Übersetzung für "Entsorgungsverfahren" in Englisch

With all of these disposal techniques, toxic components can be neutralized by means of the appropriate chemicals.

Waste disposal method and apparatus are described in more detail in the specific embodiments.

Disposal techniques such as direct final storage are being studied.

The POPs Regualtion lays down the disposal processes for wastes containing PCB.

Only a small volume of other materials is sent for disposal.

Thus, compiler has an extended disposal procedure.

The Directive requires Member States to give the highest priority to the regeneration of waste oils in preference to other disposal methods.

The filler which is incorporated in the polyurethane has in many respects an advantageous influence on the improved process.

So far there were four disposal procedures: recycling, composting, depositing or burning.

The disposal procedure is only used for reclaimed Eternit that is sealed in approved big bags and pallets.

Since such obligations of course do not apply to copyers, where there are components (such as bumpers) the composition of which is unknown, there is a risk of jeopardising the end-of-life processing cycle, with possible repercussions for the environment and further cost increases.

Since such obligations of course do not apply to copyers, where there are components (such as bumpers) the composition of which is unknown, there is a risk of jeopardising the end-of-life processing cycle, with possible repercussions for the environment and further cost increases.

Place effective disposal procedures and clearly marked and technically safe containers for the handling of disposable sharps and injection equipment as close as possible to the assessed areas where sharps are being used or to be found;

In Annex III, Section 7, the distinction between "disposal" and "recovery" of waste is not sufficiently clear in the table specifying the waste, incineration, composting and disposal operations.

Specify the appropriate methods of disposal of both the substance or preparation and any contaminated packaging (incineration, recycling, landfilling, etc.)

In this overall assessment Member States must pay particular attention to put in place appropriate waste management practices to handle the waste solution remaining after application, including the cleaning water of the drenching system.

Waste has to be classified before disposal and the method of management tailored to its particular characteristics.

The objective is both to maintain the safety standards referred to in point 4.3 and to ensure ongoing scientific and technological development of nuclear installations, their safety concepts and disposal procedures, in order to guarantee optimum protection of public health and to minimise risk.

For example, we consider that setting up mandatory disposal consortia according to the model already laid down by the legislation of some Member States could be a practical response to the need to limit the economic impact of disposal operations on breeders and, at the same time, thanks to the increase in the degree of social control over the proper use of the service, to the need to consolidate consumer and environmental guarantees.

There is still a need for an economical process for the disposal of organic water-insoluble products which contain elements in addition to C, H and O.

With the process according to the invention, a breakdown of the DNA to fragments smaller than/equal to 500 bp can be achieved which is also not exceeded by the waste disposal processes (autoclaving) permitted by the ZKBS.

However, the aforementioned disposal technique of separating the soot from the liquor and landfilling the sooty filter cake is expensive.