Übersetzung für "Vorgaben des auftraggebers" in Englisch

Oftentimes, the music is produced and owned by production music libraries.

Every Steel system is built as a one-off in accordance with customer preferences.

The film cutting is carried out based on the client directives.

The technical specifications should be clearly indicated, so that all tenders know what the requirements established by the contracting authority cover.

These regional service locations are coordinated centrally by the SPoC, thereby ensuring the highest possible quality and compliance with the customer’s technical requirements.

Once the project work was finished, the plan layout could easily be adapted to suit the client's and local requirements thanks to the flexible features of CARD/1.

The façade and module design was implemented with complete freedom of design, in accordance with the specifications of the client, Merck KGaA, incorporating the company's corporate identity, and with the involvement of the architects and designers.

My hourly fee depends on the level of difficulty, the situation of the company, furthermore specifications and wishes of the client.

In the case of exclusive transport compound feed (no transportation of raw materials, additives or premixes), minimum cleaning level changes from level forbidden to level A, completed by control measures in order to prevent interbatch transfers, taking into account the specific instructions given by the instructing party.

Due to automatic modeling of tree columns, crosses and leveling points in 3Din addition toautomatic drawing creation to contractor requirements wesaved 1.900 man-days.

The pile is assigned a specific identification according to the demands of the client (pile ID), who can use the calculated pile size (number and volume) as bases for selling and for comparison with factory gate measurements taken at the sawmill.

The technical conversion of the collected data will be done by modern computer equipment for the realization of expressive models and water simulations under various conditions following the customer's predicitions.

In the case of exclusive transport compound feed (no transportation of raw materials, additives or premixes), minimum cleaning level changes from level D to level A, completed by control measures in order to prevent interbatch transfers, taking into account the specific instructions given by the instructing party.

The tests were carried out in four loading cycles up to a maximum pressure of 100 bar according to the client's instructions.

Comprehensive and standardized testing conducted by systemgruppe as per the directions of the client, offers a broad range of applications

Our strengths are the ability to offer complete solutions and the project-specific fulfilment of all ordinances and regulations, taking into account the client’s requirements with regard to costs, equipment and design, as well as the preparation of a tailored high-level design for your project.

Claims on the part of the customer are furthermore excluded insofar as the infringement of protected rights is based on special instructions of the customer, through an application not foreseeable by OhmEx GmbH or is caused in that the customer modifies the product or using this together with a product not supplied by OhmEx GmbH.

Based on your specific requirements, we will develop a concept for method and content in which different interactive methods are modularly intertwined.

All tasks, which this process brings with itself, are taken over of tarama excon: After the defaults of the client an exact profile is prepared.

On Saturday, 8 March at 12:00 pm, all 48 residential connections in the rehabilitated collection drain were milled open again and promptly at the start of the tram traffic on Monday morning at 9:00 am they were all connected again according to the specifications of the client: This was accomplished with the installation of glass fibre short liners up to 50 centimetres over the first pipe connection in the connection.

The cold milling machines were equipped with a milling drum featuring a tool spacing of LA 8 – another client specification to ensure optimum interlocking of the new asphalt binder course with the milled surface.

In order to comply with the client’s demand for short cycles times, straightforward forming up and stripping procedures as well as economically optimised progress in construction, the formwork specialists devised a fully hydraulic tunnel forming carriage.

If the customer has created an own presentation suitable for publication and has sent it to the contractor, the contractor reserves the right to re-create, adapt or improve the submitted presentation after consultation with the customer and according to the customer's specifications, as far as it is required.

According to the specification of the customer and the applicable rules, the components are checked by visual inspection, non-destructive examination, magnetic particle testing, dye penetration testing, ultrasonic testing and X-ray.