Übersetzung für "Quelle senke" in Englisch
																						Der
																											MPEG-Datenstrom
																											wird
																											von
																											der
																											Quelle
																											zur
																											Senke
																											zusammen
																											mit
																											den
																											Zeitmarken
																											übertragen.
																		
			
				
																						The
																											MPEG
																											data
																											stream
																											is
																											transmitted
																											from
																											the
																											data
																											source
																											to
																											the
																											data
																											sink
																											together
																											with
																											the
																											clock
																											references.
															 
				
		 EuroPat v2
			
																						Ein
																											Eintrag
																											dieser
																											Liste
																											besteht
																											aus
																											Quelle
																											und
																											Senke
																											der
																											Kommunikationsbeziehung.
																		
			
				
																						An
																											entry
																											of
																											this
																											list
																											comprises
																											the
																											source
																											and
																											drain
																											of
																											the
																											communication
																											relationship.
															 
				
		 EuroPat v2
			
																						Während
																											der
																											Energieübertragung
																											fließt
																											ein
																											Strom
																											von
																											der
																											Quelle
																											zur
																											Senke.
																		
			
				
																						During
																											the
																											transmission
																											of
																											energy
																											a
																											current
																											flows
																											from
																											the
																											source
																											to
																											the
																											drain.
															 
				
		 EuroPat v2
			
																						Das
																											Wärmenetz
																											kann
																											als
																											Quelle
																											und
																											Senke
																											arbeiten.
																		
			
				
																						The
																											heat
																											network
																											can
																											be
																											used
																											as
																											a
																											source
																											and
																											a
																											sink.
															 
				
		 ParaCrawl v7.1
			
																						Dazu
																											gehören
																											Quelle/
																											Senke,
																											Kontrollpunkte
																											und
																											die
																											Biegeradien.
																		
			
				
																						These
																											include
																											source/sink,
																											control
																											points
																											and
																											bend
																											radii.
															 
				
		 ParaCrawl v7.1
			
																						Auch
																											ist
																											unklar,
																											ob
																											Küstengebiete
																											eine
																											Quelle
																											oder
																											eine
																											Senke
																											für
																											Kohlendioxid
																											sind.
																		
			
				
																						It
																											is
																											also
																											unclear
																											whether
																											the
																											coastal
																											regions
																											are
																											a
																											source
																											or
																											sink
																											for
																											carbon
																											dioxide.
															 
				
		 ParaCrawl v7.1
			
																						Falls
																											keine
																											Request
																											vorliegt,
																											verkürzt
																											sich
																											die
																											Abfrage
																											der
																											Quelle
																											oder
																											Senke
																											auf
																											null
																											Takte.
																		
			
				
																						If
																											no
																											request
																											is
																											present,
																											the
																											query
																											of
																											the
																											source
																											or
																											sink
																											is
																											shortened
																											to
																											zero
																											cycles.
															 
				
		 EuroPat v2
			
																						Beispielsweise
																											kann
																											die
																											Rolle
																											umgeschaltet
																											werden,
																											indem
																											die
																											Kommunikation
																											als
																											Quelle
																											oder
																											Senke
																											eingerichtet
																											wird.
																		
			
				
																						For
																											example,
																											the
																											role
																											can
																											be
																											switched
																											in
																											that
																											communication
																											is
																											established
																											as
																											source
																											or
																											sink.
															 
				
		 EuroPat v2
			
																						Intern
																											handelt
																											es
																											sich
																											jedoch
																											auch
																											in
																											diesem
																											Fall
																											um
																											eine
																											Quelle
																											und
																											eine
																											Senke.
																		
			
				
																						Internally,
																											also
																											in
																											such
																											cases
																											a
																											source
																											and
																											a
																											sink
																											are
																											referred
																											to.
															 
				
		 ParaCrawl v7.1
			
																						Während
																											einer
																											Schreiboperation
																											wird
																											die
																											mit
																											dem
																											Gate
																											des
																											Transistors
																											verbundene
																											Wortleitung
																											erregt,
																											so
																											daß
																											der
																											Transistor
																											zwischen
																											Quelle
																											und
																											Senke
																											leitet.
																		
			
				
																						During
																											a
																											write
																											operation
																											the
																											word
																											line,
																											which
																											is
																											connected
																											to
																											the
																											gate
																											of
																											the
																											transistor,
																											is
																											energized
																											to
																											render
																											the
																											transistor
																											conductive
																											between
																											source
																											and
																											drain.
															 
				
		 EuroPat v2
			
																						Die
																											vorliegende
																											Erfindung
																											bezieht
																											sich
																											auf
																											einen
																											Feldeffekttransistor
																											mit
																											einem
																											Halbleitersubstrat
																											vom
																											ersten
																											Leitungstyp,
																											einer
																											Quelle
																											und
																											einer
																											Senke
																											vom
																											entgegengesstzten
																											Leitungstyp,
																											mit
																											einer
																											zwischen
																											Quelle
																											und
																											Senke
																											liegenden
																											Zone
																											des
																											entgegengesetzten
																											Leitungstyps,
																											die
																											schwächer
																											dotiert
																											ist
																											als
																											die
																											Quelle
																											und
																											Senke
																											und
																											die
																											von
																											einem
																											Bereich
																											umgeben
																											ist,
																											der
																											vom
																											ersten
																											Leitungstyp
																											und
																											höher
																											dotiert
																											ist
																											als
																											das
																											Substrat,
																											mit
																											einer
																											gegen
																											die
																											Oberfläche
																											des
																											Halbleitersubstrats
																											isolierten
																											Steuerelektrode,
																											die
																											die
																											genannte
																											Zone
																											auf
																											ihrer
																											gesamten
																											Breite
																											überdeckt,
																											wobei
																											der
																											zwischen
																											Steuerelektrode
																											und
																											Senke
																											liegende
																											Teil
																											der
																											genannten
																											Zone
																											eine
																											Driftstrecke
																											für
																											die
																											Ladungsträger
																											bildet.
																		
			
				
																						The
																											invention
																											relates
																											to
																											a
																											field
																											effect
																											transistor
																											having
																											a
																											semiconductor
																											substrate
																											of
																											a
																											first
																											conduction
																											type,
																											a
																											source
																											and
																											a
																											drain
																											of
																											a
																											conduction
																											type
																											opposite
																											the
																											first
																											conduction
																											type,
																											a
																											zone
																											of
																											the
																											opposite
																											conduction
																											type
																											disposed
																											between
																											the
																											source
																											and
																											the
																											drain
																											and
																											doped
																											more
																											weakly
																											than
																											the
																											source
																											and
																											the
																											drain,
																											the
																											zone
																											between
																											the
																											source
																											and
																											the
																											drain
																											being
																											surrounded
																											by
																											a
																											region
																											of
																											the
																											first
																											conduction
																											type
																											and
																											being
																											doped
																											more
																											heavily
																											than
																											the
																											substrate,
																											a
																											control
																											electrode
																											insulated
																											from
																											the
																											surface
																											of
																											the
																											semiconductor
																											substrate
																											and
																											covering
																											the
																											zone
																											between
																											the
																											source
																											and
																											the
																											drain
																											over
																											the
																											entire
																											width
																											thereof,
																											part
																											of
																											the
																											zone
																											lying
																											between
																											the
																											control
																											electrode
																											and
																											the
																											drain
																											forming
																											a
																											drift
																											section
																											or
																											path
																											for
																											charge
																											carriers.
															 
				
		 EuroPat v2
			
																						Für
																											die
																											Funktion
																											des
																											FET
																											ist
																											diese
																											Zone
																											10
																											nicht
																											unbedingt
																											erforderlich,
																											wenn
																											man
																											auf
																											eine
																											vollständige
																											Sperrung
																											des
																											zwischen
																											Quelle
																											4
																											und
																											Senke
																											5
																											liegenden
																											stromführenden
																											Kanals
																											verzichtet.
																		
			
				
																						This
																											zone
																											10
																											is
																											not
																											absolutely
																											necessary
																											for
																											the
																											FET
																											to
																											function,
																											if
																											complete
																											cut-off
																											of
																											the
																											current-carrying
																											channel
																											located
																											between
																											the
																											source
																											4
																											and
																											the
																											drain
																											5
																											is
																											dispensed
																											with.
															 
				
		 EuroPat v2
			
																						Wird
																											an
																											die
																											Elektroden
																											6
																											und
																											7
																											eine
																											Spannung
																											angelegt,
																											so
																											beginnt
																											abhängig
																											von
																											der
																											Größe
																											der
																											an
																											die
																											Steuerelektrode
																											9
																											gelegten
																											Steuerspannung
																											ein
																											Strom
																											von
																											der
																											Quelle
																											4
																											zur
																											Senke
																											5
																											zu
																											fließen.
																		
			
				
																						If
																											a
																											voltage
																											is
																											applied
																											to
																											the
																											electrodes
																											6
																											and
																											7,
																											a
																											current
																											begins
																											to
																											flow
																											from
																											the
																											source
																											4
																											to
																											the
																											drain
																											5,
																											dependent
																											upon
																											the
																											magnitude
																											of
																											the
																											control
																											voltage
																											applied
																											to
																											the
																											control
																											electrode
																											9.
															 
				
		 EuroPat v2
			
																						Die
																											Durchschaltung
																											eines
																											Verbindungsweges
																											zwischen
																											einer
																											Quelle
																											und
																											einer
																											Senke
																											kann
																											dezentral
																											in
																											den
																											Sende-
																											und
																											Empfangsgeräten
																											erfolgen,
																											indem
																											alle
																											ausgesendeten
																											Träger
																											über
																											das
																											gemeinsame
																											Lichtfrequenzkanalvielfach
																											nach
																											Art
																											eines
																											völlig
																											passiven
																											Knotens
																											an
																											alle
																											angeschlossenen
																											Empfangsgeräte
																											gelangen
																											und
																											dort
																											eine
																											Abstimmung
																											auf
																											den
																											betreffenden
																											Träger
																											vorgenommen
																											wird.
																		
			
				
																						The
																											switching
																											of
																											a
																											connection
																											path
																											between
																											a
																											source
																											and
																											a
																											sink
																											can
																											be
																											carried
																											out
																											in
																											a
																											decentralized
																											fashion
																											in
																											the
																											transmitter
																											and
																											receiver
																											devices,
																											in
																											that
																											all
																											the
																											carriers
																											transmitted
																											arrive
																											at
																											all
																											the
																											connected
																											receiver
																											devices
																											by
																											way
																											of
																											the
																											common
																											light
																											frequency
																											channel
																											multiplex
																											in
																											the
																											manner
																											of
																											a
																											completely
																											passive
																											node
																											and
																											tuning
																											to
																											the
																											appropriate
																											carrier
																											is
																											carried
																											out
																											at
																											the
																											receiver
																											device.
															 
				
		 EuroPat v2
			
																						Die
																											zur
																											Lösung
																											dieser
																											Erfindungsaufgabe
																											geschaffene
																											Vorrichtung
																											zum
																											Halten
																											von
																											empfindlichen
																											Werkstücken,
																											insbesondere
																											von
																											optischen
																											Linsen,
																											insbesondere
																											während
																											des
																											Transportes,
																											ist
																											gekennzeichnet
																											durch
																											eine
																											Membrane
																											aus
																											elastischem
																											Werkstoff,
																											die
																											eine
																											mit
																											dem
																											Werkstück
																											in
																											Eingriff
																											bringbare
																											umlaufende
																											Spannfläche
																											aufweist
																											und
																											mit
																											einem
																											Tragkörper
																											für
																											die
																											Membrane,
																											an
																											dem
																											diese
																											fluiddicht
																											so
																											eingespannt
																											ist,
																											dass
																											zwischen
																											Tragkörper
																											und
																											Membrane
																											eine
																											Kammer
																											besteht,
																											die
																											über
																											Kanäle
																											mit
																											einer
																											Quelle
																											und/oder
																											Senke
																											für
																											ein
																											Fluid,
																											insbesondere
																											für
																											ein
																											Druckgas,
																											insbesondere
																											für
																											Luft,
																											verbindbar
																											ist
																											und
																											dass
																											die
																											Membrane
																											durch
																											Änderung
																											des
																											Fluiddruckes
																											in
																											der
																											Kammerso
																											deformierbar
																											ist,
																											dass
																											die
																											Spannfläche
																											wahlweise
																											aufgeweitet
																											und
																											zusammengezogen
																											wird.
																		
			
				
																						The
																											inventive
																											device
																											for
																											holding
																											delicate
																											workpieces,
																											preferably
																											optical
																											lenses
																											during
																											transport
																											thereof,
																											is
																											characterized
																											by
																											a
																											membrane
																											of
																											an
																											elastic
																											material
																											which
																											has
																											an
																											annular
																											clamping
																											surface
																											which
																											can
																											engage
																											the
																											workpiece,
																											and
																											a
																											support
																											member
																											on
																											which
																											the
																											membrane
																											is
																											clamped
																											fluid-tight
																											in
																											a
																											manner
																											so
																											that
																											between
																											the
																											support
																											member
																											and
																											the
																											membrane
																											there
																											exists
																											a
																											chamber
																											which
																											can
																											be
																											connected
																											through
																											channels
																											with
																											a
																											pressure
																											source
																											and/or
																											a
																											vacuum
																											source
																											for
																											a
																											fluid,
																											preferably
																											a
																											pressurized
																											gas
																											such
																											as
																											air,
																											wherein
																											by
																											changing
																											the
																											fluid
																											pressure
																											in
																											the
																											chamber
																											the
																											membrane
																											is
																											deformed
																											so
																											that
																											the
																											clamping
																											surface
																											is
																											selectively
																											expanded
																											and
																											contracted.
															 
				
		 EuroPat v2
			
																						Sie
																											besitzen
																											ein
																											Dateiformat
																											(z.
																											B.
																											Bild,
																											Kontakt,
																											Notiz)
																											und
																											sind
																											entweder
																											eine
																											Quelle,
																											eine
																											Senke,
																											oder
																											beides.
																		
			
				
																						They
																											have
																											data
																											types,
																											such
																											as
																											image,
																											contact,
																											or
																											note,
																											and
																											are
																											also
																											defined
																											to
																											be
																											either
																											a
																											source,
																											a
																											sink,
																											or
																											both.
															 
				
		 WikiMatrix v1
			
																						Bei
																											einem
																											N-Kanal
																											FET,
																											wo
																											die
																											N-leitende
																											Quelle
																											und
																											Senke
																											in
																											einem
																											Substrat
																											mit
																											P-Leitfähigkeit
																											ausgebildet
																											sind,
																											kann
																											die
																											Schwellwertspannung
																											des
																											FET
																											durch
																											zusätzliche
																											Ionenimplantation
																											P-leitender
																											Dotierungsmittel
																											in
																											den
																											Kanalbereich
																											erhöht
																											werden.
																		
			
				
																						In
																											the
																											case
																											of
																											an
																											N-channel
																											FET
																											device,
																											where
																											the
																											source
																											and
																											drain
																											of
																											N-type
																											conductivity
																											are
																											formed
																											in
																											a
																											substrate
																											of
																											P-type
																											conductivity,
																											the
																											threshold
																											voltage
																											of
																											the
																											FET
																											device
																											may
																											be
																											increased
																											by
																											ion-implanting
																											additional
																											P-type
																											conductivity
																											dopants
																											into
																											the
																											channel
																											region.
															 
				
		 EuroPat v2
			
																						Die
																											Wärmeleitung
																											von
																											der
																											Quelle
																											zur
																											Senke
																											ist
																											ein
																											molekularer
																											Vorgang,
																											nämlich
																											die
																											Übertragung
																											von
																											Impuls
																											und
																											Energie
																											von
																											den
																											Molekeln
																											(oder
																											Atomen)
																											wärmerer
																											Körper
																											auf
																											die
																											Molekel
																											kälterer
																											Körper
																											(statistische
																											Thermodynamik).
																		
			
				
																						The
																											heat
																											conduction
																											from
																											the
																											heat
																											source
																											to
																											the
																											sink
																											is
																											a
																											molecular
																											process,
																											namely
																											the
																											transfer
																											of
																											pulse
																											and
																											energy
																											from
																											the
																											molecules
																											or
																											atoms
																											of
																											hotter
																											bodies
																											to
																											the
																											molecules
																											of
																											colder
																											bodies
																											(statistical
																											thermodynamics).
															 
				
		 EuroPat v2
			
																						Verfahren
																											nach
																											Anspruch
																											4,
																											bei
																											dem
																											in
																											einem
																											Transmissionsmode
																											festgelegt
																											wird,
																											in
																											welcher
																											Betriebsart
																											Quelle
																											und/oder
																											Senke
																											das
																											einem
																											Endpunktmodul
																											zugeordnete
																											Gerät
																											betrieben
																											wird.
																		
			
				
																						The
																											method
																											as
																											claimed
																											in
																											claim
																											4,
																											wherein
																											an
																											operating
																											mode,
																											source
																											and/or
																											sink,
																											in
																											which
																											the
																											device
																											assigned
																											to
																											an
																											endpoint
																											module
																											is
																											operated
																											is
																											stipulated
																											in
																											a
																											transmission
																											mode.
															 
				
		 EuroPat v2
			
																						Wird
																											beispielsweise
																											im
																											CPH
																											erkannt,
																											daß
																											ein
																											von
																											der
																											Anwendung
																											angekommener
																											Request
																											zur
																											Verschaltung
																											einer
																											lokalen
																											Quelle
																											mit
																											einer
																											Senke
																											nicht
																											lokal
																											ausgeführt
																											werden
																											kann,
																											da
																											die
																											Senke
																											sich
																											auf
																											einem
																											anderen
																											Rechner
																											befindet,
																											so
																											wird
																											über
																											das
																											NIF
																											ein
																											entsprechender
																											Zugang
																											zu
																											diesem
																											Rechner
																											eingerichtet.
																		
			
				
																						If,
																											for
																											example,
																											it
																											is
																											recognized
																											in
																											the
																											CPH
																											that
																											a
																											request,
																											which
																											has
																											arrived
																											from
																											the
																											application,
																											for
																											the
																											interconnection
																											of
																											a
																											local
																											source
																											to
																											a
																											sink
																											cannot
																											be
																											executed
																											locally,
																											since
																											the
																											sink
																											is
																											situated
																											on
																											a
																											different
																											computer,
																											then
																											corresponding
																											access
																											to
																											this
																											computer
																											is
																											set
																											up
																											via
																											the
																											NIF.
															 
				
		 EuroPat v2
			
																						Der
																											Initialisierungsblock
																											umfaßt
																											Angaben
																											zur
																											Quelle
																											und
																											Senke
																											der
																											Nachricht,
																											wobei
																											durch
																											die
																											Kennzeichnung
																											der
																											Nachrichtensenke,
																											eine
																											Unterscheidung
																											zwischen
																											einem
																											örtlichen
																											Facsimile-Endgerät
																											Fax
																											(z.B.
																											beim
																											Ausdrucken
																											von
																											Facsimile-Nachrichten),
																											einem
																											entfernten
																											Facsimile-Endgerät
																											(z.B.
																											beim
																											Versenden
																											einer
																											Facsimile-Nachricht)
																											oder
																											auch
																											einem
																											Fernsprechendgerät
																											FE
																											(z.B.
																											zum
																											Aufbau
																											einer
																											Fernsprechverbindung)
																											vorgenommen
																											werden
																											kann.
																		
			
				
																						The
																											initialization
																											block
																											comprises
																											details
																											specifying
																											the
																											source
																											and
																											receptor
																											of
																											the
																											message,
																											the
																											identification
																											of
																											the
																											message
																											receptor
																											allowing
																											a
																											distinction
																											to
																											be
																											drawn
																											between
																											a
																											local
																											facsimile
																											terminal
																											Fax
																											(for
																											example
																											when
																											printing
																											out
																											facsimile
																											messages),
																											a
																											remote
																											facsimile
																											terminal
																											(for
																											example
																											when
																											sending
																											a
																											facsimile
																											message)
																											or
																											else
																											a
																											telephone
																											terminal
																											FE
																											(for
																											example
																											for
																											establishing
																											a
																											telephone
																											link).
															 
				
		 EuroPat v2
			
																						Quelle
																											und
																											Senke
																											werden
																											jeweils
																											durch
																											ein
																											3-Tupel
																											aus
																											dem
																											Identifier
																											des
																											physikalischen
																											Geräts,
																											dem
																											Identifier
																											des
																											Automatisierungobjekts
																											und
																											dem
																											Identifier
																											des
																											Ein-
																											bzw.
																											Ausgangs
																											beschrieben.
																		
			
				
																						The
																											source
																											and
																											drain
																											are
																											in
																											each
																											case
																											described
																											by
																											a
																											3-tuple
																											from
																											the
																											identifier
																											of
																											the
																											physical
																											device,
																											the
																											identifier
																											of
																											the
																											automation
																											object
																											and
																											the
																											identifier
																											of
																											the
																											input
																											or
																											output.
															 
				
		 EuroPat v2
			
																						Wenn
																											nun
																											einerseits
																											Schallenergie
																											z.B.
																											von
																											der
																											Karosserieseite,
																											d.h.
																											dem
																											Blech,
																											über
																											die
																											geschlossenen
																											Hohlkammern,
																											die
																											Schaumschicht
																											derFeder
																											und
																											die
																											anschließende
																											biegeweiche
																											Schwerschicht
																											als
																											Masse
																											transportiert
																											wird,
																											andererseits
																											aber
																											auch
																											in
																											Bereichen
																											außerhalb
																											dieser
																											gezielten
																											Störstellen
																											durch
																											den
																											vollflächigen
																											Schaum
																											mit
																											einer
																											Dicke,
																											die
																											der
																											Dicke
																											der
																											Gesamtfeder
																											enspricht,
																											übertragen
																											wird,
																											ergibt
																											sich
																											durch
																											die
																											so
																											erreichten
																											unterschiedlichen
																											Schallgeschwinäigkeiten
																											in
																											der
																											Hohlkammer
																											und
																											in
																											dem
																											Schaumstoff
																											eine
																											Laufzeitverzögerung,
																											die
																											offenbar
																											zu
																											einer
																											solchen
																											Phasenverschiebung
																											führt,
																											daß
																											im
																											Bereich
																											der
																											Störstellen
																											die
																											gewünschte
																											Umwandlung
																											der
																											Quelle
																											in
																											eine
																											Senke
																											erreicht
																											wird.
																		
			
				
																						When
																											sound
																											energy
																											is
																											transmitted,
																											e.g.
																											from
																											the
																											car
																											body
																											side,
																											i.e.
																											the
																											panel,
																											on
																											the
																											one
																											hand
																											via
																											the
																											closed
																											cells,
																											the
																											foam
																											layer
																											of
																											the
																											spring
																											and
																											the
																											adjoining
																											soft
																											flexible
																											heavy
																											layer
																											as
																											mass,
																											and
																											on
																											the
																											other
																											hand
																											is
																											also
																											transmitted
																											in
																											regions
																											outside
																											these
																											purposeful
																											discontinuities
																											through
																											the
																											uninterrupted
																											foam,
																											of
																											which
																											the
																											thickness
																											corresponds
																											to
																											the
																											thickness
																											of
																											the
																											entire
																											spring,
																											the
																											differing
																											speeds
																											of
																											sound
																											in
																											the
																											cell
																											and
																											in
																											the
																											foam
																											material
																											result
																											in
																											a
																											time
																											delay
																											that
																											obviously
																											leads
																											to
																											a
																											phase
																											displacement
																											such
																											that
																											the
																											desired
																											conversion
																											of
																											the
																											source
																											into
																											a
																											sink
																											in
																											the
																											region
																											of
																											the
																											discontinuities
																											is
																											achieved.
															 
				
		 EuroPat v2
			
																						Bei
																											einem
																											N-Kanal
																											FET,
																											wo
																											die
																											N-leitende
																											Quelle
																											und
																											Senke
																											in
																											einem
																											Substrat
																											mit
																											P-Leitfähigkeit
																											ausgebildet
																											sind,
																											kann
																											die
																											Schwellwertspannung
																											des
																											FET
																											durch
																											zusätzliche
																											lonenimplantation
																											P-leitender
																											Dotierungsmittel
																											in
																											den
																											Kanalbereich
																											erhöht
																											werden.
																		
			
				
																						In
																											the
																											case
																											of
																											an
																											N-channel
																											FET
																											device,
																											where
																											the
																											source
																											and
																											drain
																											of
																											N-type
																											conductivity
																											are
																											formed
																											in
																											a
																											substrate
																											of
																											P-type
																											conductivity,
																											the
																											threshold
																											voltage
																											of
																											the
																											FET
																											device
																											may
																											be
																											increased
																											by
																											ion-implanting
																											additional
																											P-type
																											conductivity
																											dopants
																											into
																											the
																											channel
																											region.
															 
				
		 EuroPat v2
			
																						Dies
																											hat
																											jedoch
																											den
																											Nachteil,
																											dass
																											durch
																											diese
																											Schaltungsart
																											der
																											Photostrom
																											den
																											Leistungsverbrauch
																											der
																											gesamten
																											Schaltung
																											erhöht,
																											da
																											die
																											in
																											Sperrrichtung
																											geschaltete
																											Photodiode
																											nicht
																											als
																											Quelle,
																											sondern
																											als
																											"Senke"
																											arbeitet
																											und
																											der
																											durch
																											das
																											Umgebungslicht
																											hervorgerufene
																											Photostromanteil
																											von
																											der
																											Spannungsversorgung
																											erzeugt
																											werden
																											muss.
																		
			
				
																						This
																											has
																											the
																											disadvantage
																											however
																											that
																											due
																											to
																											this
																											type
																											of
																											circuit,
																											the
																											photocurrent
																											increases
																											the
																											power
																											consumption
																											of
																											the
																											entire
																											circuit,
																											since
																											the
																											reverse-biased
																											photodiode
																											works
																											not
																											as
																											a
																											source,
																											but
																											as
																											a
																											“sink”
																											and
																											the
																											photocurrent
																											component
																											produced
																											by
																											the
																											ambient
																											light
																											must
																											be
																											generated
																											by
																											the
																											power
																											supply.
															 
				
		 EuroPat v2
			
																						So
																											stellt
																											eine
																											technische
																											Anlage
																											naturgemäß
																											Quelle
																											und
																											Senke
																											für
																											HMI
																											Daten
																											dar,
																											ist
																											aber
																											nicht
																											in
																											jedem
																											Fall
																											das
																											geeignete
																											Gerät,
																											um
																											damit
																											auch
																											gleichzeitig
																											direkte
																											Bedienungen
																											und
																											Beobachtungen
																											vorzunehmen.
																		
			
				
																						For
																											example,
																											a
																											technical
																											installation
																											represents
																											a
																											source
																											and
																											a
																											destination
																											for
																											HMI
																											data,
																											but
																											is
																											not
																											in
																											every
																											case
																											also
																											suited
																											for
																											direct
																											control
																											and
																											monitoring.
															 
				
		 EuroPat v2
			
																						In
																											diesem
																											Artikel
																											wird
																											erwähnt,
																											daß
																											die
																											Kanalzone
																											zwischen
																											der
																											N
																											+-
																											Zone
																											und
																											dem
																											N--Substrat,
																											die
																											als
																											Quelle
																											und
																											Senke
																											des
																											DMOS-Transistors
																											verwendet
																											werden,
																											zumindest
																											eine
																											Länge
																											von
																											2,5
																											µm
																											zur
																											Verhinderung
																											eines
																											Durchgriffsabbruchs
																											zwischen
																											der
																											Senke
																											und
																											der
																											Quelle
																											aufweisen
																											sollte.
																		
			
				
																						As
																											mentioned
																											in
																											this
																											article
																											the
																											channel
																											between
																											the
																											N+
																											region
																											and
																											the
																											N-
																											substrate
																											which
																											are
																											used
																											as
																											the
																											source
																											and
																											the
																											drain
																											of
																											the
																											DMOS
																											transistor
																											should
																											at
																											least
																											have
																											a
																											length
																											of
																											2.5
																											micron
																											in
																											order
																											to
																											prevent
																											punchthrough
																											breakdown
																											between
																											drain
																											and
																											source.
															 
				
		 EuroPat v2