Übersetzung für "Mittleren lage" in Englisch
																						Die
																											Laufradeintrittskante
																											2
																											befindet
																											sich
																											in
																											einer
																											mittleren
																											axialen
																											Lage
																											des
																											Konturrings.
																		
			
				
																						The
																											impeller
																											leading
																											edge
																											2
																											is
																											disposed
																											in
																											an
																											intermediate
																											axial
																											position
																											of
																											the
																											contour
																											ring.
															 
				
		 EuroPat v2
			
																						In
																											der
																											zur
																											Kraftrichtung
																											symmetrischen
																											mittleren
																											Lage
																											verbleiben
																											die
																											Werkzeuge,
																											wenn
																											das
																											Roll-Schmiede-Verfahren
																											angewendet
																											wird.
																		
			
				
																						For
																											the
																											forging
																											rolling
																											method,
																											the
																											tools
																											remain
																											in
																											the
																											center
																											position
																											symmetrical
																											to
																											the
																											direction
																											of
																											force.
															 
				
		 EuroPat v2
			
																						Bei
																											dem
																											Magazin-Schacht
																											11a
																											ist
																											eine
																											Fehlzigarette
																											29
																											in
																											der
																											mittleren
																											Lage
																											17
																											identifiziert
																											worden.
																		
			
				
																						A
																											defective
																											cigarette
																											29
																											in
																											the
																											middle
																											layer
																											17
																											has
																											been
																											identified
																											in
																											the
																											magazine
																											shaft
																											11a.
															 
				
		 EuroPat v2
			
																						5A),
																											die
																											elektrisch
																											nicht
																											leitend
																											ist,
																											einer
																											mittleren
																											Lage
																											(Fig.
																		
			
				
																						5A),
																											which
																											is
																											not
																											electrically
																											conductive,
																											a
																											middle
																											layer
																											(FIG.
															 
				
		 EuroPat v2
			
																						In
																											dieser
																											Darstellung
																											befindet
																											sich
																											der
																											Wälzkörper
																											genau
																											in
																											der
																											mittleren
																											Lage
																											des
																											Wälzlagers.
																		
			
				
																						In
																											this
																											illustration,
																											the
																											rolling
																											body
																											is
																											situated
																											precisely
																											in
																											the
																											central
																											position
																											of
																											the
																											rolling
																											bearing.
															 
				
		 EuroPat v2
			
																						Auf
																											diese
																											Weise
																											kann
																											werkstofftechnisch
																											ein
																											hinsichtlich
																											der
																											mittleren
																											Lage
																											asymmetrischer
																											Verbundwerkstoff
																											zur
																											Verfügung
																											gestellt
																											werden.
																		
			
				
																						In
																											this
																											way,
																											in
																											terms
																											of
																											material
																											technology
																											a
																											composite
																											material
																											can
																											be
																											provided
																											which
																											is
																											asymmetric
																											in
																											respect
																											of
																											the
																											middle
																											layer.
															 
				
		 EuroPat v2
			
																						In
																											diesem
																											speziellen
																											Beispiel
																											kann
																											ein
																											werkstofftechnisch
																											hinsichtlich
																											der
																											mittleren
																											Lage
																											symmetrischer
																											Verbundwerkstoff
																											gefertigt
																											werden.
																		
			
				
																						In
																											this
																											specific
																											example,
																											a
																											composite
																											material
																											can
																											be
																											produced
																											which
																											is
																											symmetrical
																											in
																											relation
																											to
																											the
																											middle
																											layer
																											in
																											terms
																											of
																											material
																											technology.
															 
				
		 EuroPat v2
			
																						Besonders
																											in
																											der
																											tiefen
																											und
																											mittleren
																											Lage
																											ist
																											der
																											Klang
																											herrlich
																											voll
																											und
																											rund.
																		
			
				
																						Especially
																											in
																											the
																											low
																											and
																											middle
																											ranges
																											the
																											sound
																											is
																											gloriously
																											full
																											and
																											round.
															 
				
		 ParaCrawl v7.1
			
																						Wenn
																											das
																											aktuelle
																											Bildsignal
																											VID
																											nun
																											bei
																											einer
																											Relativgeschwindigkeit
																											von
																											Null
																											zwischen
																											Abtasteinheit
																											ABE
																											und
																											Aufzeichnungsträger
																											lagesynchron
																											zu
																											dem
																											korrelierten
																											Bildsignal
																											VIDk
																											der
																											mittleren
																											Lage
																											sein
																											soll,
																											dann
																											muß
																											auch
																											dieses
																											verzögert
																											werden.
																		
			
				
																						If
																											the
																											current
																											image
																											signal
																											VID,
																											given
																											a
																											relative
																											velocity
																											of
																											0
																											between
																											the
																											scanning
																											unit
																											ABE
																											and
																											the
																											recording
																											medium,
																											is
																											now
																											to
																											be
																											positioned,
																											synchronous
																											to
																											the
																											correlated
																											image
																											signal
																											VIDK
																											of
																											the
																											center
																											position,
																											then
																											it,
																											also,
																											must
																											be
																											delayed.
															 
				
		 EuroPat v2
			
																						Der
																											Stellstab
																											kann
																											gemäß
																											einem
																											weiteren
																											Merkmal
																											der
																											Erfindung
																											in
																											einer
																											parallel
																											zum
																											mittleren
																											Tragstab
																											verlaufenden
																											Lage
																											an
																											diesem
																											festlegbar
																											sein,
																											so
																											daß
																											er
																											nach
																											dem
																											Aufspreizen
																											des
																											Bezuges
																											und
																											dem
																											Ausstellen
																											des
																											geöffneten
																											Schutzdaches
																											ohne
																											Beeinträchtigung
																											der
																											Nutzfläche
																											und
																											des
																											optischen
																											Eindruckes
																											untergebracht
																											ist.
																		
			
				
																						In
																											accordance
																											with
																											another
																											feature
																											of
																											the
																											invention
																											the
																											adjustment
																											bar
																											can
																											be
																											locked
																											on
																											the
																											central
																											support
																											strut
																											in
																											a
																											position
																											extending
																											parallel
																											to
																											it
																											so
																											that
																											after
																											spreading
																											the
																											covering
																											open
																											and
																											extending
																											or
																											raising
																											the
																											opened
																											protective
																											roof,
																											it
																											is
																											located
																											in
																											a
																											position
																											which
																											does
																											not
																											interfere
																											with
																											the
																											useful
																											area
																											or
																											its
																											esthetic
																											appearance.
															 
				
		 EuroPat v2
			
																						Wird
																											der
																											Hallsensor
																											in
																											einer
																											mittleren
																											Lage
																											zwischen
																											den
																											Polen
																											des
																											Magneten
																											angeordnet,
																											so
																											zeigt
																											die
																											Polarität
																											des
																											Hallsignals
																											die
																											Kraftrichtung
																											unmittelbar
																											an.
																		
			
				
																						If,
																											in
																											a
																											rest
																											position
																											of
																											the
																											force
																											sensor,
																											the
																											Hall
																											effect
																											transducer
																											is
																											located
																											in
																											a
																											central
																											position
																											between
																											the
																											poles
																											of
																											the
																											magnet,
																											then
																											the
																											polarity
																											of
																											the
																											output
																											signal
																											from
																											the
																											Hall
																											effect
																											transducer
																											will
																											directly
																											indicate
																											the
																											direction
																											of
																											the
																											force
																											application.
															 
				
		 EuroPat v2
			
																						Die
																											Ausfederungs-Stoßdämpfung
																											(Ringspaltbereich
																											88
																											in
																											Verbindung
																											mit
																											der
																											Mündungsöffnung
																											90
																											des
																											Kanals
																											64)
																											setzt,
																											ausgehend
																											von
																											der
																											mittleren
																											Lage,
																											ebenfalls
																											beispielsweise
																											nach
																											etwa
																											20
																											mm
																											Weg,
																											allerdings
																											in
																											Ausfederungsrichtung
																											gesehen,
																											ein.
																		
			
				
																						The
																											rebound
																											shock-absorbing
																											effect
																											(annular
																											gap
																											area
																											(88)
																											in
																											conjunction
																											with
																											mouth
																											opening
																											(90)
																											of
																											channel
																											(64))
																											also
																											starts
																											after
																											a
																											path
																											of
																											about
																											20
																											mm,
																											although
																											in
																											the
																											rebound
																											direction
																											in
																											this
																											case,
																											again
																											starting
																											from
																											the
																											middle
																											position.
															 
				
		 EuroPat v2
			
																						Befindet
																											sich
																											der
																											Hebel
																											Senk-Schalter
																											jedoch
																											in
																											seiner
																											neutralen,
																											mittleren
																											Lage,
																											so
																											ist
																											das
																											Steuersystem
																											arbeitsunfähig,
																											eine
																											Bewegung
																											der
																											Anhängevorrichtung
																											wird
																											unterdrückt
																											und
																											das
																											System
																											spricht
																											nicht
																											auf
																											Bewegungen
																											des
																											Hubwellensteuerknopfes
																											an.
																		
			
				
																						However,
																											when
																											the
																											three-position
																											switch
																											is
																											in
																											its
																											"neutral"
																											or
																											center
																											position,
																											then
																											the
																											control
																											system
																											is
																											disabled,
																											hitch
																											movement
																											is
																											prevented
																											and
																											the
																											system
																											does
																											not
																											respond
																											to
																											movement
																											of
																											the
																											rockshaft
																											control
																											knob.
															 
				
		 EuroPat v2
			
																						Die
																											dem
																											Möbelkorpusinneren
																											im
																											montierten
																											Zustand
																											zugewandte
																											innere
																											Lage
																											2a
																											bzw.
																											3a
																											der
																											Seitenwandungen
																											2
																											bzw.
																											3
																											hat
																											jeweils
																											in
																											dem
																											veranschaulichten
																											Ausführungsbeispiel
																											3
																											übereinander
																											angeordnete
																											Seitenwandungsschlitze
																											10
																											(Fig.
																											2
																											und
																											4),
																											an
																											die
																											sich
																											im
																											montierten
																											Zustand
																											in
																											der
																											mittleren
																											Lage
																											2b
																											bzw.
																											3b
																											fensterförmige
																											Aufnahmeräume
																											11
																											(Fig.
																											1,
																											2
																											und
																											4)
																											anschließen.
																		
			
				
																						In
																											example
																											3
																											of
																											the
																											operation
																											shown,
																											the
																											inner
																											layer
																											2a
																											or
																											3a
																											of
																											the
																											sidewalls
																											2
																											or
																											3,
																											which
																											faces
																											the
																											interior
																											of
																											the
																											corpus
																											in
																											the
																											assembled
																											state,
																											has
																											in
																											each
																											case
																											sidewall
																											slots
																											10
																											(FIGS.
																											2
																											and
																											4),
																											which
																											are
																											disposed
																											one
																											above
																											the
																											other
																											and
																											adjoining
																											which
																											there
																											are
																											window-shaped
																											accommodating
																											spaces
																											11
																											(FIGS.
																											1,
																											2
																											and
																											4)
																											in
																											the
																											middle
																											layer
																											2b
																											and
																											3b
																											in
																											the
																											assembled
																											state.
															 
				
		 EuroPat v2
			
																						Diese
																											Anschlußstücke
																											sind
																											dreilagig
																											aufgebaut,
																											wobei
																											der
																											Verschlußschieber
																											in
																											der
																											mittleren
																											Lage
																											zwischen
																											zwei
																											einander
																											entgegengesetzten,
																											den
																											Verschlußschieber
																											führenden
																											Führungspartien
																											enthalten
																											ist.
																		
			
				
																						Such
																											connecting
																											members
																											have
																											a
																											three-ply
																											structure,
																											the
																											slide
																											gate
																											being
																											contained
																											in
																											the
																											center
																											ply
																											between
																											two
																											mutually
																											opposite
																											guide
																											parts
																											for
																											the
																											slide
																											gate.
															 
				
		 EuroPat v2
			
																						Hinter
																											den
																											Stanzstationen
																											48
																											erfolgt
																											eine
																											Zusammenführung
																											aller
																											drei
																											mit
																											Einschnitten
																											27
																											und
																											30
																											versehenen
																											(Material-)Bahnen
																											26,
																											indem
																											die
																											beiden
																											äußeren
																											Lagen
																											22
																											über
																											Umlenkrollen
																											49
																											zur
																											mittleren,
																											inneren
																											Lage
																											23
																											geführt
																											werden
																											zwischen
																											einem
																											Walzenpaar
																											50
																											hindurch.
																		
			
				
																						Downstream
																											of
																											the
																											blanking
																											stations
																											48
																											all
																											three
																											webs
																											of
																											material
																											26
																											provided
																											with
																											incisions
																											27
																											and
																											30
																											are
																											brought
																											together
																											by
																											guiding
																											the
																											two
																											outer
																											layers
																											22
																											by
																											deflecting
																											rollers
																											49
																											toward
																											the
																											central,
																											inner
																											layer
																											23,
																											in
																											between
																											a
																											pair
																											of
																											rolls
																											50.
															 
				
		 EuroPat v2
			
																						Hierbei
																											weist
																											das
																											im
																											Gehäuseraum
																											angeordnete
																											isolierte
																											Leiterband
																											eine
																											solche
																											Länge
																											auf,
																											daß
																											es
																											dem
																											beidseitig
																											etwa
																											drei
																											Umdrehungen
																											betragenden
																											Lenkradausschlag
																											zu
																											folgen
																											vermag,
																											wobei
																											sich
																											das
																											Leiter
																											band
																											während
																											des
																											Lenkradausschlages
																											aus
																											einer
																											mittleren
																											Lage
																											in
																											der
																											einen
																											Richtung
																											bis
																											zur
																											Anlage
																											an
																											dem
																											stationären
																											Gehäuse
																											nach
																											außen
																											aufweitet
																											und
																											in
																											der
																											anderen
																											Richtung
																											bis
																											zur
																											Anlage
																											an
																											dem
																											Rotor
																											nach
																											innen
																											zusammenzieht.
																		
			
				
																						The
																											insulated
																											strip
																											conductor
																											in
																											the
																											housing
																											space
																											is
																											long
																											enough
																											to
																											follow
																											the
																											rotation
																											of
																											the
																											steering
																											wheel
																											which
																											amounts
																											to
																											about
																											three
																											revolutions
																											on
																											either
																											side.
																											The
																											strip
																											conductor
																											widens
																											to
																											the
																											outside
																											during
																											deflection
																											of
																											the
																											steering
																											wheel
																											from
																											a
																											center
																											position
																											in
																											one
																											direction
																											until
																											it
																											abuts
																											against
																											the
																											stationary
																											housing,
																											and
																											contracts
																											inwardly
																											during
																											deflection
																											in
																											the
																											other
																											direction
																											until
																											it
																											abuts
																											against
																											the
																											rotor.
															 
				
		 EuroPat v2
			
																						Dadurch
																											liegen
																											die
																											Endbereiche
																											der
																											Zigaretten
																											20
																											der
																											mittleren
																											Lage
																											33
																											ebenfalls
																											frei,
																											so
																											daß
																											die
																											zugeordneten
																											Empfänger
																											28
																											benachbart
																											zu
																											den
																											Enden
																											dieser
																											Zigaretten
																											angeordnet
																											werden
																											können.
																		
			
				
																						As
																											a
																											result,
																											the
																											end
																											regions
																											of
																											the
																											cigarettes
																											20
																											of
																											the
																											middle
																											layer
																											33
																											are
																											likewise
																											exposed,
																											so
																											that
																											the
																											associated
																											receivers
																											28
																											can
																											be
																											arranged
																											adjacent
																											to
																											the
																											ends
																											of
																											these
																											cigarettes.
															 
				
		 EuroPat v2
			
																						Im
																											Bereich
																											der
																											mittleren
																											Lage
																											33
																											ist
																											innenseitig
																											an
																											der
																											Vorderwand
																											37
																											ein
																											rippenartiger
																											Ansatz
																											48
																											angeformt,
																											der
																											zur
																											Lagerung
																											einer
																											Lampenreihe
																											49
																											in
																											entsprechenden
																											Haltebohrungen
																											39
																											dient.
																		
			
				
																						Formed
																											on
																											the
																											inside
																											of
																											the
																											front
																											wall
																											37,
																											in
																											the
																											region
																											of
																											the
																											middle
																											layer
																											33,
																											is
																											a
																											rib-like
																											extension
																											48
																											which
																											serves
																											for
																											mounting
																											a
																											row
																											of
																											lamps
																											49
																											in
																											corresponding
																											retaining
																											bores
																											39.
															 
				
		 EuroPat v2
			
																						Das
																											andere
																											Ende
																											der
																											Blattfeder
																											72
																											ist
																											in
																											einem
																											rahmenfesten
																											Federsitz
																											74
																											festgelegt,
																											dessen
																											Lage
																											wiederum
																											so
																											gewählt
																											ist,
																											daß
																											die
																											Blattfeder
																											72
																											bei
																											ausgerücktem
																											Bremshebel
																											48
																											und
																											eingerücktem
																											Bremshebel
																											48
																											um
																											gleiche
																											Beträge
																											aus
																											einer
																											mittleren,
																											instabilen
																											Lage
																											in
																											entgegengesetzter
																											Richtung
																											ausgelenkt
																											ist.
																		
			
				
																						The
																											other
																											end
																											of
																											the
																											leaf
																											spring
																											72
																											is
																											fixed
																											in
																											a
																											spring
																											seat
																											74
																											integral
																											with
																											the
																											frame,
																											the
																											position
																											of
																											which
																											is
																											again
																											chosen
																											so
																											that
																											when
																											the
																											brake
																											lever
																											48
																											is
																											disengaged
																											and
																											when
																											the
																											brake
																											lever
																											48
																											is
																											engaged,
																											the
																											leaf
																											spring
																											72
																											is
																											deflected
																											in
																											opposite
																											directions
																											by
																											the
																											same
																											amounts
																											from
																											a
																											central,
																											unstable
																											position.
															 
				
		 EuroPat v2
			
																						Die
																											Erfindung
																											umfaßt
																											noch
																											eine
																											weitere
																											Lösung
																											der
																											gestellten
																											Aufgabe,
																											die
																											darin
																											besteht,
																											daß
																											die
																											Werkzeuge
																											über
																											eine
																											Verschiebevorrichtung
																											mit
																											ihren
																											Stößeln
																											verbunden
																											und
																											aus
																											der
																											zur
																											Kraftrichtung
																											der
																											Antriebseinheit
																											symmetrischen
																											mittleren
																											Lage
																											in
																											beiden
																											Richtungen
																											der
																											Schmiedeachse
																											um
																											je
																											eine
																											halbe
																											Werkzeugbreite
																											verschiebbar
																											sind.
																		
			
				
																						The
																											invention
																											offers
																											a
																											further
																											solution
																											to
																											the
																											present
																											object
																											in
																											that
																											the
																											tools
																											are
																											connected
																											to
																											their
																											rams
																											through
																											a
																											shifting
																											device
																											permitting
																											each
																											tool
																											to
																											be
																											shifted
																											by
																											half
																											its
																											width
																											away
																											from
																											the
																											center
																											position
																											which
																											is
																											symmetrical
																											to
																											the
																											direction
																											of
																											the
																											force
																											of
																											the
																											drive
																											unit,
																											in
																											both
																											directions
																											of
																											the
																											forging
																											axis.
															 
				
		 EuroPat v2
			
																						Gewebe
																											nach
																											einem
																											der
																											Ansprüche
																											1
																											bis
																											4,
																											dadurch
																											gekennzeichnet,
																											daß
																											die
																											Schußfäden
																											der
																											mittleren
																											Lage
																											aus
																											einem
																											hochmolekularen
																											Polyestermaterial
																											mit
																											einer
																											Bruchdehnung
																											kleiner
																											als
																											30%
																											und
																											einem
																											Viskositätsindex
																											des
																											Polymers
																											über
																											0,90
																											bestehen.
																		
			
				
																						The
																											drainage
																											fabric
																											defined
																											in
																											claim
																											1
																											wherein
																											said
																											weft
																											threads
																											of
																											said
																											middle
																											layer
																											are
																											composed
																											of
																											high
																											molecular
																											weight
																											polyester
																											with
																											an
																											elongation
																											to
																											break
																											of
																											less
																											than
																											30%
																											and
																											a
																											polymer
																											viscosity
																											index
																											in
																											excess
																											of
																											0.90.
															 
				
		 EuroPat v2
			
																						Die
																											Einschnitte
																											30
																											dienen
																											dazu,
																											daß
																											im
																											auf
																											einen
																											Tragbalken
																											31
																											eines
																											Traggerüstes
																											32
																											aufgehängten
																											Zustand
																											die
																											von
																											oben
																											auf
																											den
																											Tropfkörper
																											aufgerieselte
																											Flüssigkeit
																											zu
																											den
																											Streifen
																											20
																											der
																											mittleren
																											Lage
																											23
																											bzw.
																											der
																											zum
																											Tragbalken
																											31
																											gerichteten
																											äußeren
																											Lage
																											22
																											gelangen
																											kann,
																											also
																											eine
																											gleichmäßige
																											Benetzung
																											der
																											Streifen
																											20
																											sämtlicher
																											Lagen
																											22
																											bzw.
																											23
																											gewährleistet
																											ist.
																		
			
				
																						The
																											purpose
																											of
																											the
																											incisions
																											30
																											is
																											to
																											ensure
																											that,
																											when
																											in
																											the
																											suspended
																											state
																											on
																											a
																											supporting
																											bar
																											31
																											of
																											a
																											supporting
																											frame
																											32,
																											the
																											liquid
																											trickled
																											downward
																											onto
																											the
																											trickling
																											filter
																											can
																											get
																											to
																											the
																											strips
																											20
																											of
																											the
																											central
																											layer
																											23
																											and
																											to
																											the
																											outer
																											layer
																											22
																											oriented
																											toward
																											the
																											supporting
																											bar
																											31,
																											i.e.,
																											to
																											ensure
																											uniform
																											wetting
																											of
																											the
																											strips
																											20
																											of
																											all
																											the
																											layers
																											22
																											and
																											23.
															 
				
		 EuroPat v2
			
																						In
																											bevorzugter
																											Ausgestaltung
																											der
																											Erfindung
																											weisen
																											die
																											Sekundärwicklungen
																											insgesamt
																											drei
																											Anschlüsse
																											bzw.
																											Anschluß-Platten
																											auf,
																											die
																											an
																											der
																											radial
																											innersten,
																											der
																											radial
																											äußersten
																											und
																											einer
																											mittleren
																											Windungs-Lage
																											(Mittenabgriff)
																											der
																											Sekundärwicklung
																											angeschlossen
																											sind.
																		
			
				
																						In
																											a
																											preferred
																											embodiment
																											of
																											the
																											invention
																											the
																											secondary
																											windings
																											have
																											a
																											total
																											of
																											three
																											connectors
																											or
																											connecting
																											plates
																											which
																											are
																											connected
																											to
																											the
																											radially
																											innermost,
																											the
																											radially
																											outermost
																											and
																											a
																											central
																											winding
																											layer
																											(centre
																											tapping)
																											of
																											the
																											secondary
																											winding.
															 
				
		 EuroPat v2
			
																						Die
																											die
																											an
																											der
																											radial
																											innersten
																											Windungs-Lage
																											der
																											Sekundärwicklung
																											und
																											die
																											an
																											der
																											radial
																											äußersten
																											Windungs-Lage
																											der
																											Sekundärwicklung
																											angeschlossene
																											Anschluß-Streifen
																											verbindenden
																											Anschluß-Platten
																											werden
																											dann
																											zweckmäßig
																											seitlich
																											zueinander
																											versetzt
																											in
																											einer
																											Ebene
																											angeordnet,
																											während
																											die
																											die
																											an
																											der
																											mittleren
																											Windungs-Lage
																											angeschlossenen
																											Anschluß-Streifen
																											verbindende
																											Anschluß-Platte
																											in
																											einer
																											demgegenüber
																											parallel
																											versetzten
																											Ebene
																											angeordnet
																											ist.
																		
			
				
																						The
																											connecting
																											plates
																											connecting
																											the
																											connecting
																											strips
																											connected
																											to
																											the
																											radially
																											innermost
																											winding
																											layer
																											of
																											the
																											secondary
																											winding
																											and
																											those
																											connected
																											to
																											the
																											radially
																											outer
																											most
																											winding
																											layer
																											of
																											the
																											secondary
																											winding
																											are
																											then
																											conveniently
																											arranged
																											in
																											a
																											plane
																											laterally
																											offset
																											from
																											one
																											another
																											whilst
																											the
																											connecting
																											plate
																											connecting
																											the
																											connecting
																											strips
																											connected
																											to
																											the
																											central
																											winding
																											layer
																											is
																											arranged
																											in
																											a
																											parallel
																											plane
																											offset
																											with
																											respect
																											thereto.
															 
				
		 EuroPat v2
			
																						Nachdem
																											das
																											Wenden
																											unterdrückt
																											(nicht
																											aktiviert)
																											ist,
																											ermöglicht
																											(aktiviert)
																											der
																											Algorithmus
																											das
																											Wenden
																											des
																											Fahrzeugs
																											dann,
																											wenn
																											das
																											Lenkelement
																											66
																											zunächst
																											in
																											seine
																											mittlere
																											Lage
																											ist
																											und
																											dann
																											aus
																											seiner
																											mittleren
																											Lage
																											weggedreht
																											wird.
																		
			
				
																						The
																											algorithm,
																											after
																											disabling
																											of
																											turning,
																											enables
																											turning
																											of
																											the
																											vehicle
																											if
																											the
																											steering
																											member
																											66
																											is
																											rotated
																											to
																											its
																											centered
																											position
																											and
																											then
																											rotated
																											away
																											from
																											its
																											centered
																											position.
															 
				
		 EuroPat v2
			
																						Die
																											Zeilen
																											74
																											-
																											76
																											wirken
																											so,
																											daß
																											die
																											Wendegeschwindigkeit
																											stufenweise
																											auf
																											den
																											Geschwindigkeitswert
																											zurückgeführt
																											wird,
																											der
																											während
																											eines
																											normalen
																											Betriebs
																											wirksam
																											ist,
																											wenn
																											das
																											Lenkelement
																											66
																											zu
																											seiner
																											mittleren
																											Lage
																											zurückkehrt.
																		
			
				
																						Lines
																											74-76
																											operate
																											so
																											that
																											the
																											turning
																											rate
																											gradually
																											returns
																											to
																											the
																											rate
																											effective
																											during
																											normal
																											operation
																											as
																											the
																											steering
																											member
																											66
																											returns
																											to
																											its
																											center
																											position.
															 
				
		 EuroPat v2
			
																						Verstellbarer
																											Rückspiegel
																											nach
																											einem
																											der
																											Ansprüche
																											1
																											bis
																											4,
																											dadurch
																											gekennzeichnet,
																											daß
																											die
																											Verschwenkbarkeit
																											(a)
																											der
																											schalenförmigen
																											Elemente
																											(1,
																											2)
																											zueinander
																											ausgehend
																											von
																											einer
																											mittleren
																											Lage
																											maximal
																											±
																											25°,
																											insbesondere
																											±
																											15°,
																											beträgt.
																		
			
				
																						The
																											adjustable
																											rearview
																											mirror
																											according
																											to
																											claim
																											1,
																											swivel
																											capability
																											of
																											said
																											dish-shaped
																											elements
																											relative
																											to
																											one
																											another
																											starting
																											from
																											a
																											central
																											position
																											amounts
																											to
																											a
																											maximum
																											of
																											±25°.
															 
				
		 EuroPat v2