Übersetzung für "Drehzahlverhalten" in Englisch
																						Problematisch
																											ist
																											ferner,
																											dass
																											sichergestellt
																											werden
																											muss,
																											dass
																											die
																											Brennkraftmaschine
																											in
																											ihrem
																											Drehzahlverhalten
																											stets
																											sicher
																											abgefangen
																											werden
																											muss,
																											also
																											nicht
																											ausgehen
																											darf,
																											und
																											zwar
																											auch
																											dann
																											nicht,
																											wenn
																											sich
																											der
																											Zustand
																											der
																											Schubabschneidung
																											beispielsweise
																											bei
																											kalter
																											Brennkraftmaschine
																											ergibt.
																		
			
				
																						Another
																											problem
																											is
																											that
																											the
																											engine
																											speed
																											behavior
																											always
																											has
																											to
																											be
																											monitored
																											closely,
																											that
																											is,
																											the
																											engine
																											is
																											not
																											permitted
																											to
																											stall,
																											not
																											even
																											if
																											the
																											supply
																											of
																											fuel
																											is
																											interrupted
																											during
																											overrunning
																											while
																											the
																											engine
																											is
																											still
																											cold.
															 
				
		 EuroPat v2
			
																						Bei
																											den
																											in
																											der
																											DE
																											36
																											23
																											627
																											A1
																											und
																											der
																											DE
																											32
																											30
																											607
																											A1
																											beschriebenen
																											Verfahren
																											wird
																											das
																											Drehzahlverhalten
																											im
																											Antriebsstrang
																											eines
																											Verbrennungsmotors
																											auf
																											das
																											Auftreten
																											von
																											Drehungleichförmigkeiten
																											hin
																											überwacht.
																		
			
				
																						Other
																											documents,
																											DE
																											36
																											23
																											627
																											A1
																											and
																											DE
																											32
																											30
																											607
																											A1,
																											describe
																											methods
																											for
																											monitoring
																											the
																											turning-rate
																											behavior
																											in
																											the
																											drive-line
																											of
																											an
																											internal-combustion
																											engine
																											to
																											detect
																											rotation
																											irregularities.
															 
				
		 EuroPat v2
			
																						Die
																											Antriebs-
																											und
																											die
																											Bremswirkung
																											sind
																											unabhängig
																											voneinander
																											einstellbar
																											und
																											an
																											die
																											Bedürfnisse,
																											bspw.
																											an
																											das
																											gewünschte
																											Drehzahlverhalten
																											oder
																											die
																											Größe
																											der
																											Düse
																											anzupassen.
																		
			
				
																						The
																											drive
																											effect
																											and
																											the
																											braking
																											effect
																											are
																											adjustable
																											independently
																											from
																											one
																											another,
																											and
																											can
																											be
																											adapted
																											to
																											the
																											desired
																											parameters,
																											for
																											example
																											to
																											the
																											desired
																											rate
																											of
																											rotation
																											relation
																											or
																											to
																											the
																											size
																											of
																											the
																											nozzle.
															 
				
		 EuroPat v2
			
																						Durch
																											entsprechende
																											Ausbildung
																											der
																											Gehäuseinnenwand
																											und
																											der
																											Düsenabmessungen
																											kann
																											ein
																											geeignetes
																											Drehzahlverhalten
																											der
																											Düse
																											für
																											den
																											interessierenden
																											Arbeitsdruckbereich
																											und
																											die
																											Anwendung
																											sichergestellt
																											werden.
																		
			
				
																						By
																											a
																											corresponding
																											construction
																											of
																											the
																											housing
																											inner
																											wall
																											and
																											selection
																											of
																											the
																											appropriate
																											nozzle
																											dimensions,
																											a
																											rate-of-rotation
																											of
																											the
																											nozzle
																											suitable
																											for
																											the
																											working
																											range
																											of
																											interest
																											and
																											the
																											desired
																											application
																											can
																											be
																											ensured.
															 
				
		 EuroPat v2
			
																						Hierdurch
																											kann
																											in
																											Abstimmung
																											auf
																											das
																											Ansetzen
																											des
																											Fadens
																											und
																											das
																											Abziehen
																											des
																											Ansetzers
																											der
																											Spinnrotor
																											sein
																											gewünschtes
																											Drehzahlverhalten
																											aufweisen.
																		
			
				
																						Thereby,
																											in
																											coordination
																											with
																											the
																											piecing
																											of
																											the
																											yarn
																											and
																											the
																											drawing
																											off
																											of
																											the
																											piecing
																											joint,
																											the
																											spinning
																											rotor
																											can
																											be
																											ensured
																											the
																											desired
																											the
																											rotational
																											speed.
															 
				
		 EuroPat v2
			
																						Durch
																											diese
																											räumliche
																											Nähe
																											der
																											beiden
																											Ringbereiche
																											27,
																											29
																											in
																											einem
																											überdies
																											von
																											dem
																											Gehäuse
																											19
																											umschlossenen
																											Bereich
																											ergibt
																											sich
																											das
																											im
																											Einleitungsteil
																											erläuterte
																											ruhige
																											und
																											stabile
																											Lauf-
																											und
																											Drehzahlverhalten
																											dieses
																											erfindungsgemäßen
																											Fluidrotationsantriebs.
																		
			
				
																						The
																											smooth
																											and
																											stable
																											running
																											behavior
																											and
																											rotational
																											speed
																											behavior
																											of
																											this
																											fluid
																											rotation
																											drive
																											in
																											accordance
																											with
																											the
																											invention
																											explained
																											in
																											the
																											description
																											part
																											results
																											from
																											this
																											spatial
																											proximity
																											of
																											the
																											two
																											ring
																											regions
																											27,
																											29
																											in
																											a
																											region
																											moreover
																											surrounded
																											by
																											the
																											housing
																											19
																											.
															 
				
		 EuroPat v2
			
																						Tritt
																											z.B.
																											ein
																											Schlupf
																											in
																											der
																											Transmission
																											auf,
																											so
																											hat
																											das
																											Auswirkungen
																											auf
																											die
																											Geschwindigkeit
																											der
																											Lieferwalze,
																											aber
																											in
																											Rückkopplung
																											auch
																											auf
																											das
																											Drehzahlverhalten
																											des
																											Rotors.
																		
			
				
																						If
																											slip
																											occurs
																											in
																											the
																											transmission,
																											for
																											example,
																											this
																											has
																											an
																											effect
																											on
																											the
																											speed
																											of
																											the
																											delivery
																											roller,
																											but
																											in
																											feedback
																											also
																											on
																											the
																											rotor
																											speed.
															 
				
		 EuroPat v2
			
																						Auch
																											dadurch,
																											daß
																											die
																											den
																											Stützbund
																											26
																											tragenden
																											Gehäuselager
																											28
																											sehr
																											groß,
																											vorzugsweise
																											größer
																											als
																											das
																											Gelenk
																											19
																											selbst,
																											vorgesehen
																											sind
																											und
																											daher
																											auch
																											der
																											Stützbund
																											26
																											einen
																											großen
																											Durchmesser
																											hat,
																											ergibt
																											sich
																											neben
																											viel
																											Platz
																											für
																											die
																											schwenkende
																											Verbindungswelle
																											20
																											auch
																											eine
																											besonders
																											hoch
																											beanspruchbare
																											Treibradlagerung
																											für
																											hohen
																											Leistungsdurchgang
																											und
																											lange
																											Lebensdauer
																											selbst
																											bei
																											unruhigem
																											Drehzahlverhalten.
																		
			
				
																						Also,
																											due
																											to
																											the
																											fact
																											thatthe
																											bearing
																											housings
																											28
																											which
																											carry
																											the
																											support
																											collar
																											26
																											are
																											made
																											very
																											large,
																											preferrably
																											larger
																											tha
																											articulation
																											19
																											itself,
																											and
																											that
																											therefore
																											the
																											support
																											collar
																											26
																											has
																											a
																											large
																											diameter,
																											'
																											in
																											addition
																											to
																											ample
																											space
																											for
																											the
																											swinging
																											connecting
																											shaft
																											20
																											there
																											results
																											an
																											especially
																											highly
																											stressable
																											bearing
																											(array)
																											for
																											the
																											drive
																											wheel
																											for
																											high
																											power
																											throughput
																											and
																											long
																											life
																											even
																											in
																											the
																											presence
																											of
																											fluctuations
																											of
																											the
																											rotation.
															 
				
		 EuroPat v2
			
																						Ferner
																											wird
																											das
																											Drehzahlverhalten
																											beim
																											Hochlauf
																											des
																											Starters,
																											insbesondere
																											durch
																											die
																											Verschiebung
																											der
																											Leerlaufdrehzahl,
																											positiv
																											beeinflusst.
																		
			
				
																						Furthermore,
																											the
																											behavior
																											of
																											the
																											rotational
																											speed
																											is
																											positively
																											influenced
																											particularly
																											by
																											the
																											shift
																											in
																											the
																											idle
																											rotational
																											speed
																											during
																											start-up
																											of
																											the
																											starter.
															 
				
		 EuroPat v2
			
																						Während
																											durch
																											die
																											Reduzierung
																											der
																											im
																											Reihenschluss
																											betriebenen
																											Teilwicklungen
																											insbesondere
																											das
																											Drehmoment
																											des
																											Motors
																											beim
																											Anlaufen
																											des
																											Motors
																											reduziert
																											wird,
																											ist
																											es
																											durch
																											die
																											Verschaltung
																											einzelner
																											Teilwicklungen
																											im
																											Nebenschluss
																											zum
																											Anker
																											möglich,
																											die
																											Drehzahlkennlinie
																											zu
																											begradigen
																											und
																											das
																											Drehzahlverhalten
																											des
																											Starters
																											weniger
																											abhängig
																											vom
																											Belastungsstrom
																											zu
																											machen,
																											insbesondere
																											zur
																											Reduzierung
																											der
																											Leerlaufdrehzahl.
																		
			
				
																						Whereas
																											especially
																											the
																											torque
																											of
																											the
																											engine
																											is
																											reduced
																											during
																											start-up
																											by
																											the
																											reduction
																											of
																											the
																											partial
																											windings,
																											which
																											are
																											operated
																											in
																											a
																											series
																											connection,
																											it
																											is
																											possible
																											by
																											connecting
																											individual
																											partial
																											windings
																											in
																											shunt
																											with
																											the
																											armature
																											to
																											straighten
																											the
																											characteristic
																											curve
																											of
																											the
																											rotational
																											speed
																											and
																											to
																											make
																											the
																											rotational
																											speed
																											behavior
																											of
																											the
																											starter
																											less
																											dependent
																											on
																											the
																											load
																											current.
															 
				
		 EuroPat v2
			
																						Das
																											Dosiersystem
																											hat
																											zu
																											seinem
																											Antrieb
																											einen
																											mehrphasigen
																											kollektorlosen
																											Außenläufermotor
																											32,
																											dessen
																											Drehzahlverhalten
																											mittels
																											eines
																											PWM-Steuersignals
																											gesteuert
																											werden
																											kann,
																											wie
																											das
																											z.B.
																											aus
																											der
																											EP
																											1
																											413
																											045
																											B1
																											bekannt
																											ist.
																		
			
				
																						To
																											drive
																											it,
																											the
																											metering
																											system
																											has
																											a
																											multi-phase
																											collectorless
																											external-rotor
																											motor
																											32
																											whose
																											rotation
																											speed
																											behavior
																											can
																											be
																											controlled
																											by
																											means
																											of
																											a
																											PWM
																											control
																											signal,
																											as
																											is
																											known
																											e.g.
																											from
																											EP
																											1
																											413
																											045
																											B1
																											and
																											corresponding
																											U.S.
																											Pat.
																											No.
																											7,068,191,
																											KUNER
																											&
																											SCHONDELMAIER.
															 
				
		 EuroPat v2
			
																						Ein
																											solcher
																											Elektromotor
																											ist
																											sehr
																											variabel,
																											da
																											durch
																											das
																											gespeicherte
																											Kennlinienfeld
																											sein
																											Drehzahlverhalten
																											als
																											Funktion
																											der
																											variablen
																											physikalischen
																											Größe
																											leicht
																											veränderbar
																											ist,
																											indem
																											man
																											einen
																											oder
																											mehrere
																											der
																											gespeicherten
																											digitalen
																											Einzelwerte
																											verändert.
																		
			
				
																						An
																											electric
																											motor
																											of
																											this
																											kind
																											is
																											very
																											versatile,
																											since
																											because
																											of
																											the
																											stored
																											characteristic
																											field
																											its
																											rotation
																											speed
																											behavior
																											as
																											a
																											function
																											of
																											the
																											changeable
																											physical
																											variable
																											can
																											easily
																											be
																											modified.
															 
				
		 EuroPat v2
			
																						Andere
																											nicht
																											plausible
																											Zustandsgrößen
																											der
																											Reibungskupplung,
																											beispielsweise
																											ein
																											bei
																											einem
																											vorgegebenen
																											Kupplungsweg
																											nicht
																											erwarteter
																											Schlupf,
																											ein
																											zu
																											hohes
																											über
																											die
																											Reibungskupplung
																											übertragenes
																											Moment
																											oder
																											ein
																											unerwartetes
																											Drehzahlverhalten
																											der
																											Brennkraftmaschine
																											können
																											alternativ
																											oder
																											zusätzlich
																											als
																											Indikator
																											für
																											einen
																											Verlust
																											der
																											Kalibration
																											zum
																											Start
																											des
																											Verfahrens
																											herangezogen
																											werden.
																		
			
				
																						Other
																											implausible
																											status
																											variables
																											of
																											the
																											friction
																											clutch,
																											for
																											example
																											an
																											unexpected
																											slip
																											on
																											a
																											prescribed
																											clutch
																											travel
																											path,
																											excessive
																											torque
																											transmitted
																											through
																											the
																											friction
																											clutch
																											or
																											unexpected
																											rotational
																											speed
																											behavior
																											of
																											the
																											combustion
																											engine,
																											can
																											be
																											adduced
																											alternatively
																											or
																											additionally
																											as
																											indicators
																											of
																											a
																											loss
																											of
																											the
																											calibration
																											to
																											start
																											the
																											procedure.
															 
				
		 EuroPat v2
			
																						Reluktanzmotoren
																											sind
																											Elektromotoren,
																											die
																											einen
																											wicklungsfreien,
																											Rotorzähne
																											aufweisenden
																											Rotor
																											enthalten
																											und
																											deren
																											Drehzahlverhalten
																											im
																											synchronen
																											Betrieb
																											direkt
																											proportional
																											der
																											Frequenz
																											der
																											zugeführten
																											Spannung
																											ist.
																		
			
				
																						Reluctance
																											motors
																											are
																											electric
																											motors
																											which
																											comprise
																											a
																											coil-free
																											rotor
																											with
																											rotor
																											teeth
																											and
																											whose
																											speed
																											behavior
																											during
																											the
																											synchronous
																											operation
																											is
																											directly
																											proportional
																											to
																											the
																											frequency
																											of
																											the
																											supplied
																											voltage.
															 
				
		 EuroPat v2
			
																						Die
																											elektrisch
																											betreibbaren
																											Handstücke
																											möchte
																											der
																											Zahnarzt
																											ebenfalls
																											mit
																											der
																											pneumatischen
																											Fußsteuerung
																											betätigen,
																											so
																											dass
																											dafür
																											Sorge
																											zu
																											tragen
																											ist,
																											dass
																											das
																											Drehzahlverhalten
																											der
																											elektrisch
																											betreibbaren
																											Handstücke
																											dem
																											der
																											pneumatisch
																											betreibbaren
																											Handstücke
																											entspricht,
																											so
																											dass
																											der
																											Arzt
																											idealerweise
																											mittels
																											seines
																											gewohnten
																											Bedienverhaltens
																											der
																											Fußsteuerung
																											beider
																											Handstücke,
																											ungeachtet,
																											ob
																											es
																											sich
																											um
																											ein
																											pneumatisch
																											betreibbares
																											Handstück
																											oder
																											ein
																											elektrisch
																											betreibbares
																											Handstück
																											handelt,
																											bedienen
																											kann.
																		
			
				
																						The
																											dentist
																											would
																											like
																											to
																											operate
																											the
																											electrically
																											operable
																											handpieces
																											likewise
																											with
																											the
																											pneumatic
																											foot-operated
																											control,
																											so
																											that
																											it
																											must
																											be
																											ensured
																											that
																											the
																											rotational
																											speed
																											behavior
																											of
																											the
																											electrically
																											operable
																											handpieces
																											corresponds
																											to
																											the
																											pneumatically
																											operable
																											handpieces,
																											so
																											that
																											the
																											dentist
																											can
																											ideally
																											operate
																											both
																											handpieces
																											by
																											means
																											of
																											his
																											accustomed
																											way
																											of
																											operating
																											the
																											foot-operated
																											control,
																											irrespective
																											of
																											whether
																											a
																											pneumatically
																											operable
																											handpiece
																											or
																											an
																											electrically
																											operable
																											handpiece
																											is
																											concerned.
															 
				
		 EuroPat v2
			
																						Statt
																											die
																											Außentemperatur
																											über
																											den
																											Temperatursensor
																											50
																											zu
																											erfassen
																											kann
																											auch
																											die
																											Getriebeöltemperatur
																											durch
																											einen
																											Sensor
																											52
																											erfasst
																											werden
																											oder
																											es
																											kann
																											eine
																											Getriebeöltemperatur
																											aus
																											dem
																											Drehzahlverhalten
																											der
																											Getriebewelle
																											abgeschätzt
																											werden.
																		
			
				
																						Instead
																											of
																											acquiring
																											the
																											outside
																											temperature
																											via
																											temperature
																											sensor
																											50,
																											the
																											gear
																											oil
																											temperature
																											can
																											also
																											be
																											acquired
																											by
																											a
																											sensor
																											52
																											or
																											the
																											gear
																											oil
																											temperature
																											can
																											be
																											estimated
																											from
																											the
																											rpm
																											behavior
																											of
																											the
																											gear
																											shaft.
															 
				
		 EuroPat v2
			
																						Der
																											Erfindung
																											liegt
																											daher
																											die
																											Aufgabe
																											zugrunde,
																											ein
																											Verfahren
																											zur
																											Synchronisation
																											zweier
																											sich
																											drehender
																											Teile
																											anzugeben,
																											durch
																											das
																											bei
																											beliebigem
																											Drehzahlverhalten
																											der
																											drehenden
																											Teile
																											nach
																											einem
																											möglichst
																											kurzen
																											Zeitraum
																											eine
																											Synchronisation
																											dieser
																											Teile
																											herbeigeführt
																											wird,
																											ohne
																											daß
																											hierbei
																											Teile
																											des
																											Kraftfahrzeuges
																											beschädigt
																											werden.
																		
			
				
																						It
																											is
																											therefore
																											an
																											object
																											of
																											the
																											present
																											invention
																											to
																											provide
																											a
																											method
																											and
																											apparatus
																											for
																											the
																											synchronization
																											of
																											two
																											rotating
																											parts,
																											which
																											can
																											be
																											achieved
																											in
																											as
																											short
																											a
																											time
																											as
																											possible,
																											regardless
																											of
																											the
																											speed
																											behavior
																											of
																											the
																											rotating
																											parts,
																											and
																											without
																											incurring
																											any
																											damage
																											to
																											the
																											parts
																											of
																											the
																											motor
																											vehicle.
															 
				
		 EuroPat v2
			
																						Die
																											optional
																											erhältlichen,
																											halbautomatischen
																											Einstellschrauber
																											wurden
																											von
																											Dürr
																											gemäß
																											Drehmoment-
																											und
																											Drehzahlverhalten
																											speziell
																											für
																											die
																											Scheinwerfer-
																											und
																											Sensoreinstellung
																											entwickelt.
																		
			
				
																						The
																											semi-automatic
																											screwdrivers
																											which
																											are
																											available
																											as
																											an
																											option
																											have
																											been
																											developed
																											by
																											Dürr
																											according
																											to
																											torque
																											and
																											speed
																											characteristics
																											especially
																											for
																											headlamp
																											and
																											sensor
																											adjustment.
															 
				
		 ParaCrawl v7.1
			
																						Das
																											Drehzahlverhalten
																											des
																											Universalmotors
																											ist
																											stark
																											lastabhängig,
																											es
																											gibt
																											Anwendungsgebiete,
																											wo
																											die
																											besten
																											Arbeitsergebnisse
																											durch
																											konstante
																											Drehzahl
																											erreicht
																											werden.
																		
			
				
																						The
																											speed
																											of
																											a
																											universal
																											motor
																											depends
																											primarily
																											on
																											the
																											applied
																											load.
																											In
																											many
																											applications
																											the
																											best
																											results
																											are
																											achieved
																											by
																											maintaining
																											a
																											constant
																											rotational
																											speed.
															 
				
		 ParaCrawl v7.1