Übersetzung für "Luft nach unten" in Englisch

This machine tried to beat the air into submission.

The air is preferably allowed to flow through the adsorption tower from top to bottom.

We continue to believe that there is not much air to drop downward.

The two bullets will move downward when used in midair.

Leap Smash: The Glitter leaps up into the air and smashes downwards.

The air is then deflected downwards, creating a nice rolling effect.

Due to the higher specific density, any air which is eventually present in the chamber will displace downwardly.

At the same time, air is forced through the conduit 9 from top to bottom through the tower 7.

Furthermore the air behind the emitters 35 is transported optimally downwards.

Cold air generated in this way tends to descend and warm air correspondingly tends to swirl upward.

Warm air is pulled down and across the carpet for faster drying times.

No matter how crappy it is, it's still air down.

Thermal inversions occur primarily during the Winter when cool air sinks and gets trapped in the valleys at night, often leading to frost and occasional freezes.

"A wing functions because the air over the wing has a lower pressure than the air under it.

To prevent air leaking through the pallet, the pallet 1 is suitably provided with a bottom plate made of polyurethane for example.

Here again the air is squeezed out downward, but this process is never complete, especially not in the case of thicker fleeces.

Between the mounting of the prober table 1 denoted by 3 and the bottom 2a a suitable seal is arranged which is not shown in the Figure and prevents any escape of the gas or air disposed in the container 2 downwardly.

If the nozzle is e.g. located in the upper region of a wall, e.g. on introducing cold air it can be pivoted into an upper position, whereas, on supplying hot air is can be pivoted into a downwardly directed position.

Between the intermediate walls 20a, 20b, 20c, and 20d, and the outer wall parts 13a, 13b, 13c, and 13d there is formed a square ring or annular channel or duct 21, in which air suctioned by the ventilator 9 flows downwardly in a direction on to the filter 7.

Between the intermediate wall 20a' and the outer wall 13a' there is formed a ring or annular channel or duct 21a, in which the air suctioned by the ventilator 9a flows downwardly in a direction onto the filter 7a.

A process according to claim 1, comprising forcing the air to flow through the adsorption tower from top to bottom.

In the course of this, irrigation is carried out from top to bottom, with periodic simultaneous exposure to an airstream from bottom to top to achieve aerobic degradation.

In this application the acoustic transducer system is mounted above the highest level anticipated and the sound waves travel through the air downwards until they impact the surface of the material where they are reflected to return to the acoustic transducer system as an echo signal.

The porous plate is of such porosity that the air is able to travel upwards from below, but that powder particles cannot pass through the plate.

Said side borders thus form air gaps 7 which have a width of 17 mm and through which the air cooled on the top sides of the air-conditioning panels can flow downwards.

Inside the nozzle boxes 17, 18 there is an overpresssure, so that the air flows out of the nozzle boxes 17, 18 downwards and upwards via nozzles and is thus directed as a jet of air against the material web 10.

In this flow chamber 38 the cleaned air flows downwardly into the undercarriage 1 and is guided by the filter 11 to the air outlet, where the cleaned air is again discharged.

If by operating finger valve 64 an opening of main valve 546 is caused, working piston 19 is driven downwardly through the air flowing above into the working cylinder 55 so that nail 4 contained in drive-out channel 6 is driven out into a workpiece (FIG.

It has been found that the outer air drawn into the perforated gas filled container having an open bottom causes a circulation in the underlying part of the liquid body which in turn causes an upward flow of the liquid from the underlying part into the upper aireated liquid portion.

The sliding rails are straight or meandering in longitudinal direction, whereby the sliding rails can optionally be interrupted at multiple and/or regular distances in transverse direction thereby not hindering the drainage of the humidity or the downwards flow of the air.