Übersetzung für "Messingteile" in Englisch

At last I had to paint the brass parts a rusty color.

Brass parts are combined perfectly with wooden furniture.

Both the scabbard and the dagger have brass parts.

The plastic parts were applied and the brass parts were made.

The brass parts will be changed against plastic parts and the counterlungs better fixed

A protective coating made from nickel and rhodium, for example, prevents brass components from tarnishing and developing patina.

In addition the brass parts receive a 0.2 to 0.3 micron layer of rhodium or 24-carat gold.

The steel and brass components of very fine watches have faceted edges (chamfering).

But my pointing cross base consists of loose brass parts, so I could place it to the side.

The index member and the joint piece are nickel-plated brass parts or can be made of corrosion-free materials resistant to anesthetic.

This permits the four brass parts 15, 16, 17a, 17b to be joined intimately to form a very low-ohmic structure within which the bobbin and the coil are sealed hermetically.

Preferably, this is achieved by fire-tinning the four brass parts used for this purpose and joining them under pressure in a suitable tool, whereby the two annular end disks are pressed into the outer tube while the inner tube is simultaneously pressed into the central opening of the annular end disks. During this pressing operation, a certain slight deformation of the parts may occur which ensures a strong, form and friction-locking connection between all shielding parts.

Unless the coating of a crystal chandelier, lamp of wall light is distorted, no oxidisation or turning black of brass parts used for crystal chandeliers, lamps and wall lights occurs.

During the Second World War, the company was forced to manufacture brass parts for the arms industry to ensure its survival.

When manufacturing brass parts we widely use 3D simulation, which is used both when we develop the new products and when test products for assembling.

Note: The FALLER Special Oiler (170489) is suitable for all steel and brass parts used in model construction, especially for the mechanisms (screws, gears) of the FALLER Car System vehicles (however, not the front axle), for our synchronous motors (180628, 180629, 330090) and naturally, also for your locomotives.

The brass parts of the Large Inline Conversion are considerably larger and heavier than the Standard Small Inline Set the Novise comes with when you first buy it

This ensures that our high requirements are met, e. g. in relation to manufacturing processes (such as solidly forged aluminium and brass parts for increased stability and lifetime) and in relation of machining / post processing precision (which is necessary for the dimensional accuracy and matching of our couplings).

The Catalogue features the whole range of ABERAccessories (PE-Parts, Brass-Parts etc). for Military Vehicles, Cars, Ships, Planes etc. in different scales.

Brass parts used for the crystal lights are further protected against oxidisation by a coating of high quality lacquer baked at 150°C.

Thanks to our existing experience, technology and equipment, we offer to businesses that use in their manufacturing brass parts, their serial production by provided drawings or samples.