Übersetzung für "Grenzbedingungen" in Englisch
																						Bei
																											der
																											Auslegung
																											derartiger
																											Gaskühler
																											sind
																											verschiedene
																											Grenzbedingungen
																											zu
																											beachten.
																		
			
				
																						Various
																											limiting
																											conditions
																											must
																											be
																											taken
																											into
																											consideration
																											in
																											the
																											design
																											of
																											such
																											gas
																											coolers.
															 
				
		 EuroPat v2
			
																						Dies
																											ist
																											wahrscheinlich
																											dadurch
																											zu
																											erklären,
																											dass
																											die
																											Grenzbedingungen
																											berücksichtigt
																											werden.
																		
			
				
																						This
																											possibly
																											can
																											be
																											explained
																											by
																											taking
																											into
																											account
																											the
																											boundary
																											conditions.
															 
				
		 EUbookshop v2
			
																						Auch
																											die
																											Formulierung
																											von
																											Grenzbedingungen
																											kann
																											schwierig
																											werden.
																		
			
				
																						The
																											formulation
																											of
																											boundary
																											conditions
																											may
																											also
																											raise
																											problems.
															 
				
		 EUbookshop v2
			
																						Von
																											den
																											beiden
																											Grenzbedingungen
																											wird
																											diejenige
																											wirksam,
																											die
																											bei
																											niedrigerer
																											H-Feldstärke
																											eintritt.
																		
			
				
																						Of
																											the
																											two
																											limit
																											conditions,
																											the
																											one
																											which
																											occurs
																											at
																											the
																											lower
																											H
																											field
																											strength
																											becomes
																											effective.
															 
				
		 EuroPat v2
			
																						Die
																											Nanopartikel-Bereiche
																											können
																											mit
																											den
																											geometrisch-anatomischen
																											Regionen
																											und
																											den
																											Regionen
																											mit
																											z.B.
																											thermischen
																											Grenzbedingungen
																											überlappen.
																		
			
				
																						The
																											nanoparticle
																											areas
																											can
																											overlap
																											the
																											geometric-anatomical
																											regions
																											and
																											the
																											regions
																											with,
																											for
																											example,
																											thermal
																											limit
																											conditions.
															 
				
		 EuroPat v2
			
																						Ergänzend
																											ist
																											es
																											auch
																											möglich,
																											bei
																											der
																											Bestimmung
																											der
																											Grenzbedingungen
																											Eigenschaften
																											des
																											Fahrers
																											zu
																											berücksichtigen.
																		
			
				
																						In
																											addition,
																											it
																											is
																											also
																											possible
																											to
																											consider
																											characteristics
																											of
																											the
																											driver
																											when
																											setting
																											the
																											limit
																											conditions.
															 
				
		 EuroPat v2
			
																						Die
																											Grenzbedingungen
																											einer
																											gattungsgemäßen
																											Kronenradverzahnung
																											werden
																											im
																											wesentlichen
																											durch
																											die
																											Ausgestaltung
																											der
																											Verzahnung
																											des
																											Kronenrads
																											bestimmt.
																		
			
				
																						The
																											limit
																											conditions
																											of
																											a
																											crown-gear
																											toothing
																											of
																											the
																											class
																											in
																											question
																											are
																											determined
																											substantially
																											by
																											the
																											configuration
																											of
																											the
																											crown-gear
																											toothing.
															 
				
		 EuroPat v2
			
																						Schmierung
																											unter
																											Grenzbedingungen
																											entsteht
																											durch
																											die
																											metallurgischen
																											und
																											chemischen
																											Eigenschaften
																											der
																											Oberflächen
																											bei
																											Kontakt.
																		
			
				
																						Lubrication
																											under
																											boundary
																											conditions
																											is
																											afforded
																											by
																											the
																											metallurgical
																											and
																											chemical
																											nature
																											of
																											the
																											manufactured
																											surfaces
																											in
																											contact.
															 
				
		 ParaCrawl v7.1
			
																						Zu
																											diesem
																											Zweck
																											muss
																											der
																											Hersteller
																											die
																											verschiedenen
																											vernünftigerweise
																											vorhersehbaren
																											Grenzbedingungen
																											und
																											die
																											zulässigen
																											Grenzwerte
																											und
																											Betriebsbedingungen,
																											die
																											im
																											Betrieb
																											auftreten
																											können,
																											für
																											das
																											Teilsystem
																											„Fahrzeuge“
																											in
																											einem
																											Dokument
																											auflisten
																											und
																											beschreiben.
																		
			
				
																						For
																											this
																											purpose,
																											the
																											manufacturer
																											shall
																											describe
																											and
																											list
																											in
																											a
																											document
																											the
																											various
																											reasonably
																											foreseeable
																											degraded
																											modes
																											and
																											the
																											related
																											acceptable
																											limits
																											and
																											operating
																											conditions
																											of
																											the
																											rolling
																											stock
																											subsystem
																											that
																											can
																											be
																											experienced.
															 
				
		 DGT v2019
			
																						Daher
																											ist
																											es
																											zulässig,
																											dass
																											in
																											den
																											betrieblichen
																											Unterlagen
																											(wie
																											in
																											Abschnitt
																											4.2.12.4
																											festgelegt)
																											der
																											Einsatz
																											von
																											Kohle
																											mit
																											Zusatzstoffen
																											auf
																											Wechselstromstrecken
																											unter
																											Grenzbedingungen
																											erlaubt
																											ist
																											(d.
																											h.
																											im
																											Falle
																											des
																											Ausfalls
																											des
																											Kontrollkreises
																											einer
																											der
																											Stromabnehmer,
																											oder
																											sonstiger
																											Ausfälle,
																											die
																											sich
																											auf
																											die
																											fahrzeugseitige
																											Energieversorgung
																											auswirken),
																											um
																											eine
																											Fahrt
																											fortzusetzen.
																		
			
				
																						Note:
																											This
																											open
																											point
																											is
																											not
																											safety
																											related,
																											and
																											it
																											is
																											therefore
																											acceptable
																											that
																											the
																											operating
																											documentation
																											(as
																											specified
																											in
																											clause
																											4.2.12.4)
																											allow
																											the
																											use
																											of
																											carbon
																											with
																											additive
																											material
																											on
																											AC
																											lines
																											in
																											degraded
																											conditions
																											(i.e.
																											in
																											case
																											of
																											failure
																											of
																											the
																											control
																											circuit
																											of
																											one
																											of
																											the
																											pantographs,
																											or
																											other
																											failure
																											affecting
																											the
																											onboard
																											power
																											supply)
																											in
																											order
																											to
																											continue
																											a
																											journey.
															 
				
		 DGT v2019
			
																						Für
																											die
																											sicherheits-/interoperabilitätsrelevanten
																											Komponenten
																											oder
																											Bauteile
																											muss
																											dieses
																											Dokument
																											die
																											messbaren
																											Grenzwerte
																											angeben,
																											die
																											im
																											Betrieb
																											(einschließlich
																											Betrieb
																											unter
																											bestimmten
																											Grenzbedingungen)
																											nicht
																											überschritten
																											werden
																											dürfen.
																		
			
				
																						For
																											the
																											safety/interoperability
																											relevant
																											components
																											or
																											parts,
																											this
																											document
																											shall
																											give
																											the
																											measurable
																											limits
																											not
																											to
																											be
																											exceeded
																											in
																											service
																											(to
																											include
																											operation
																											in
																											degraded
																											mode).
															 
				
		 DGT v2019
			
																						Die
																											Aus
																											legung
																											des
																											Kreislaufs
																											Super-Sara
																											und
																											die
																											Konzeption
																											der
																											Prüfstrecke
																											wurden
																											an
																											gepaßt,
																											um
																											den
																											Bedingungen
																											zu
																											entsprechen,
																											die
																											infolge
																											der
																											Untersuchungen
																											schwerer
																											Brennstoffschäden
																											unter
																											sehr
																											unterschiedlichen
																											Grenzbedingungen
																											erfor
																											derlich
																											sind.
																		
			
				
																						The
																											designs
																											of
																											the
																											Super-Sara
																											loop
																											and
																											of
																											the
																											test
																											section
																											were
																											adapted
																											to
																											provide
																											the
																											conditions
																											required
																											for
																											the
																											study
																											of
																											serious
																											fuel
																											damage
																											under
																											extremely
																											variable
																											boundary
																											conditions.
															 
				
		 EUbookshop v2
			
																						Wenn
																											diese
																											beiden
																											Grenzbedingungen
																											eingehalten
																											sind,
																											ist
																											einerseits
																											gewährleistet,
																											daß
																											die
																											Auflagefläche
																											in
																											Kontakt
																											mit
																											der
																											Kontaktfläche
																											steht
																											und
																											dadurch
																											der
																											zugeordnete
																											Steg
																											seine
																											Stützfunktion
																											erfüllen
																											kann
																											und
																											daß
																											andererseits
																											die
																											Haut
																											im
																											Bereich
																											der
																											Kontaktfläche
																											nicht
																											übermäßig
																											verformt
																											wird.
																		
			
				
																						If
																											these
																											two
																											limiting
																											conditions
																											are
																											observed,
																											it
																											will
																											guarantee
																											that
																											both
																											the
																											reposing
																											surface
																											will
																											be
																											in
																											contact
																											with
																											the
																											contact
																											surface
																											and
																											thus
																											that
																											the
																											assigned
																											nosepad
																											can
																											fulfill
																											its
																											support
																											function,
																											and
																											that
																											the
																											skin
																											in
																											the
																											region
																											of
																											the
																											contact
																											surface
																											will
																											not
																											be
																											excessively
																											distorted.
															 
				
		 EuroPat v2
			
																						Eine
																											andere
																											besonders
																											einfache
																											Möglichkeit
																											für
																											eine
																											Regelstrategie,
																											bei
																											der
																											die
																											Grenzbedingungen
																											der
																											Volltondichten
																											berücksichtigt
																											werden,
																											kann
																											so
																											realisiert
																											werden,
																											daß
																											in
																											einer
																											in
																											Fig.
																											4
																											nicht
																											gezeichneten
																											Weise
																											der
																											Ausgang
																											des
																											zweiten
																											Schichtdickensteuerungsrechners
																											55'
																											einen
																											weiteren
																											Eingang
																											des
																											Regelstrategieblocks
																											63
																											speist,
																											um
																											zu
																											vermeiden,
																											daß
																											am
																											Ausgang
																											des
																											Regelstrategieblocks
																											63
																											Farbmaßzahldifferenzen
																											auftreten,
																											die
																											nach
																											Umrechnung
																											im
																											dritten
																											Schichtdickensteuerungsrechner
																											55''
																											zu
																											einer
																											Übersteuerung
																											der
																											Farbführungsorgane
																											über
																											die
																											Schichtdickengrenzwerte
																											hinaus
																											führen
																											würden.
																		
			
				
																						Another
																											particularly
																											simple
																											possibility
																											for
																											a
																											regulation
																											strategy,
																											in
																											which
																											the
																											boundary
																											conditions
																											of
																											the
																											full
																											tone
																											densities
																											are
																											taken
																											into
																											consideration,
																											may
																											be
																											realized
																											in
																											a
																											manner
																											not
																											shown
																											in
																											FIG.
																											4.
																											The
																											outlet
																											of
																											the
																											second
																											layer
																											thickness
																											control
																											computer
																											55'
																											may
																											supply
																											another
																											inlet
																											of
																											the
																											regulation
																											strategy
																											block
																											63,
																											in
																											order
																											to
																											prevent
																											the
																											appearance
																											at
																											the
																											outlet
																											of
																											the
																											regulation
																											strategy
																											block
																											63
																											of
																											colorimetric
																											measure
																											differences,
																											which
																											following
																											their
																											conversion
																											in
																											the
																											third
																											layer
																											thickness
																											control
																											computer
																											55"
																											would
																											lead
																											to
																											an
																											overregulation
																											of
																											the
																											ink
																											control
																											elements
																											beyond
																											the
																											layer
																											thickness
																											boundary
																											values.
															 
				
		 EuroPat v2
			
																						Dadurch
																											sollten
																											zwei
																											Grenzbedingungen
																											im
																											Kompromiß
																											optimal
																											erfüllt
																											werden,
																											nämlich,
																											daß
																											die
																											Rauheit
																											einerseits
																											genügend
																											groß
																											ist,
																											um
																											einen
																											gewissen
																											(dort
																											behaupteten)
																											Farb-Abstoßeffekt
																											zu
																											verwirklichen,
																											beispielsweise
																											um
																											ein
																											Schmieren
																											des
																											frisch
																											bedruckten
																											Bogens
																											an
																											seiner
																											Rückseite
																											beim
																											Widerdruck
																											zu
																											verhindern,
																											andererseits
																											die
																											Rauheit
																											aber
																											auch
																											so
																											klein
																											wie
																											möglich
																											sei,
																											um
																											den
																											optimalen
																											Traganteil
																											für
																											die
																											Auflagefläche
																											des
																											Bogens
																											sicherzustellen.
																		
			
				
																						By
																											this
																											means,
																											two
																											marginal
																											conditions
																											in
																											the
																											compromise
																											should
																											be
																											optimally
																											fulfilled,
																											namely,
																											that
																											the
																											roughness
																											on
																											the
																											one
																											hand,
																											is
																											sufficient
																											to
																											bring
																											about
																											an
																											asserted
																											given
																											ink-repellant
																											effect,
																											for
																											example
																											to
																											impede
																											slurring
																											or
																											smearing
																											of
																											the
																											rear
																											side
																											of
																											the
																											freshly-printed
																											sheet
																											during
																											second-side
																											or
																											perfector
																											printing,
																											and,
																											on
																											the
																											other
																											hand,
																											that
																											the
																											roughness
																											is
																											as
																											low
																											as
																											possible,
																											in
																											order
																											to
																											ensure
																											the
																											optimal
																											support
																											or
																											contact
																											surface
																											area
																											for
																											the
																											bearing
																											surface
																											of
																											the
																											sheet.
															 
				
		 EuroPat v2
			
																						Wie
																											am
																											Beispiel
																											der
																											Dichloressigsäure
																											gezeigt,
																											eignen
																											sich
																											auch
																											substituierte
																											Säuren
																											dieser
																											Art,
																											sofern
																											ihr
																											pK
																											S
																											-Wert
																											den
																											angegebenen
																											Grenzbedingungen
																											entspricht.
																		
			
				
																						As
																											shown
																											with
																											reference
																											to
																											the
																											example
																											of
																											dichloroacetic
																											acid,
																											substituted
																											acids
																											of
																											this
																											type
																											are
																											also
																											suitable
																											providing
																											their
																											pKa
																											value
																											is
																											within
																											the
																											stated
																											limits.
															 
				
		 EuroPat v2
			
																						Diese
																											Rinnen
																											haben
																											feste
																											Seitenwände,
																											so
																											daß
																											die
																											Grenzbedingungen
																											für
																											Strömungsberechnungen
																											genau
																											definiert
																											und
																											bekannt
																											sind.
																		
			
				
																						These
																											channels
																											have
																											fixed
																											side
																											walls
																											so
																											that
																											the
																											boundary
																											conditions
																											for
																											flow
																											computations
																											are
																											precisely
																											defined
																											and
																											known.
															 
				
		 EuroPat v2
			
																						Für
																											den
																											Fall
																											einer
																											an
																											ihrer
																											Spitze
																											mit
																											einem
																											Flansch
																											mit
																											ebener
																											Oberfläche
																											versehenen
																											Sonde
																											sind
																											die
																											Grenzbedingungen
																											für
																											die
																											Differentiat-Wellengleichung
																											einfach,
																											so
																											daß
																											eine
																											analytische
																											Lösung
																											relativ
																											einfach
																											zu
																											erhalten
																											ist.
																		
			
				
																						In
																											the
																											case
																											of
																											a
																											flanged
																											tip
																											probe
																											with
																											a
																											planar
																											surface
																											the
																											boundary
																											conditions
																											of
																											the
																											differential
																											wave
																											equation
																											are
																											simple,
																											and
																											so
																											an
																											analytical
																											solution
																											is
																											relatively
																											easy
																											to
																											obtain.
															 
				
		 EuroPat v2
			
																						Der
																											Erfindung
																											liegt
																											die
																											Aufgabe
																											zugrunde,
																											ein
																											Verfahren
																											zu
																											entwickeln,
																											das
																											die
																											Aufrechterhaltung
																											der
																											Produktion
																											der
																											Druckmaschine
																											bei
																											Grenzbedingungen,
																											wie
																											Unterspannung,
																											erhöhten
																											Umgebungs-
																											bzw.
																											Motortemperaturen
																											und
																											erhöhtem
																											Momentenbedarf
																											bei
																											möglichst
																											hoher
																											Druckleisung
																											gewährleistet.
																		
			
				
																						It
																											is
																											an
																											object
																											of
																											the
																											invention
																											to
																											provide
																											a
																											method
																											of
																											maintaining
																											production
																											of
																											a
																											printing
																											machine
																											when
																											border
																											conditions
																											such
																											as
																											inadequate
																											voltage,
																											increased
																											ambient
																											and
																											motor
																											temperatures,
																											respectively,
																											and
																											increased
																											moment
																											demand
																											with
																											the
																											maximum
																											possible
																											printing
																											capacity,
																											exist.
															 
				
		 EuroPat v2
			
																						Für
																											den
																											Fall
																											einer
																											an
																											ihrer
																											Spitze
																											mit
																											einem
																											Flansch
																											mit
																											ebener
																											Oberfläche
																											versehenen
																											Sonde
																											sind
																											die
																											Grenzbedingungen
																											für
																											die
																											Differential-Wellengleichung
																											einfach,
																											so
																											daß
																											eine
																											analytische
																											Lösung
																											relativ
																											einfach
																											zu
																											erhalten
																											ist.
																		
			
				
																						In
																											the
																											case
																											of
																											a
																											flanged
																											tip
																											probe
																											with
																											a
																											planar
																											surface
																											the
																											boundary
																											conditions
																											of
																											the
																											differential
																											wave
																											equation
																											are
																											simple,
																											and
																											so
																											an
																											analytical
																											solution
																											is
																											relatively
																											easy
																											to
																											obtain.
															 
				
		 EuroPat v2
			
																						Das
																											Fahrgestell
																											des
																											Schienenfahrzeugs
																											1
																											und
																											dessen
																											Fahrgeschwindigkeit
																											sind
																											derart
																											auszulegen,
																											daß
																											auch
																											unter
																											Grenzbedingungen
																											das
																											Lichtraumprofil
																											10
																											nicht
																											verletzt
																											wird,
																											so
																											daß
																											beispielsweise
																											beim
																											Durchfahren
																											von
																											Tunnels
																											keine
																											Kollision
																											mit
																											der
																											Tunnelwandung
																											oder
																											mit
																											seitlich
																											des
																											Gleiskörpers
																											außerhalb
																											der
																											besagten
																											Hüllkurve
																											angeordneten
																											Bauteilen
																											vorkommen
																											kann.
																		
			
				
																						The
																											undercarriage
																											of
																											the
																											rail
																											vehicle
																											1
																											and
																											its
																											speed
																											of
																											travel
																											are
																											to
																											be
																											so
																											determined
																											that,
																											even
																											under
																											limit
																											conditions,
																											the
																											clearance
																											gauge
																											10
																											is
																											not
																											trespassed
																											upon,
																											so
																											that,
																											for
																											instance,
																											upon
																											travel
																											through
																											a
																											tunnel
																											there
																											can
																											be
																											no
																											collision
																											with
																											the
																											wall
																											of
																											the
																											tunnel
																											or
																											with
																											structural
																											parts
																											arranged
																											to
																											the
																											side
																											of
																											the
																											track
																											outside
																											the
																											said
																											envelope
																											curve.
															 
				
		 EuroPat v2
			
																						Letzterer
																											werden
																											die
																											in
																											einem
																											Datenspeicher
																											OVEW
																											eingespeicherten
																											Overrideeckwerte
																											sowie
																											die
																											Maschinendaten
																											MD
																											zugeführt,
																											welche
																											die
																											Grenzbedingungen
																											wie
																											maximal
																											zulässige
																											Bahngeschwindigkeit
																											V
																											max
																											und
																											maximal
																											zulässige
																											Bahnbeschleunigung
																											a
																											max
																											enthalten.
																		
			
				
																						The
																											override
																											transition
																											values
																											stored
																											in
																											a
																											data
																											store
																											OVEW,
																											as
																											well
																											as
																											the
																											data
																											stored
																											in
																											machine
																											data
																											store
																											MD,
																											which
																											correspond
																											to
																											the
																											limiting
																											conditions
																											such
																											as
																											maximum
																											admissible
																											track
																											speed
																											vmax
																											and
																											maximum
																											admissible
																											track
																											acceleration
																											amax,
																											are
																											also
																											supplied
																											to
																											preprocessing
																											unit
																											VSA.
															 
				
		 EuroPat v2