Übersetzung für "Folienhersteller" in Englisch

This is also the case for sheet manufacturers.

The new Advanced Borseal grades, fine-tuned to the needs of film producers, include:

Shortly after a ramp-up time, the film manufacturer achieved outstanding coating results.

The manufacturer of the foil guarantees correct function during the entire lifetime of the product.

The foil manufacturer extends thereby his capacity in the foil pressure by 20 per cent.

Eleven film producers are already actively involved in the initiative.

Sheetpackaging is booming – thereforesheet producers increasingly demand high-performance equipment to produce premium-qualitysheet with low energy consumption.

As the only film manufacturer in the world, RENOLIT has over 10,000 active articles just in the area of self-adhesive films.

The T.T.I.-group has developed, together with the manufacturer, the revolutionary 4D-Vinyl, a new vinyl film with unique properties.

We will gladly work together with the foil manufacturer to perform the necessary initial testing for you.

The sheet producers, that represent only a small proportion of the converters sector, sell to many different types of industries that use sheets mainly to package their goods.

The sheet producers, that represent only a small proportion of the converters sector, sell to many different types of industries that use sheets mainly to package their goods.

Also important to the film manufacturer is the reclaimability of scrap film produced during the film making process.

However, the application of a second protecting layer of clear lacquer has the disadvantages that an additional operation is necessary to produce the finish films or continuous edges, and that the film manufacturer must pay the price of holding a much greater and therefore more expensive stock of lacquer in comparison with the single-layer process.

Film manufacturers have now started to produce films from polypropylene (pp) which are environmentally more acceptable and can in the end be burned to produce water vapour and carbon dioxide without forming any acids or harmful gases.

These are impregnated plain-colored or printed paper foils which are provided with a varnish coat by the foil manufacturer.

Moreover, for applicability of the process in practice, it is necessary that the equipment already available to the foil manufacturer can be used for carrying out the process and that the finish foils and endless edges obtained meet the abovementioned requirements.

While some of these and other polyester film primer layers are effective in enhancing the adhesive qualities of PET film, it is important for the film manufacturer that scrap film made during production must be recyclable through the film-forming process.

If the mean particle size is too large, however, the surface quality of the resulting coating no longer satisfies the stringent demands of the foil manufacturers.

The development of a primer material which would render PET film surfaces receptive to both aqueous and organic solvent coatings or printings applied directly to the primed film surface would be of great significance to the film manufacturer.

Thus the primed film of this invention offers a distinct commercial advantage to the film manufacturer over many other primed films, such as films primed with vinylidene chloride containing polymers as disclosed in U.S. Pat. Nos. 2,627,088 and 2,698,240, which tend to degrade and discolor when reclaimed as set forth above.

In the years past, capacitor producers and film producers have therefore concentrated on polymers with higher melting points, such as PEN and PPS.

The support material can in particular be supplied as an endless or continuous material in reel form to the form manufacturer by a specialized film manufacturer or finisher.

In place of the planned material weakening at certain points, these can also be provided in the form of lines or points, this being carried out by the foil manufacturer prior to blister processing.

The permanent miniaturization of the electronic components goes hand in hand with an inevitable reduction in the film thicknesses, which forces the manufacturers of the film virtually to the limit of what is technically possible.

This additional operation becomes redundant with the use of finish sheeting which is already varnished by the sheeting manufacturer following impregnation.

Since the stretched film of VDC/VC copolymer was able to fulfil the requirements of "strength", "oxygen barrier", "water vapour barrier" and "meat adherence" with only one polymer, the manufacturers of the films were prepared to pay a relatively high price for the VDC/VC copolymer as raw material.

Film manufacturers have also intentionally modified the film surface to improve the winding characteristics of the film.

This is an impregnated self-colored or printed paper sheeting which may be provided with a coating of paint already by the sheeting manufacturer as a follow-up to impregnation.