Übersetzung für "Farbe auftragen" in Englisch

Before applying paint, degrease the skin with an alcohol solution.

Now you can apply varnish, wax or paint.

Shake or stir the paint thoroughly to be certain of an absolute mix.

Clean the surface to be painted, apply paint, and leave to dry briefly.

Ease of application: how easy is the color and pattern to transfer?

Now it is possible to put the first paint coat.

With the applicator the color can be applied precisely.

First apply the paint and let it dry, then apply the sealant over it. Voilà finished.

Applying make-up means applying color with highest accuracy.

Due to the soft texture, the pencil is easy to apply.

Spraygun simply put on the paint and spray.

You should draw nothing. You only use a cliche on which apply a layer of color necessary to you.

The area will be circled and enlarged so that you can apply the color easily.

For an especially matt finish with powdery lip contours, lightly dab the colour after application.

With the applicator – which is similar to a lip gloss applicator – the liquid color can be applied easily.

For more lip shimmer or a slightly softer color, apply RMS Beauty Living Luminizer over the chosen Lip2Cheek color.

In order to apply a lot of colour the paper therefore needs a certain surface structure.

It needs to be put approximately from the middle of the site painted in the first color.

Before each new print it is necessary to apply a new paint coat on a ball.

These compositions can be caused to be deposited on to a metal surface by polarising said metal surface, either anodically or cathodically relative to another electrode, according to the type of paint used.

Screen printing has the disadvantage that after the application of one color and before the application of the next color, resulting in a mixed color, the color applied first has to be completely dried (tempered) in a through oven, in order to be able to apply the next color without running.

If the colour is applied by means of an airspray gun, the colour is used in the present form; if the colour is to be applied by plushing, the liquor of the colour finish is first diluted with water in a ratio of 2:1; while if the colour is to be applied by means of a casting machine or an airless gun, the liquor is adjusted with a suitable thickening agent to a viscosity which corresponds to an efflux time of 16 to 28 seconds from a Ford cup having a 4-mm nozzle.

You got red shorts, a white shirt, red glasses, yellow make-up or paint suited for the skin and blue color for the hair somewhere? Take a...

It is important to let the paint dry completely after application and for a better grip I recommend to apply a primer before.

Then he must recarve the second image into the remainder of the same block, apply the second color and print over the impressions of the first step.

Now you can apply the new color immediately, let it dry for a minute under the UV lamp and the new nail styling is done.

Are thus applied porolonovye platens with which help on a wall put a paint necessary kolera.

The paint according to claim 1, wherein the water is present as at least 33 weight percent of the total weight of the paint and wherein the pigment is present at a maximum of 25 weight percent of the total weight of the paint, wherein the weight ratio of the pigment to the water is at a maximum of 0.75.

In this way the effect can be achieved for example that the mascara is heated before application, and so changes its properties or its state of aggregation or its viscosity (hard or viscous in the cold state, liquid in the warm state).

If you’d like to wear make-up during a Zumba class, for instance, you should consider a hydrating foundation whit a touch of colour.