Übersetzung für "Lösung angesetzt" in Englisch
																						Als
																											Entschichtungsbad
																											wurde
																											folgende
																											Lösung
																											angesetzt:
																		
			
				
																						The
																											following
																											solution
																											was
																											used
																											as
																											the
																											layer
																											separation
																											bath:
															 
				
		 EuroPat v2
			
																						Das
																											Silbernitrat
																											wurde
																											als
																											3,5
																											molare
																											Lösung
																											und
																											die
																											Ascorbinsäure
																											als
																											1,7
																											molare
																											Lösung
																											angesetzt.
																		
			
				
																						The
																											silver
																											nitrate
																											was
																											made
																											up
																											as
																											a
																											3.5
																											molar
																											solution
																											and
																											the
																											ascorbic
																											acid
																											as
																											a
																											1.7
																											molar
																											solution.
															 
				
		 EuroPat v2
			
																						Nach
																											dieser
																											Zeit
																											wird
																											eine
																											frisch
																											angesetzt
																											Lösung
																											von
																											4
																											mg/mi
																											NaBH
																											4
																											im
																											Verhältnis
																											1/20
																											(V/V)
																											zugegeben
																											und
																											erneut
																											2
																											Stunden'bei
																											4°C
																											inkubiert.
																		
			
				
																						Thereafter
																											a
																											freshly
																											prepared
																											solution
																											of
																											4
																											mg/ml
																											Na
																											BH4
																											in
																											the
																											ratio
																											1/20
																											(V/V)
																											is
																											added
																											and
																											it
																											is
																											again
																											incubated
																											at
																											4°
																											C.
																											for
																											2
																											hours.
															 
				
		 EuroPat v2
			
																						In
																											einem
																											18
																											m
																											3
																											fassenden
																											Badbehälter
																											wurde
																											eine
																											Lösung
																											zur
																											Kaltimprägnierung
																											angesetzt,
																											die
																											2
																											g/1
																											Nickel
																											und
																											1,4
																											g/1
																											Fluorid
																											enthielt.
																		
			
				
																						A
																											solution
																											for
																											use
																											in
																											cold
																											impregnating
																											was
																											prepared
																											in
																											a
																											bath
																											container
																											having
																											a
																											capacity
																											of
																											18
																											m3
																											which
																											solution
																											contained
																											2
																											g/l
																											of
																											nickel
																											and
																											1.4
																											g/l
																											of
																											fluoride.
															 
				
		 EuroPat v2
			
																						Eine
																											Weiterbildung
																											ist
																											dadurch
																											gekennzeichnet,
																											daß
																											Mikroorganismen,
																											die
																											ihren
																											Stickstoffbedarf
																											durch
																											Nitrat-
																											und
																											Nitritabbau
																											decken
																											können,
																											auf
																											die
																											abgetrennte
																											Lösung
																											angesetzt
																											werden,
																											welche
																											Lösung
																											mit
																											einer
																											Kohlenstoffquelle
																											in
																											einer
																											Konzentration
																											von
																											je
																											16,5±10
																											assimilierbaren
																											Kohlenstoffatomen
																											auf
																											je
																											ein
																											Nitratmolekül
																											und
																											weiteren
																											außer
																											Stickstoff
																											erforderlichen
																											Nährstoffen
																											angereichert
																											ist
																											und
																											bei
																											der
																											Assimilation
																											mit
																											0,5
																											bis
																											2,5
																											1
																											-
																											1-
																											1
																											-
																											min
																											-1
																											belüftet
																											und
																											in
																											dem
																											pH-Bereich
																											von
																											3,5
																											bis
																											6
																											und
																											in
																											dem
																											Temperaturbereich
																											von
																											25°C
																											bis
																											37°C
																											gehalten
																											wird,
																											und
																											daß
																											die
																											Assimilation
																											so
																											lange
																											durchgeführt
																											wird,
																											bis
																											der
																											Nitratgehalt
																											auf
																											einen
																											Maximalgehalt
																											von
																											10
																											ppm
																											reduziert
																											ist.
																		
			
				
																						During
																											assimilation,
																											the
																											solution
																											is
																											enriched
																											by
																											the
																											use
																											of
																											a
																											carbon
																											source
																											to
																											a
																											concentration
																											of
																											16.5.+-.10
																											assimilative
																											carbon
																											atoms
																											per
																											nitrate
																											molecule
																											and
																											by
																											necessary
																											nutrients,
																											other
																											than
																											nitrogen,
																											while
																											being
																											aerated
																											at
																											a
																											rate
																											of
																											0.5
																											to
																											2.5
																											l×1-1
																											×min-1
																											and
																											maintained
																											at
																											pH
																											values
																											between
																											3.5
																											and
																											6
																											and
																											at
																											temperatures
																											between
																											25°
																											C.
																											and
																											37°
																											C.
																											Assimilation
																											in
																											such
																											a
																											manner
																											is
																											usually
																											maintained
																											until
																											the
																											nitrate
																											content
																											of
																											the
																											tobacco
																											extract
																											is
																											reduced
																											to
																											a
																											maximum
																											of
																											10
																											ppm.
															 
				
		 EuroPat v2
			
																						Die
																											alkalische
																											Methanol-Wasser-Lösung
																											wird
																											angesetzt
																											aus
																											400
																											ml
																											demineralisiertem
																											Wasser,
																											600
																											ml
																											Methanol
																											und
																											3,4
																											ml
																											25
																											%igem
																											Ammoniak.
																		
			
				
																						The
																											alkaline
																											methanol-water
																											solution
																											is
																											prepared
																											from
																											400
																											ml
																											demineralized
																											water,
																											600
																											ml
																											methanol
																											and
																											3.4
																											ml
																											ammonia
																											solution
																											(25%).
															 
				
		 EuroPat v2
			
																						Das
																											COC
																											aus
																											Beispiel
																											3
																											wurde
																											als
																											0,5,
																											5
																											und
																											10
																											Gew.-%ige
																											Lösung
																											in
																											Decalin
																											angesetzt
																											und
																											über
																											Nacht
																											unter
																											Rühren
																											gelöst.
																		
			
				
																						The
																											COC
																											from
																											Example
																											3
																											was
																											made
																											up
																											as
																											a
																											0.5%,
																											5%
																											and
																											10%
																											by
																											weight
																											strength
																											solution
																											in
																											decalin
																											and
																											dissolution
																											was
																											completed
																											overnight
																											with
																											stirring.
															 
				
		 EuroPat v2
			
																						Die
																											Phenylessigsäure
																											wurde
																											als
																											25
																											%ige
																											Lösung
																											angesetzt,
																											mit
																											NaOH
																											auf
																											pH
																											7
																											titriert,
																											autoklaviert
																											und
																											zu
																											dem
																											separat
																											angesetzten
																											Medium
																											zugegeben.
																		
			
				
																						The
																											phenylacetic
																											acid
																											was
																											made
																											up
																											into
																											a
																											25%
																											strength
																											solution,
																											titrated
																											to
																											pH
																											7
																											with
																											NaOH,
																											autoclaved
																											and
																											added
																											to
																											the
																											medium
																											which
																											had
																											been
																											made
																											up
																											separately.
															 
				
		 EuroPat v2
			
																						Die
																											erfindungsgemäßen
																											desinfizierenden
																											Mittel
																											wurden
																											jeweils
																											in
																											den
																											beschriebenen
																											Zusammensetzungen
																											aus
																											Metallsalz,
																											Vitamin
																											und
																											Tenside
																											zusammengerührt
																											und
																											als
																											wässrige
																											Lösung
																											angesetzt.
																		
			
				
																						The
																											disinfectants
																											according
																											to
																											the
																											invention
																											were
																											composed
																											each
																											time
																											in
																											the
																											described
																											compositions
																											of
																											metal
																											salt,
																											vitamin
																											and
																											surfactant
																											and
																											prepared
																											as
																											an
																											aqueous
																											solution.
															 
				
		 EuroPat v2
			
																						Wenn
																											das
																											Konzentrat
																											mit
																											üblichem
																											Leitungswasser
																											zu
																											einer
																											gebrauchsfertigen
																											Lösung
																											angesetzt
																											wird,
																											können
																											sich
																											je
																											nach
																											Beschaffenheit
																											dieses
																											Wassers
																											geringfügig
																											abweichende
																											pH-Werte
																											ergeben.
																		
			
				
																						If
																											the
																											concentrate
																											is
																											made
																											up
																											with
																											customary
																											mains
																											water
																											into
																											a
																											ready-to-use
																											solution,
																											there
																											may
																											be
																											slight
																											deviations
																											in
																											pH
																											values
																											depending
																											on
																											the
																											nature
																											of
																											that
																											water.
															 
				
		 EuroPat v2
			
																						Wie
																											unten
																											in
																											den
																											Beispielen
																											noch
																											erläutert
																											werden
																											wird,
																											kann
																											beispielsweise
																											eine
																											im
																											Volumenverhältnis
																											eins
																											zu
																											eins
																											hergestellte
																											Mischung
																											von
																											zwei
																											erfindungsgemäßen
																											Komponenten
																											des
																											Kits
																											als
																											0,2
																											%ige
																											wässrige
																											Lösung
																											angesetzt
																											werden
																											und
																											hat
																											eine
																											gute
																											Wirksamkeit
																											gegenüber
																											den
																											üblichen
																											Mischverschmutzungen
																											chirurgischer
																											Instrumente.
																		
			
				
																						As
																											will
																											be
																											elucidated
																											further
																											below
																											in
																											the
																											examples,
																											a
																											mixture,
																											prepared
																											in
																											a
																											volume
																											ratio
																											of
																											one
																											to
																											one,
																											of
																											two
																											components
																											of
																											the
																											kit
																											according
																											to
																											the
																											invention,
																											for
																											example,
																											can
																											be
																											made
																											up
																											as
																											a
																											0.2%
																											strength
																											aqueous
																											solution
																											and
																											has
																											effective
																											activity
																											with
																											respect
																											to
																											the
																											customary
																											mixed
																											forms
																											of
																											soiling
																											on
																											surgical
																											instruments.
															 
				
		 EuroPat v2
			
																						Zunächst
																											wurde
																											eine
																											BR/HSA-Lösung
																											so
																											angesetzt,
																											daß
																											nach
																											Zuführung
																											des
																											Füllvolumens
																											der
																											Adsorberkartusche
																											110
																											eine
																											BR-Konzentration
																											von
																											15
																											mg/dl
																											und
																											eine
																											HSA-Konzentration
																											von
																											30
																											g/l
																											erreicht
																											wurde.
																		
			
				
																						BR/HSA
																											solution
																											was
																											first
																											prepared
																											such
																											that,
																											after
																											supply
																											of
																											the
																											filling
																											volume
																											of
																											the
																											adsorber
																											cartridge
																											110,
																											a
																											BR
																											concentration
																											of
																											15
																											mg/dl
																											and
																											an
																											HSA
																											concentration
																											of
																											30
																											g/l
																											were
																											reached.
															 
				
		 EuroPat v2
			
																						Dieses
																											Konzentrat
																											wird
																											vorzugsweise
																											in
																											Konzentrationen
																											von
																											0,5
																											bis
																											5,
																											vorzugsweise
																											0,5
																											bis
																											2,
																											besonders
																											bevorzugt
																											0,5
																											bis
																											1,5
																											Vol.-%
																											mit
																											Wasser
																											zu
																											einer
																											gebrauchsfertigen
																											Lösung
																											angesetzt.
																		
			
				
																						This
																											concentrate
																											is
																											preferably
																											made
																											up
																											at
																											concentrations
																											of
																											0.5
																											to
																											5,
																											preferably
																											0.5
																											to
																											2,
																											particularly
																											preferably
																											0.5
																											to
																											1.5,
																											percent
																											by
																											volume
																											with
																											water
																											to
																											give
																											a
																											ready-to-use
																											solution.
															 
				
		 EuroPat v2
			
																						Der
																											NTA-Zusatz
																											ist
																											vorteilhaft,
																											wenn
																											das
																											Konzentrat
																											mit
																											stark
																											mineralstoffhaltigem
																											(hartem)
																											Wasser
																											zu
																											einer
																											gebrauchsfertigen
																											Lösung
																											angesetzt
																											werden
																											soll.
																		
			
				
																						The
																											addition
																											of
																											NTA
																											is
																											advantageous
																											if
																											the
																											concentrate
																											is
																											to
																											be
																											made
																											up
																											with
																											water
																											having
																											high
																											mineral
																											contents
																											(hard
																											water)
																											to
																											give
																											a
																											ready-to-use
																											solution.
															 
				
		 EuroPat v2
			
																						Die
																											Messung
																											erfolgt
																											in
																											einer
																											1
																											%
																											AMP
																											90-Lösung
																											(angesetzt
																											mit
																											Reinstwasser
																											/
																											AMP
																											90
																											ist
																											2-Amino-2-methyl-1-propanol-Lösung
																											der
																											Firma
																											Angus
																											Chemie).
																		
			
				
																						Measurement
																											is
																											performed
																											in
																											a
																											1%
																											AMP
																											90
																											solution
																											(prepared
																											with
																											ultrapure
																											water;
																											AMP
																											90
																											is
																											a
																											2-amino-2-methyl-1-propanol
																											solution
																											from
																											Angus
																											Chemie).
															 
				
		 EuroPat v2
			
																						Die
																											Deckgläser
																											werden
																											zum
																											Trocknen
																											bei
																											Raumtemperatur
																											aus
																											den
																											6-wells
																											heraus
																											genommen
																											und
																											anschließend
																											in
																											neuen
																											6-wells
																											mit
																											je
																											3ml
																											0,01
																											%ige
																											SafraninO
																											-Lösung
																											(angesetzt
																											mit
																											sterilem
																											Wasser)
																											15
																											Minuten
																											angefärbt.
																		
			
				
																						The
																											slide
																											glasses
																											are
																											taken
																											out
																											of
																											the
																											6-positions
																											to
																											be
																											dried
																											at
																											room
																											temperature
																											and
																											then
																											dyed
																											in
																											new
																											6-positions
																											with
																											3
																											ml
																											0.01%
																											SafraninO-solution
																											(made
																											up
																											in
																											sterile
																											water)
																											for
																											15
																											minutes.
															 
				
		 EuroPat v2
			
																						Die
																											drei
																											vorstehend
																											angesetzten
																											Lösungen
																											werden
																											in
																											einem
																											2l-Erlenmeyerkolben
																											zusammengegeben.
																		
			
				
																						The
																											three
																											solutions
																											made
																											up
																											above
																											are
																											mixed
																											in
																											a
																											2
																											l
																											Erlenmeyer
																											flask.
															 
				
		 EuroPat v2
			
																						Alle
																											Lösungen
																											werden
																											frisch
																											angesetzt
																											und
																											auf
																											0
																											°C
																											gekühlt.
																		
			
				
																						All
																											the
																											solutions
																											are
																											made
																											up
																											freshly
																											and
																											cooled
																											to
																											0°
																											C.
															 
				
		 EuroPat v2
			
																						Verwendung
																											finden
																											frisch
																											angesetzte
																											Losungen
																											der
																											Prüfsubstanz.
																		
			
				
																						Freshly
																											prepared
																											solutions
																											of
																											the
																											test
																											compound
																											are
																											employed.
															 
				
		 EUbookshop v2
			
																						Gewöhnlich
																											finden
																											frisch
																											angesetzte
																											Lösungen
																											der
																											Prüfsubstanz
																											Verwendung.
																		
			
				
																						Normally,
																											freshly
																											prepared
																											solutions
																											of
																											the
																											test
																											compound
																											are
																											employed.
															 
				
		 EUbookshop v2
			
																						Um
																											die
																											Zugabe
																											des
																											Peroxids
																											zu
																											vereinfachen
																											wurden
																											Silan/Peroxid-Lösungen
																											angesetzt.
																		
			
				
																						To
																											simplify
																											the
																											addition
																											of
																											the
																											peroxide,
																											silane/peroxide
																											solutions
																											were
																											prepared.
															 
				
		 EuroPat v2
			
																						Es
																											wurden
																											folgende
																											Lösungen
																											angesetzt
																											(siehe
																											Tabelle
																											3):
																		
			
				
																						The
																											following
																											solutions
																											were
																											prepared
																											(see
																											Table
																											3):
															 
				
		 EuroPat v2
			
																						Um
																											die
																											Zugabe
																											des
																											Peroxides
																											zu
																											vereinfachen
																											wurden
																											Silan/Peroxid-Lösungen
																											angesetzt.
																		
			
				
																						In
																											order
																											to
																											simplify
																											the
																											addition
																											of
																											the
																											peroxide,
																											silane/peroxide
																											solutions
																											were
																											prepared.
															 
				
		 EuroPat v2
			
																						Der
																											pH-Wert
																											wurde
																											jeweils
																											bei
																											frisch
																											angesetzter
																											Lösung
																											und
																											nach
																											6%iger
																											Beladung
																											bestimmt.
																		
			
				
																						The
																											pH
																											value
																											was
																											measured
																											in
																											each
																											case
																											on
																											freshly
																											added
																											solution
																											and
																											after
																											a
																											6%
																											load.
															 
				
		 EuroPat v2
			
																						Es
																											wurden
																											in
																											separaten
																											Rührkesseln
																											folgende
																											Lösungen
																											angesetzt:
																		
			
				
																						The
																											following
																											solutions
																											were
																											made
																											up
																											in
																											separate
																											stirred
																											tanks:
															 
				
		 EuroPat v2
			
																						Die
																											fertig
																											angesetzte
																											Lösung
																											wurde
																											behandelt,
																											getrocknet
																											und
																											analysiert
																											wie
																											in
																											Beispiel
																											8
																											beschrieben.
																		
			
				
																						The
																											finished
																											solution
																											was
																											treated,
																											dried
																											and
																											analysed
																											as
																											described
																											in
																											example
																											8.
															 
				
		 EuroPat v2
			
																						Eine
																											entsprechend
																											angesetzte
																											Lösung
																											wird
																											in
																											einem
																											Reagenzglas/Becherglas
																											erwärmt
																											bis
																											eine
																											deutliche
																											Trübung
																											eintritt.
																		
			
				
																						A
																											solution
																											made
																											up
																											in
																											this
																											way
																											is
																											heated
																											in
																											a
																											test
																											tube/beaker
																											until
																											distinct
																											cloudiness
																											occurs.
															 
				
		 EuroPat v2
			
																						Dabei
																											sind
																											frisch
																											angesetzte
																											Lösungen
																											zu
																											verwenden,
																											da
																											CMP
																											in
																											8
																											%iger
																											Trichloressigsäure
																											bei
																											Raumtemperatur
																											abgebaut
																											wird.
																		
			
				
																						Use
																											freshly
																											prepared
																											solutions,
																											because
																											CMP
																											degrades
																											in
																											an
																											8
																											%
																											trichloroacetic
																											acid
																											environment
																											at
																											room
																											temperature.
															 
				
		 DGT v2019
			
																						Es
																											wurden
																											vier
																											verschiedene
																											Lösungen
																											1
																											angesetzt
																											und
																											mit
																											Hilfe
																											einer
																											nicht
																											dargestellten,
																											an
																											sich
																											bekannten
																											Auftragsvorrichtung
																											auf
																											eine
																											trockene
																											Trägerfolie
																											2
																											aus
																											Polyester
																											aufgebracht
																											und
																											durch
																											ein
																											Rakel
																											3
																											verteilt.
																		
			
				
																						Four
																											different
																											solutions
																											1
																											were
																											prepared
																											and
																											applied
																											with
																											an
																											applicator
																											as
																											known
																											per
																											se
																											and
																											not
																											shown
																											herein,
																											onto
																											a
																											dry
																											carrier
																											film
																											2
																											from
																											polyester
																											and
																											spread
																											thereon
																											by
																											means
																											of
																											a
																											squeegee
																											3.
															 
				
		 EuroPat v2
			
																						Die
																											klare
																											Katalysatorlösung
																											wird
																											dann
																											zu
																											einer
																											ebenfalls
																											unter
																											Argon
																											angesetzten
																											Lösung
																											der
																											a-Ketocarbonylverbindung
																											(40
																											mMol)
																											in
																											100
																											ml
																											Lösungsmittel
																											gegeben.
																		
			
				
																						The
																											clear
																											catalytic
																											solution
																											is
																											then
																											added
																											to
																											a
																											solution
																											of
																											the
																											a-ketocarbonyl
																											compound
																											(40
																											mmoles),
																											also
																											prepared
																											under
																											argon,
																											in
																											100
																											ml
																											solvent.
															 
				
		 EuroPat v2
			
																						Werden
																											ausgehend
																											von
																											einer
																											wäßrigen
																											Lösung
																											von
																											18
																											Gew.-%
																											Natriumlaurylethersulfat
																											10
																											Gew.-%
																											des
																											eingesetzten
																											Natriumlaurylethersulfates,
																											d.
																											h.
																											1,8
																											Gew.-Teile
																											durch
																											die
																											gleiche
																											Gewichtsmenge
																											Diglycerinmonopalmitat,
																											so
																											daß
																											die
																											angesetzte
																											Lösung
																											16,2
																											Gew.-%
																											Natriumlaurylethersulfat
																											und
																											1,8
																											Gew.-%
																											Diglycerinmonopalmitat
																											enthält,
																											so
																											ergibt
																											sich
																											eine
																											Viskosität
																											von
																											704
																											mPas
																											bei
																											einem
																											Natriumchloridgehalt
																											von
																											1,5
																											Gew.-%
																											und
																											7.320
																											mPas
																											bei
																											einem
																											Natriumchloridgehalt
																											von
																											9,0
																											Gew.-%.
																		
			
				
																						If,
																											starting
																											from
																											an
																											aqueous
																											solution
																											containing
																											18%
																											by
																											weight
																											of
																											sodium
																											lauryl
																											ether-sulfate,
																											10%
																											by
																											weight
																											of
																											the
																											sodium
																											lauryl
																											ether-sulfate
																											employed,
																											that
																											is
																											to
																											say
																											1.8
																											parts
																											by
																											weight,
																											are
																											replaced
																											by
																											the
																											same
																											amount
																											by
																											weight
																											of
																											diglycerol
																											monopalmitate,
																											so
																											that
																											the
																											solution
																											prepared
																											contains
																											16.2%
																											by
																											weight
																											of
																											sodium
																											lauryl
																											ether-sulfate
																											and
																											1.8%
																											by
																											weight
																											of
																											diglycerol
																											monopalmitate,
																											a
																											viscosity
																											of
																											704
																											mPas
																											results
																											at
																											a
																											sodium
																											chloride
																											content
																											of
																											1.5%
																											by
																											weight
																											and
																											a
																											viscosity
																											of
																											7,320
																											mPas
																											results
																											at
																											a
																											sodium
																											chloride
																											content
																											of
																											9.0%
																											by
																											weight.
															 
				
		 EuroPat v2
			
																						Diese
																											Latexbeizen
																											weisen
																											den
																											Vorteil
																											auf,
																											daß
																											sie
																											in
																											einfacher
																											Weise
																											mit
																											den
																											bekannten
																											Bindemitteln
																											zu
																											gießfertigen,
																											stabilen
																											Lösungen
																											angesetzt
																											werden
																											können.
																		
			
				
																						These
																											latex
																											mordants
																											have
																											the
																											advantage
																											that
																											they
																											can
																											simply
																											be
																											mixed
																											with
																											the
																											known
																											binding
																											agents
																											into
																											stable
																											solutions,
																											ready
																											for
																											casting.
															 
				
		 EuroPat v2
			
																						Die
																											angesetzte
																											Lösung
																											wurde
																											dem
																											Kraftstoff
																											in
																											einem
																											Verhältnis
																											zudosiert,
																											daß
																											pro
																											1
																											Liter
																											Kraftstoff
																											1,2
																											Millimol
																											an
																											Lithium
																											mit
																											dem
																											Metallsalz
																											zugegeben
																											wurden.
																		
			
				
																						The
																											prepared
																											solution
																											was
																											metered
																											into
																											the
																											fuel
																											at
																											such
																											a
																											ration
																											that
																											1.2
																											millimole
																											of
																											lithium
																											were
																											added
																											with
																											the
																											metal
																											salt
																											per
																											1
																											liter
																											of
																											fuel.
															 
				
		 EuroPat v2
			
																						Zur
																											Bestimmung
																											der
																											Lagerstabilität
																											wurden
																											in
																											regelmäßigen
																											Abständen
																											2
																											gew.-%ige
																											Lösungen
																											des
																											Produkts
																											angesetzt
																											und
																											gemessen
																											(D=
																											2,55
																											s-1,
																											Haake
																											Viscotester)
																		
			
				
																						To
																											determine
																											the
																											storage
																											stability,
																											2%
																											strength
																											by
																											weight
																											solutions
																											of
																											the
																											product
																											were
																											made
																											up
																											at
																											regular
																											intervals
																											and
																											the
																											viscosity
																											was
																											measured
																											(D=2.55
																											s
																											?1,
																											Haake
																											Viscotester)
															 
				
		 EuroPat v2
			
																						Dabei
																											wurden
																											unterschiedlich
																											konzentrierte
																											Lösungen
																											angesetzt
																											und
																											Lösungen
																											gleicher
																											Konzentration
																											mit
																											einem
																											Texture
																											Analyser
																											hinsichtlich
																											der
																											Festigkeit
																											untersucht.
																		
			
				
																						Solutions
																											of
																											different
																											concentrations
																											were
																											made
																											up,
																											and
																											solutions
																											of
																											the
																											same
																											concentration
																											were
																											tested
																											for
																											gel
																											solidity
																											in
																											a
																											texture
																											analyser.
															 
				
		 EuroPat v2