Übersetzung für "Standardrezeptur" in Englisch
																						Ein
																											Stabilitätsvergleich
																											mit
																											einer
																											Standardrezeptur
																											ohne
																											Schutzumhüllung
																											ist
																											der
																											nachfolgenden
																											Tabelle
																											zu
																											entnehmen.
																		
			
				
																						A
																											stability
																											comparison
																											with
																											a
																											standard
																											formula
																											without
																											protective
																											coating
																											is
																											shown
																											in
																											the
																											table
																											which
																											follows.
															 
				
		 EuroPat v2
			
																						Die
																											hautkosmetische
																											Verträglichkeit
																											wurde
																											über
																											den
																											Reizsummenscore
																											gegenüber
																											einer
																											Standardrezeptur
																											bestimmt.
																		
			
				
																						Dermatological
																											compatibility
																											was
																											determined
																											as
																											the
																											total
																											irritation
																											score
																											against
																											a
																											standard
																											formulation.
															 
				
		 EuroPat v2
			
																						Es
																											wird
																											von
																											Leica
																											Microsystems
																											unter
																											strengster
																											Kontrolle
																											nach
																											einer
																											Standardrezeptur
																											hergestellt.
																		
			
				
																						It
																											is
																											manufactured
																											by
																											Leica
																											Microsystems
																											under
																											the
																											strictest
																											controls
																											using
																											a
																											standard
																											formulation.
															 
				
		 ParaCrawl v7.1
			
																						Mischungen
																											dieses
																											Methacrylats
																											mit
																											Triethylenglykoldimethacrylat
																											dienen
																											auch
																											heute
																											noch
																											als
																											Standardrezeptur
																											für
																											dentale
																											plastische
																											Direkt-Füllungswerkstoffe.
																		
			
				
																						Mixtures
																											of
																											this
																											methacrylate
																											with
																											triethylene
																											glycol
																											dimethacrylate
																											are
																											also
																											used
																											nowadays
																											as
																											the
																											standard
																											recipe
																											for
																											dental
																											plastic
																											direct
																											filling
																											materials.
															 
				
		 EuroPat v2
			
																						Mischungen
																											dieses
																											Methacrylats
																											mit
																											Triethylenglykol-dimethacrylat
																											dienen
																											auch
																											heute
																											noch
																											als
																											Standardrezeptur
																											für
																											dentale
																											plastische
																											Direkt-Füllungswerkstoffe.
																		
			
				
																						Mixtures
																											of
																											this
																											methacrylate
																											with
																											triethylene
																											glycol
																											dimethacrylate
																											are
																											still
																											used
																											even
																											today
																											as
																											a
																											standard
																											formulation
																											for
																											dental
																											plastic
																											direct
																											filling
																											materials.
															 
				
		 EuroPat v2
			
																						Die
																											Reaktionsprodukte
																											gemäß
																											Beispiel
																											1
																											bis
																											3
																											wurden
																											in
																											einer
																											Standardrezeptur
																											der
																											vorliegenden
																											Zusammensetzung
																											untersucht.
																		
			
				
																						The
																											reaction
																											products
																											of
																											Examples
																											1
																											to
																											3
																											were
																											tested
																											in
																											a
																											standard
																											formulation.
															 
				
		 EuroPat v2
			
																						Die
																											Bandherstellung
																											erfolgt
																											jeweils
																											mit
																											einer
																											Standardrezeptur
																											nach
																											der
																											britischen
																											Patentschrift
																											1
																											080
																											614
																											auf
																											PVC-PVA-Basis:
																											22,4
																											Gew.-Teile
																											des
																											magnetischen
																											Oxids
																											werden
																											mit
																											8,0
																											Gew.-Teilen
																											eines
																											PVC-PVA-Mischpolymerisats
																											unter
																											Zusatz
																											von
																											1,3
																											Teilen
																											ölsäure,
																											0,88
																											Teilen
																											organischer
																											Phosphorsäureester
																											und
																											67
																											Teilen
																											Butyl/Äthylacetat
																											(1:1)
																											in
																											einer
																											Perlmühle
																											3
																											1/2
																											Stunden
																											gemahlen.
																		
			
				
																						The
																											tape
																											is
																											manufactured
																											in
																											each
																											case
																											from
																											a
																											standard
																											formulation
																											based
																											on
																											PVC-PVA
																											according
																											to
																											British
																											Pat.
																											No.
																											1,080,614:22.4
																											Parts
																											by
																											weight
																											of
																											the
																											magnetic
																											oxide
																											and
																											8.0
																											parts
																											by
																											weight
																											of
																											a
																											PVC-PVA
																											copolymer
																											are
																											milled
																											in
																											a
																											bead
																											mill
																											for
																											31/2
																											hours
																											with
																											the
																											addition
																											of
																											1.3
																											parts
																											of
																											oleic
																											acid,
																											0.88
																											parts
																											of
																											organic
																											phosphoric
																											acid
																											esters
																											and
																											67
																											parts
																											of
																											butyl
																											acetate/ethyl
																											acetate
																											(1:1).
															 
				
		 EuroPat v2
			
																						Die
																											Bandherstellung
																											erfolgt
																											jeweils
																											mit
																											einer
																											Standardrezeptur
																											nach
																											der
																											GB-A
																											1
																											080
																											614
																											auf
																											PVC-PVA-Basis:
																											22,4
																											Gew.-Teile
																											des
																											magnetischen
																											Oxids
																											werden
																											mit
																											8,0
																											Gew-Teilen
																											eines
																											PVC-PVA-Mischpolymerisats
																											unter
																											Zusatz
																											von
																											1,3
																											Teilen
																											Ölsäure,
																											0,88
																											Teilen
																											organischer
																											Phosphorsäureester
																											und
																											67
																											Teilen
																											Butyl/Äthylacetate
																											(1:1)
																											in
																											einer
																											Perlmühle
																											3
																											1/2
																											Stunden
																											gemahlen.
																		
			
				
																						The
																											tape
																											is
																											manufactured
																											in
																											each
																											case
																											from
																											a
																											standard
																											formulation
																											based
																											on
																											PVC-PVA
																											according
																											to
																											British
																											Pat.
																											No.
																											1,080,614:
																											22.4
																											Parts
																											by
																											weight
																											of
																											the
																											magnetic
																											oxide
																											and
																											8.0
																											parts
																											by
																											weight
																											of
																											a
																											PVC-PVA
																											copolymer
																											are
																											milled
																											in
																											a
																											base
																											mill
																											for
																											31/2
																											hours
																											with
																											the
																											addition
																											of
																											1.3
																											parts
																											of
																											oleic
																											acid,
																											0.88
																											parts
																											of
																											organic
																											phosphoric
																											acid
																											esters
																											and
																											67
																											parts
																											of
																											butyl
																											acetate/ethyl
																											acetate
																											(1:1).
															 
				
		 EuroPat v2
			
																						Nach
																											der
																											im
																											Beispiel
																											1
																											angegebenen
																											Standardrezeptur
																											wurden
																											wäßrige
																											saure
																											Reinigerformulierungen
																											hergestellt,
																											deren
																											Zusammensetzung
																											in
																											Tabelle
																											2
																											jeweils
																											angegeben
																											ist.
																		
			
				
																						Aqueous
																											acidic
																											cleaner
																											formulations
																											were
																											prepared
																											according
																											to
																											the
																											standard
																											formulations
																											stated
																											in
																											Example
																											1,
																											the
																											composition
																											of
																											these
																											formulations
																											being
																											shown
																											in
																											each
																											case
																											in
																											Table
																											2.
															 
				
		 EuroPat v2
			
																						Die
																											Wirkung
																											des
																											erfindungsgemäßen
																											Silans
																											gemäß
																											Formel
																											(I),
																											Cyclopentadienylpropyltriethoxisilan,
																											wird
																											in
																											einer
																											Standardrezeptur
																											aus
																											Basis
																											chloriertem
																											Polyäthylen
																											untersucht.
																		
			
				
																						The
																											effect
																											of
																											cyclopentadienylpropyltriethoxysilane,
																											a
																											silane
																											of
																											the
																											invention
																											within
																											formula
																											(I)
																											was
																											investigated
																											in
																											a
																											standard
																											recipe
																											based
																											on
																											chlorinated
																											polyethylene.
															 
				
		 EuroPat v2
			
																						Die
																											Bandherstellung
																											erfolgt
																											jeweils
																											mit
																											einer
																											Standardrezeptur
																											nach
																											der
																											GB-A
																											1
																											080
																											614
																											auf
																											PVC-PVA-Basis:
																											22,4
																											Gew.-Teile
																											des
																											magnetischen
																											Oxids
																											werden
																											mit
																											8,0
																											Gew-Teilen
																											eines
																											PVC-PVA-Mischpolymerisats
																											unter
																											Zusatz
																											von
																											1,3
																											Teilen
																											Ölsäure,
																											0,88
																											Teilen
																											organischer
																											Phorphosäureester
																											und
																											67
																											Teilen
																											Butyl/Äthylacetate
																											(1:
																											1)
																											in
																											einer
																											Perlmühle
																											3
																											1/2
																											Stunden
																											gemahlen.
																		
			
				
																						The
																											tape
																											is
																											manufactured
																											in
																											each
																											case
																											from
																											a
																											standard
																											formulation
																											based
																											on
																											PVC-PVA
																											according
																											to
																											British
																											Pat.
																											No.
																											1,080,614:22.4
																											Parts
																											by
																											weight
																											of
																											the
																											magnetic
																											oxide
																											and
																											8.0
																											parts
																											by
																											weight
																											of
																											a
																											PVC-PVA
																											copolymer
																											are
																											milled
																											in
																											a
																											bead
																											mill
																											for
																											31/2
																											hours
																											with
																											the
																											addition
																											of
																											1.3
																											parts
																											of
																											oleic
																											acid,
																											0.88
																											parts
																											of
																											organic
																											phosphoric
																											acid
																											esters
																											and
																											67
																											parts
																											of
																											butyl
																											acetate/ethyl
																											acetate
																											(1:1).
															 
				
		 EuroPat v2
			
																						Bei
																											den
																											nachfolgenden
																											Beispielen
																											wurden
																											4
																											Gew.-%,
																											entsprechend
																											1,2
																											g,
																											des
																											Natriummetasilikats
																											der
																											Standardrezeptur
																											A
																											durch
																											1
																											Gew.-%,
																											entsprechend
																											0,3
																											g,
																											eines
																											1:
																											1
																											Gemisches
																											aus
																											Amylase
																											und
																											Protease
																											(Maxamyl
																											(R)
																											bzw.
																											Maxatase
																											(R)
																											der
																											Firma
																											Koninklijke
																											Nederlandsche
																											Gist
																											en
																											Spiritus-Fabriek
																											N.V.,
																											Delft)
																											und
																											3
																											Gew.-%,
																											entsprechend
																											0,9
																											g,
																											der
																											in
																											der
																											vorliegenden
																											Tabelle
																											angegebenen
																											Verbindungen
																											ersetzt.
																		
			
				
																						In
																											the
																											following
																											Examples,
																											4%
																											by
																											weight
																											(1.2
																											g)
																											of
																											the
																											sodium
																											metasilicate
																											of
																											standard
																											preparation
																											A,
																											B,
																											C,
																											D,
																											or
																											E,
																											as
																											indicated
																											in
																											Tables
																											2-4,
																											was
																											replaced
																											by
																											1%
																											by
																											weight
																											(0.3
																											g)
																											of
																											a
																											1:1
																											mixture
																											of
																											amylase
																											and
																											protease
																											(MaxamylRTM
																											and
																											MaxataseRTM
																											products
																											of
																											Koninklijke
																											Nederlandsche
																											Gist
																											en
																											Spiritus-Fabriek
																											N.V.,
																											Delft)
																											and
																											3%
																											by
																											weight
																											(0.9
																											g)
																											of
																											the
																											products
																											listed
																											in
																											the
																											following
																											Table.
															 
				
		 EuroPat v2
			
																						Bei
																											den
																											bekannten
																											Kieselsäuren
																											handelt
																											es
																											sich
																											um
																											normal-strukturierte
																											Fällungskieselsäuren,
																											deren
																											Verarbeitung
																											zu
																											Batterieseparatorfolien
																											nach
																											einer
																											gebräuchlichen
																											Standardrezeptur
																											im
																											Compoundier-
																											und
																											Extrusionsverhalten
																											erfolgt.
																		
			
				
																						The
																											known
																											silicas
																											are
																											precipitated
																											silicas
																											with
																											a
																											normal
																											structure
																											processed
																											to
																											battery
																											separator
																											films
																											according
																											to
																											a
																											conventional
																											standard
																											recipe
																											by
																											the
																											compounding-extrusion
																											process.
																											SUMMARY
																											OF
																											THE
																											INVENTION
															 
				
		 EuroPat v2
			
																						Aus
																											dem
																											Diagramm
																											läßt
																											sich
																											ablesen,
																											daß
																											eine
																											offenzellige
																											Struktur
																											des
																											Polystyrolschaumes
																											entweder
																											durch
																											entsprechende
																											Erhöhung
																											der
																											Austrittstemperatur
																											der
																											Polystyrolschmelze
																											an
																											der
																											ringförmigen
																											Extrusionsdüse
																											erzielen
																											läßt
																											oder
																											durch
																											Zugabe
																											eines
																											Fremd-Polymers
																											zu
																											der
																											Standardrezeptur
																											des
																											Polystyrolschaumes
																											im
																											üblichen
																											Temperaturbereich
																											von
																											140
																											bis
																											150
																											°C,
																											insbesondere
																											150
																											°C.
																		
			
				
																						The
																											graph
																											shows
																											that
																											an
																											open-cell
																											structure
																											of
																											the
																											polystyrene
																											foam
																											according
																											to
																											the
																											present
																											invention
																											can
																											be
																											achieved
																											either
																											by
																											appropriately
																											increasing
																											the
																											outlet
																											temperature
																											of
																											the
																											polystyrene
																											melt
																											at
																											the
																											annular
																											extrusion
																											die
																											or
																											by
																											adding
																											a
																											foreign
																											polymer
																											to
																											the
																											standard
																											formulation
																											of
																											the
																											polystyrene
																											foam
																											in
																											the
																											usual
																											temperature
																											range
																											from
																											about
																											140°
																											to
																											150°
																											C.,
																											in
																											particular
																											about
																											150°
																											C.
															 
				
		 EuroPat v2
			
																						Die
																											Wirkung
																											des
																											erfindungsgemässen
																											Silans
																											gemäss
																											Formel
																											(1),
																											Cyclopentadienylpropyltriethoxisilan,
																											wird
																											in
																											einer
																											Standardrezeptur
																											aus
																											Basis
																											chloriertem
																											Polyäthylen
																											untersucht.
																		
			
				
																						The
																											effect
																											of
																											cyclopentadienylpropyltriethoxysilane,
																											a
																											silane
																											of
																											the
																											invention
																											within
																											formula
																											(I)
																											was
																											investigated
																											in
																											a
																											standard
																											recipe
																											based
																											on
																											chlorinated
																											polyethylene.
															 
				
		 EuroPat v2
			
																						Im
																											Vergleich
																											zur
																											Standardrezeptur
																											(Kreis)
																											sinkt
																											der
																											MFR-Wert
																											der
																											Formulierung
																											mit
																											42
																											Gew.%
																											Stärke
																											und
																											0,5
																											Gew.%
																											Glycidyl-Additiv
																											auf
																											weniger
																											als
																											ein
																											Fünftel
																											ab
																											(Dreieck),
																											ein
																											Zeichen
																											für
																											umfangreiche
																											Vernetzung
																											der
																											enthaltenen
																											Polymere.
																		
			
				
																						In
																											comparison
																											to
																											the
																											standard
																											composition
																											(circle)
																											the
																											MFR
																											value
																											of
																											the
																											formulation
																											with
																											42
																											wt.
																											%
																											starch
																											and
																											0.5
																											wt.
																											%
																											glycidyl
																											additive
																											falls
																											to
																											less
																											than
																											a
																											fifth
																											(triangle),
																											an
																											indication
																											of
																											extensive
																											cross-linking
																											of
																											the
																											contained
																											polymers.
															 
				
		 EuroPat v2
			
																						Während
																											die
																											Dart-Drop-Werte
																											für
																											die
																											Standardrezeptur
																											ohne
																											Glycidyl-Additiv
																											und
																											die
																											modifizierte
																											Rezeptur
																											auf
																											gleichem
																											Niveau
																											liegen,
																											bewirkt
																											das
																											Glycidyl-Additiv
																											eine
																											MFR-Absenkung
																											auf
																											weniger
																											als
																											die
																											Hälfte
																											des
																											Standardwertes.
																		
			
				
																						While
																											the
																											dart
																											drop
																											values
																											are
																											at
																											the
																											same
																											level
																											for
																											the
																											standard
																											composition
																											without
																											glycidyl
																											additive
																											and
																											for
																											the
																											modified
																											composition,
																											the
																											glycidyl
																											additive
																											brings
																											about
																											a
																											fall
																											in
																											the
																											MFR
																											to
																											less
																											than
																											half
																											of
																											the
																											standard
																											value.
															 
				
		 EuroPat v2
			
																						Als
																											Standardrezeptur
																											wurde
																											ausgehend
																											von
																											einer
																											Rezeptur
																											gemäß
																											der
																											US
																											3
																											859
																											421
																											A
																											eine
																											Zusammensetzung,
																											bestehend
																											aus
																											90
																											ml
																											Furfurylalkohol
																											(>
																											98
																											%),
																											18
																											ml
																											Pyrrol
																											(?97%),
																											45
																											ml
																											Polyethylenglykolmethylether
																											750
																											und
																											3
																											ml
																											konzentrierter
																											HNO
																											3,
																											als
																											Katalysator
																											entwickelt.
																		
			
				
																						A
																											standard
																											formulation
																											was
																											developed,
																											from
																											a
																											formulation
																											as
																											per
																											U.S.
																											Pat.
																											No.
																											3,859,421
																											A,
																											in
																											the
																											form
																											of
																											a
																											composition
																											consisting
																											of
																											90
																											ml
																											of
																											furfuryl
																											alcohol
																											(>98%),
																											18
																											ml
																											of
																											pyrrole
																											(?97%),
																											45
																											ml
																											of
																											polyethylene
																											glycol
																											methyl
																											ether
																											750
																											and
																											3
																											ml
																											of
																											concentrated
																											HNO
																											3
																											as
																											catalyst.
															 
				
		 EuroPat v2
			
																						Mischungen
																											dieses
																											Methacrylats
																											mit
																											Triethylenglykoldimethacrylat
																											(TEGDMA)
																											dienen
																											auch
																											heute
																											noch
																											als
																											Standardrezeptur
																											für
																											dentale
																											plastische
																											Direkt-Füllungswerkstoffe.
																		
			
				
																						Mixtures
																											of
																											this
																											methacrylate
																											with
																											triethyleneglycol
																											dimethacrylate
																											(TEGDMA)
																											still
																											serve
																											as
																											the
																											standard
																											recipe
																											for
																											dental
																											plastic
																											direct-filling
																											materials.
															 
				
		 EuroPat v2
			
																						In
																											einem
																											weiteren
																											Fall
																											wurde
																											den
																											Harzanteil
																											in
																											der
																											Rezeptur
																											gegenüber
																											der
																											Standardrezeptur
																											um
																											20
																											Gew-%
																											abgesenkt.
																		
			
				
																						In
																											another
																											case,
																											the
																											resin
																											content
																											in
																											the
																											formulation
																											was
																											decreased
																											by
																											20%
																											by
																											weight
																											as
																											compared
																											to
																											the
																											standard
																											formulation.
															 
				
		 EuroPat v2
			
																						Im
																											vorliegenden
																											Fall
																											wird
																											also
																											eine
																											Standardrezeptur
																											so
																											ausgerüstet,
																											dass
																											50%
																											des
																											in
																											der
																											Rezeptur
																											enthaltenen
																											Bindemittels
																											ausgetauscht
																											werden.
																		
			
				
																						Thus,
																											in
																											the
																											present
																											case,
																											a
																											standard
																											formulation
																											is
																											adjusted
																											by
																											changing
																											50%
																											of
																											the
																											binder
																											contained
																											in
																											the
																											formulation.
															 
				
		 EuroPat v2
			
																						Bedingt
																											durch
																											die
																											Notwendigkeit,
																											dass
																											eine
																											gecoatete
																											Calciumcarbonatslurry
																											als
																											Basis
																											für
																											die
																											Versuche
																											genommen
																											wird,
																											wird
																											dann
																											analog
																											hierzu
																											der
																											Feststoffanteil
																											des
																											Claciumcarbonats
																											in
																											der
																											Standardrezeptur
																											herangezogen
																											und
																											in
																											der
																											Vergleichsrezeptur
																											so
																											modifiziert,
																											dass
																											die
																											bisher
																											trocken
																											in
																											die
																											Dispersion
																											eingebrachten
																											Füllstoffe
																											adäquat
																											durch
																											die
																											gleiche
																											Menge
																											auf
																											Feststoff
																											gerechnete
																											Slurry
																											eingesetzt
																											werden.
																		
			
				
																						Due
																											to
																											the
																											necessity
																											that
																											a
																											coated
																											calcium
																											carbonate
																											slurry
																											is
																											taken
																											as
																											the
																											basis
																											for
																											the
																											experiments,
																											by
																											analogy,
																											the
																											solids
																											content
																											of
																											the
																											calcium
																											carbonate
																											in
																											the
																											standard
																											formulation
																											is
																											recurred
																											to
																											and
																											modified
																											in
																											the
																											comparative
																											formulation
																											in
																											such
																											a
																											way
																											that
																											the
																											fillers
																											which
																											had
																											previously
																											been
																											added
																											dry
																											to
																											the
																											dispersion
																											are
																											adequately
																											replaced
																											by
																											the
																											same
																											amount
																											of
																											slurry
																											calculated
																											as
																											solids.
															 
				
		 EuroPat v2
			
																						Die
																											Herstellung
																											der
																											im
																											Folgenden
																											für
																											die
																											Vergleichsuntersuchungen
																											eingesetzten
																											Halbedelkorunde
																											erfolgte
																											nach
																											einer
																											Standardrezeptur
																											gemäß
																											dem
																											Stand
																											der
																											Technik,
																											die
																											bewusst
																											den
																											späteren
																											Anforderungen
																											an
																											eine
																											Produktion
																											angepasst
																											wurde,
																											so
																											dass
																											auch
																											Rückläufe
																											und
																											Abfälle
																											aus
																											Vorproduktionen
																											eingesetzt
																											wurden.
																		
			
				
																						The
																											production
																											of
																											the
																											semi-friable
																											corundums,
																											which
																											are
																											used
																											below
																											for
																											the
																											comparative
																											studies,
																											took
																											place
																											according
																											to
																											a
																											standard
																											recipe
																											according
																											to
																											the
																											state
																											of
																											the
																											art,
																											which
																											was
																											intentionally
																											adapted
																											to
																											the
																											subsequent
																											demands
																											on
																											a
																											production,
																											so
																											that
																											returns
																											and
																											waste
																											from
																											pre-productions
																											were
																											also
																											used.
															 
				
		 EuroPat v2