so that after the blocking height (FIG. 12C) has been reached during the lowering of the vehicle chassis, it is the bumper pad 18 that strikes against the mounting plate 7 and not the collar 10 ? with the pneumatic spring bellows material folded over it in order to spare it.

FIG. 13A shows the fully extended state of the pneumatic spring bellows 5, whereas FIG. 13B shows the fully folded pneumatic spring bellows 5, whereby the bumper pad 18 strikes against the mounting plate 7 according to the desired blocking height before the two collars 10 ?, 10 ? reach this point.

Standard dimensions: 2,040 x 1,040 mm and 2,280 x 1,550 mm, block height depending on foam type.

This allows layers of any size and thickness to be cut to perfection over the entire block height - without lifting the block.

This customized thin-cutting line can cut large-format timber blocks with a maximum block height of up to 520 mm and a minimum lamella thickness of 2.5 mm.

The result? The machine excels at both wet and dry cutting, with a cutting width of up to 350 mm and a maximum block height of 165 mm.

Both collars 10 ?, 10 ? are braced below on the base plate 23 of the plunger piston 6 . Because of the double folding of the pneumatic spring bellows 5 achieved in this case, the ratio of maximum bellows travel (FIG. 13A) to blocking height (FIG. 13B) is even more favorable.