Übersetzung für "Schockartig" in Englisch
																						Durch
																											die
																											Zugabe
																											des
																											Wassers
																											wird
																											das
																											Reaktionsmedium
																											schockartig
																											abgekühlt.
																		
			
				
																						The
																											addition
																											of
																											the
																											water
																											abruptly
																											chills
																											the
																											reaction
																											medium.
															 
				
		 EuroPat v2
			
																						Allerdings
																											erfolgt
																											dieses
																											Abkühlen
																											nicht
																											schockartig,
																											sondern
																											genauso
																											schonend
																											wie
																											das
																											Aufheizen.
																		
			
				
																						However,
																											this
																											cooling
																											does
																											not
																											take
																											place
																											in
																											an
																											abrupt
																											manner,
																											but
																											just
																											as
																											gently
																											as
																											the
																											heating.
															 
				
		 EuroPat v2
			
																						Die
																											erfolgt
																											bei
																											einem
																											Feuer
																											recht
																											langsam,
																											bei
																											einer
																											Explosion
																											hingegen
																											schockartig.
																		
			
				
																						In
																											case
																											of
																											a
																											fire,
																											this
																											proceeds
																											slowly,
																											in
																											case
																											of
																											an
																											explosion
																											abruptly.
															 
				
		 ParaCrawl v7.1
			
																						Oder
																											beispielsweise
																											kann
																											ein
																											bestimmter
																											Bereich
																											des
																											Schichtsystems
																											zeitlich
																											sehr
																											schnell
																											(schockartig)
																											gekühlt
																											werden.
																		
			
				
																						Or,
																											for
																											example,
																											a
																											specific
																											region
																											of
																											the
																											layer
																											system
																											can
																											be
																											cooled
																											temporally
																											very
																											quickly
																											(abruptly).
															 
				
		 EuroPat v2
			
																						Wäre
																											es
																											nicht
																											konsequent,
																											den
																											Kohäsionsfonds,
																											wenn
																											auch
																											nicht
																											schockartig,
																											so
																											doch
																											in
																											Form
																											eines
																											phasing
																											out
																											auslaufen
																											zu
																											lassen?
																		
			
				
																						Would
																											it
																											not
																											have
																											been
																											consistent
																											to
																											let
																											the
																											Cohesion
																											Fund
																											expire,
																											not
																											abruptly
																											perhaps
																											but
																											by
																											its
																											being
																											phased
																											out?
															 
				
		 Europarl v8
			
																						Zum
																											anderen
																											werden
																											durch
																											die
																											auf
																											maximal
																											240°C
																											aufgeheizten
																											im
																											Heissgasstrom
																											liegenden
																											Gebläseteile,
																											die
																											aus
																											dem
																											Brenngut
																											verflüchtigten,
																											schädlichen
																											und
																											zu
																											Anbackungen
																											neigenden
																											Alkali-
																											oder
																											Schwefelverbindungen
																											schockartig
																											abgekühlt
																											und
																											aus
																											den
																											Heissgasen
																											auskristalliert,
																											so
																											dass
																											sich
																											am
																											Gebläse
																											bzw.
																											an
																											den
																											Gebläseschaufeln
																											keine
																											Ansätze
																											bilden
																											können,
																											die
																											entweder
																											die
																											Durchsatzcharakteristik
																											des
																											Gebläses
																											negativ
																											beeinflussen
																											oder
																											aber
																											zu
																											erhöhten
																											Lagerbelastungen
																											am
																											Gebläse
																											führen.
																		
			
				
																						On
																											the
																											other
																											hand,
																											through
																											the
																											blower
																											parts
																											lying
																											in
																											the
																											hot
																											gas
																											current
																											heated
																											to
																											a
																											maximum
																											of
																											240°
																											C.,
																											the
																											harmful
																											alkali
																											or
																											sulphur
																											compounds
																											inclined
																											to
																											caking
																											are
																											cooled
																											in
																											a
																											shock
																											manner
																											out
																											of
																											the
																											calcination
																											material
																											and
																											crystallized
																											out
																											of
																											the
																											hot
																											gases
																											so
																											that
																											no
																											deposits
																											may
																											form
																											on
																											the
																											blower
																											or
																											on
																											the
																											blower
																											blades,
																											respectively,
																											which
																											either
																											negatively
																											influence
																											the
																											output
																											characteristics
																											of
																											the
																											blower
																											or,
																											however,
																											lead
																											to
																											increased
																											bearing
																											loads
																											on
																											the
																											blower.
															 
				
		 EuroPat v2
			
																						Nachteilig
																											sind
																											dabei
																											auch
																											die
																											in
																											den
																											Blöcken
																											schockartig
																											erzeugten
																											Spannungen,
																											die
																											ein
																											Reißen
																											der
																											Blöcke
																											bewirken
																											können.
																		
			
				
																						A
																											further
																											disadvantage
																											of
																											such
																											a
																											practice
																											is
																											the
																											shock-like
																											production
																											of
																											stresses
																											which
																											can
																											cause
																											the
																											cracks
																											in
																											the
																											carbon
																											blocks.
															 
				
		 EuroPat v2
			
																						Durch
																											das
																											Einblasen
																											der
																											in
																											der
																											Vorlaufstrecke
																											bereits
																											auf
																											eine
																											Temperatur
																											zwischen
																											500°
																											und
																											600°
																											C
																											aufgezeizten,
																											sehr
																											feinkörnigen
																											Additiv-Partikel
																											in
																											die
																											unmittelbar
																											nach
																											Einblasdüse
																											beginnende
																											heiße
																											Flammenzone
																											der
																											Brennkammer
																											wird
																											das
																											Additiv
																											nahezu
																											schockartig
																											versintert
																											und
																											damit
																											"versiegelt"
																											zusammen
																											mit
																											den
																											nicht
																											brennbaren
																											Ballaststoffen
																											des
																											Brennstoffes
																											der
																											Asche
																											zugeführt.
																		
			
				
																						Because
																											of
																											the
																											injection
																											of
																											the
																											very
																											fine-grained
																											additive
																											particles
																											which
																											had
																											already
																											been
																											heated
																											to
																											a
																											temperature
																											of
																											between
																											500°
																											and
																											600°
																											C.
																											in
																											the
																											leading
																											zone,
																											into
																											the
																											hot
																											zone
																											of
																											flame
																											of
																											the
																											combustion
																											chamber
																											which
																											begins
																											immediately
																											after
																											the
																											injection
																											nozzle
																											the
																											additive
																											is
																											almost
																											abruptly
																											sintered
																											and
																											thus
																											"sealed"
																											and
																											passed
																											to
																											the
																											ash
																											together
																											with
																											the
																											incombustible
																											ballast
																											materials
																											of
																											the
																											fuel.
															 
				
		 EuroPat v2
			
																						Wie
																											bereits
																											erwähnt,
																											werden
																											die
																											in
																											einer
																											solchen
																											Straße
																											erzeugten
																											Formkörper
																											alsdann
																											einem
																											Härtetunnel
																											(Tiefkühltunnel)
																											zugeführt,
																											wo
																											sie
																											schnell
																											und
																											schockartig
																											auf
																											Lagertemperaturen
																											von
																											etwa
																											-30°C
																											abgekühlt
																											werden.
																		
			
				
																						As
																											already
																											mentioned,
																											the
																											shaped
																											bodies
																											produced
																											in
																											such
																											a
																											line
																											are
																											then
																											moved
																											into
																											a
																											hardening
																											tunnel
																											(deep-freezing-tunnel)
																											where
																											they
																											are
																											rapidly
																											shock-cooled
																											to
																											storage
																											temperatures
																											of
																											about
																											-30°
																											C.
															 
				
		 EuroPat v2
			
																						Zusätzlich
																											zu
																											dieser
																											Verbindung
																											von
																											Gurtaufwickelwelle
																											und
																											Seilscheibe
																											kann
																											vorgesehen
																											sein,
																											eine
																											besondere
																											Dämpfung
																											der
																											schockartig
																											auftretenden
																											Drehbelastung
																											der
																											Seilscheibe
																											vorzusehen.
																		
			
				
																						In
																											addition
																											to
																											this
																											connection
																											of
																											the
																											belt
																											reeling-in
																											shaft
																											and
																											the
																											cable
																											pulley,
																											it
																											is
																											also
																											possible
																											to
																											damp
																											the
																											shock-like
																											torsional
																											load
																											of
																											the
																											cable
																											pulley.
															 
				
		 EuroPat v2
			
																						Dadurch
																											wird
																											vermieden,
																											daß
																											sich
																											relativ
																											kaltes
																											Wasser,
																											das
																											durch
																											Dampferzeugung
																											in
																											den
																											Rohren
																											4
																											der
																											Rohrwand
																											2
																											aus
																											diesen
																											Rohren
																											ausgestoßen
																											wird
																											und
																											mit
																											dem
																											erzeugten
																											Dampf
																											den
																											Austrittssammler
																											7
																											verläßt,
																											in
																											die
																											bereits
																											stark
																											aufgeheizte
																											Nachheizfläche
																											13
																											gelangt
																											und
																											diese
																											schockartig
																											abkühlt.
																		
			
				
																						As
																											a
																											result,
																											relatively
																											cold
																											water,
																											which
																											is
																											expelled
																											from
																											the
																											tubes
																											4
																											of
																											the
																											tube
																											wall
																											2
																											by
																											steam
																											production
																											in
																											these
																											tubes
																											and
																											which
																											leaves
																											the
																											outlet
																											header
																											7
																											along
																											with
																											the
																											steam
																											being
																											produced,
																											is
																											prevented
																											from
																											reaching
																											the
																											already
																											severely
																											heated
																											heating
																											surface
																											13
																											and
																											cooling
																											it
																											down
																											abruptly.
															 
				
		 EuroPat v2
			
																						Auf
																											diese
																											Weise
																											wird
																											die
																											gesamte
																											Kinematik
																											vor
																											einer
																											Zerstörung
																											bzw.
																											Beeinträchtigung
																											durch
																											die
																											bei
																											Auslösung
																											der
																											Strammvorrichtung
																											schockartig
																											auftretenden
																											Spitzenkräfte
																											geschützt.
																		
			
				
																						In
																											this
																											manner,
																											the
																											overall
																											kinematics
																											are
																											protected
																											from
																											destruction
																											or
																											impairment
																											by
																											the
																											peak
																											forces
																											which
																											occur
																											in
																											a
																											shock-like
																											manner
																											when
																											the
																											tensioning
																											arrangement
																											is
																											triggered.
															 
				
		 EuroPat v2
			
																						Das
																											schockartig
																											auftretende
																											vom
																											Sperrglied
																											24
																											auf
																											den
																											Zahnring
																											31
																											übertragene
																											hohe
																											Drehmoment
																											wird
																											zu
																											Beginn
																											der
																											Strammbewegung
																											zunächst
																											gedämpft,
																											indem
																											die
																											am
																											Zahnring
																											31
																											ausgeprägten
																											Zapfen
																											36
																											durch
																											die
																											taillenförmigen
																											Einengungen
																											38
																											in
																											den
																											Schlitzen
																											37
																											gepreßt
																											werden,
																											wobei
																											eine
																											entsprechende
																											Verformungsarbeit
																											mit
																											einhergehender
																											Vernichtung
																											der
																											Spitzenenergie
																											erfolgt.
																		
			
				
																						The
																											high
																											torque,
																											which
																											occurs
																											in
																											a
																											shock-like
																											manner,
																											is
																											transmitted
																											from
																											the
																											locking
																											member
																											24
																											to
																											the
																											toothed
																											ring
																											31,
																											and
																											is
																											initially
																											damped
																											at
																											the
																											beginning
																											of
																											the
																											tightening
																											or
																											tensioning
																											movement
																											in
																											that
																											the
																											pins
																											36
																											which
																											are
																											defined
																											on
																											the
																											toothed
																											ring
																											31
																											are
																											pressed
																											by
																											the
																											reduced-width
																											portions
																											38
																											into
																											the
																											holes
																											37,
																											resulting
																											in
																											a
																											corresponding
																											strain
																											or
																											resilience
																											accompanied
																											by
																											nullification
																											of
																											the
																											peak
																											momentum.
															 
				
		 EuroPat v2
			
																						Durch
																											die
																											spontan
																											und
																											schockartig
																											erfolgende
																											Entspannung
																											zwischen
																											dem
																											Trübraum,
																											der
																											die
																											Filterkerzen
																											aufnimmt,
																											und
																											der
																											durch
																											das
																											Schließelement
																											von
																											diesem
																											getrennten
																											Vorlage,
																											d.h.,
																											durch
																											den
																											Druckausgleich
																											von
																											(P
																											2)
																											und
																											(P
																											1)
																											auf
																											den
																											Gesamtdruck
																											(P)
																											-nach
																											der
																											Entspannung-
																											kommt
																											es
																											zu
																											einem
																											schlagartigen
																											Abplatzen
																											des
																											Filterkuchens
																											von
																											der
																											Kerzenoberfläche,
																											sodaß
																											anschließend
																											das
																											Material
																											des
																											Filterkuchens
																											in
																											der
																											Vorlage
																											aufgefangen
																											werden
																											kann.
																		
			
				
																						As
																											a
																											result
																											of
																											the
																											spontaneous
																											and
																											shocklike
																											pressure
																											release
																											taking
																											place
																											between
																											the
																											turbid
																											liquid
																											container
																											holding
																											the
																											filter
																											cartridges
																											and
																											the
																											receiver
																											being
																											separated
																											from
																											said
																											turbid
																											liquid
																											container
																											by
																											means
																											of
																											said
																											locking
																											element,
																											i.e.
																											in
																											consequence
																											of
																											the
																											pressure
																											compensation
																											(P2)
																											and
																											(P1)
																											on
																											the
																											total
																											pressure
																											(P)--after
																											the
																											pressure
																											release--the
																											filter
																											cake
																											suddenly
																											is
																											chipped
																											off
																											from
																											the
																											cartridge
																											surface,
																											so
																											that,
																											subsequently,
																											the
																											material
																											of
																											the
																											filter
																											cake
																											can
																											be
																											collected
																											in
																											the
																											receiver.
															 
				
		 EuroPat v2
			
																						Die
																											bisher
																											bekannt
																											gewordenen
																											Verpackungslaminate
																											weisen
																											den
																											Nachteil
																											auf,
																											nicht
																											alle
																											von
																											der
																											Verpackungsindustrie
																											geforderten
																											Eigenschaften,
																											wie
																											die
																											Planheit
																											(Steifigkeit)
																											nach
																											einer
																											Umformung
																											und
																											die
																											Befähigung
																											der
																											Laminate
																											für
																											Tief-
																											oder
																											Streckziehverfahren
																											und
																											auch
																											für
																											schockartig
																											und/oder
																											langeinwirkende
																											Kälte-
																											und
																											Vakuumbedingungen
																											sowie
																											lange
																											Lagerbedingungen,
																											Pasteurisier-
																											und
																											Sterilisierbedingungen
																											gleichermassen
																											geeignet
																											zu
																											sein.
																		
			
				
																						The
																											packaging
																											laminates
																											known
																											up
																											to
																											now
																											exhibit
																											the
																											disadvantage
																											of
																											not
																											being
																											equally
																											suitable
																											at
																											meeting
																											all
																											of
																											the
																											properties
																											required
																											by
																											the
																											packaging
																											industry,
																											such
																											as
																											flatness
																											(rigidity)
																											after
																											shaping,
																											ability
																											to
																											be
																											deep-drawn
																											or
																											stretch-drawn,
																											to
																											withstand
																											shock
																											and/or
																											long
																											term
																											cooling,
																											vacuum
																											conditions,
																											long
																											term
																											storage
																											and
																											pasteurising
																											and
																											sterilising
																											conditions.
															 
				
		 EuroPat v2
			
																						Ein
																											weiteres
																											Verfahren
																											zur
																											Herstellung
																											der
																											Modifikation
																											2
																											der
																											Verbindung
																											der
																											Formel
																											I
																											besteht
																											darin,
																											die
																											Modifikation
																											1
																											oder
																											Mischungen
																											der
																											Modifikationen
																											1
																											und
																											2
																											in
																											einem
																											Lösungsmittel
																											zu
																											lösen
																											und
																											dann
																											schockartig
																											auf
																											Temperaturen
																											von
																											etwa
																											-5°C
																											bis
																											-25°C
																											abzukühlen.
																		
			
				
																						A
																											further
																											process
																											for
																											the
																											preparation
																											of
																											the
																											first
																											crystal
																											modification
																											of
																											the
																											compound
																											of
																											formula
																											I
																											comprises
																											dissolving
																											the
																											second
																											crystal
																											modification
																											or
																											mixtures
																											of
																											the
																											first
																											and
																											second
																											crystal
																											modifications
																											in
																											a
																											solvent
																											and
																											then
																											cooling
																											the
																											solution
																											abruptly
																											to
																											temperatures
																											of
																											from
																											about
																											?5°
																											C.
																											to
																											about
																											?25°
																											C.
																											The
																											terms
																											“solution”
																											and
																											“suspension”
																											are
																											used
																											interchangeably
																											throughout
																											and
																											are
																											meant
																											to
																											include
																											circumstances
																											where
																											a
																											solid
																											or
																											solids
																											is
																											placed
																											in
																											a
																											solvent
																											or
																											a
																											mixture
																											of
																											solvents
																											regardless
																											of
																											solubility.
															 
				
		 EuroPat v2
			
																						Wenn
																											beim
																											Einlauf
																											eines
																											kalten
																											Gutes
																											in
																											das
																											aufgeheizte
																											Trommelgehäuse
																											die
																											Blechstreifen
																											beim
																											Kontakt
																											mit
																											dem
																											Gut
																											schockartig
																											abkühlen
																											so
																											gilt
																											dies
																											zunächst
																											nicht
																											für
																											die
																											Böden,
																											so
																											daß
																											es
																											größere
																											Spannungen
																											im
																											Material
																											gibt,
																											die
																											zu
																											Rissen
																											oder
																											Verbeulungen
																											an
																											der
																											Trommel
																											führen
																											können.
																		
			
				
																						When
																											a
																											cold
																											material
																											enters
																											the
																											heated
																											drum
																											housing,
																											the
																											sheet
																											metal
																											strips
																											cool
																											off
																											abruptly
																											on
																											contact
																											with
																											the
																											material;
																											this
																											does
																											not
																											initially
																											affect
																											the
																											bottoms,
																											so
																											that
																											considerable
																											stress
																											is
																											developed
																											in
																											the
																											material
																											that
																											could
																											cause
																											cracks
																											or
																											dents
																											in
																											the
																											drum.
															 
				
		 EuroPat v2
			
																						Die
																											Zündladung
																											28
																											wird
																											gegen
																											den
																											als
																											Amboß
																											wirkenden
																											Zapfen
																											30
																											des
																											Ventilkörpers
																											65
																											schockartig
																											gepreßt
																											und
																											damit
																											gezündet.
																		
			
				
																						The
																											firing
																											charge
																											28
																											is
																											pressed
																											shock-like
																											against
																											the
																											projection
																											portion
																											30
																											of
																											the
																											valve
																											body
																											65,
																											which
																											acts
																											as
																											an
																											anvil,
																											and
																											fired
																											as
																											a
																											result.
															 
				
		 EuroPat v2
			
																						Das
																											fixierte,
																											160°C
																											heiße
																											Kabel
																											wird
																											nach
																											seinem
																											Austritt
																											aus
																											dem
																											3.
																											Septett
																											mit
																											einer
																											50°C
																											warmen
																											wässrigen
																											Präparationszubereitung
																											besprüht,
																											wobei
																											sich
																											das
																											Kabel
																											schockartig
																											abkühlt.
																		
			
				
																						The
																											set,
																											hot
																											tow
																											at
																											160°
																											C.
																											emerging
																											from
																											the
																											3rd
																											septet
																											is
																											sprayed
																											with
																											warm,
																											aqueous
																											fiber
																											finish
																											at
																											80°
																											C.,
																											and
																											the
																											tow
																											cools
																											down
																											in
																											shocklike
																											manner.
															 
				
		 EuroPat v2