Übersetzung für "Defekte bauteile" in Englisch

This means that you effectively avoid short circuits and the resulting faulty components.

During subsequent assembly, defective or worn components are replaced.

Thus, any defective parts can be identified quickly in the event of disorders.

Defective components in running machines can cause considerable damage and downtime.

Worn or defective components can be directly identified and ordered via the manroland Goss MARKET-X online store.

A specific procedure must be chosen for drilling into plastic parts, in order to eliminate component defects as far as possible.

So it would be possible, if spare parts provided, to swap defective components, should it ever be necessary.

Polyamides for electrical and electronic components should have a CTI value of at least 550 V in order to prevent the short circuiting and component defects caused by tracking.

Electrical – Paper mills, like other plants, can experience unexpected downtime due to electrical component failure such as electrical bus bars, line splices, switch disconnects, transformers, circuit breakers and distribution panels.

Its installation is very simple. Vice-versa, the elevation drive element 20, the control rails 30, the thrust element 82 and the guide rails 90 always can be quickly and conveniently removed from the clamping plate 12 for instance to replace defective components, to change the shutoff needles 16 or to carry out other maintenance work.

BACKGROUND In vehicles used for the commercial transport of passengers, where the cabin outfit is to be considered a strong competitive characteristic, it is absolutely essential to detect defective components in the passenger cabin and to precisely collect defect data in a central location in order to make it possible to affect repair as soon as possible to rectify the defect.

Nowadays, diagnostic and monitoring systems are being increasingly used in rail vehicle traffic, the diagnostic and monitoring systems detecting changes in state of components and assemblies of the rail vehicle in order to detect defects in these components and assemblies.

In addition, there is the risk that, in the implementation of a system with safety-related components, the motor protective switches and the safety relays will be connected incorrectly to the safety-related components, or defective components will be used, so that the system, the electric drive, and/or operating personnel can be endangered due to incorrect operation.

With this step, it is ensured that the components of the blank can already pass through a functional test via the external contacts, so that defective components already on the blank can be marked.

Our spare part service will be pleased to support you in the replacement of defective or wear parts, with the result that your system will work again perfectly.

In the case of a method in which it envisaged only to divide the devices in each device position and subsequently apply external contacts to external contact areas, the advantage is obtained that external contacts are to be applied only to the semiconductor devices which have previously not been marked as defective devices during the functional test of the panel.

By the same token, the lift elements 20, 120, the guide rails 30, 130, the thrust element 82 and the guide rails 90 can be removed quickly and comfortably from the bolster plate 12 at any time, e.g. to replace defective construction elements, replace the shut-off needles 16, 116 or carry out other maintenance tasks.

Since safety switching devices such as these are used in safety-critical environments, the dangers which can be caused by defective components must be coped with.

Polyamides for electrical and electronic components should have a CTI value of at least 550 V in order to prevent the short circuiting and component defects caused by tracking.

State-of-the-art measuring instruments, tools and test systems help us to identify and replace defective components.

This contract also stipulates that an extensive range of replacement parts needs to be held permanently in reserve to be able to replace faulty components as quickly as possible if they become damaged.

During the remanufacturing process a product will be collected, inspected, disassembled and then reconditioned and replacement parts added as necessary.

Defective components that could soon lead to a system shutdown are identified independently of the usual maintenance schedule, and can be replaced before damage actually occurs.

In many cases, it becomes necessary to replace worn or defective elements of playground equipment over the course of time.

The guarantee covers the replacement of all defective parts.

Replace the defective component as required.

The punctual renewal of defective components reduces maintenance costs.

Furthermore, additional diagnostic functions for the early detection of defective components are possible.

Targeted replacement of defective components can save workshops and drivers lots of time and money. Â

As an electrical measurement method, the probe 1 which, by way of example, has two coils 4, 7 or only one coil as well as the ferromagnetic signal amplification 22, can be used for eddy current measurement which serves, for example, to detect defects in or on metallic components 10 .

This facilitates not only maintenance of the database 14 because it is not necessary to acquire all the three-dimensional positions of all the smaller components in the passenger cabin, but also the maintenance tasks, because maintenance personnel can see at a glance where the defective component is located within the cabin.