Übersetzung für "Unten zu bewegen" in Englisch

Paint ladders (ways to go up or down)

The turnbuckles 56 are thus urged to move downward.

Press Z key to move down depth levels.

Click or to move the command up or down.

They all have to move things from upstairs to downstairs.

Press this button to move the currently selected scheme one step downwards.

So, to move all balls 8 pixels down, you can type.

Press S to move, press the W key to move down!

The auxiliary valve has an auxiliary valve body which can be moved downwards in order to trigger flushing.

Even the vibrations resulting from driving are not able to move the window pane 14 downward.

One up-and-down movement of the hands is counted as one time.

The playing field consists of three bands, which move down colored rectangular blocks.

Jezebel made my arm reach down, and draw my bronze dagger.

To turn, and look up and down, simply move the mouse.

To move row up or down, you just need to do as follow.

However, as it rises, it cools and while part of it continues up as vapor, some of it (enriched in the less volatile component) begins to descend again.

Gradually, with lenders becoming increasingly confident in subsequent years that low inflation was here to stay, real long-term interest rates began heading south.

To move between folders you can simply step up and down the tree:

But we will also have to answer questions as to why we have not been able to get unemployment down.

Thus it is impossible to move the catch 26 downwards past the bolt 6.

Simultaneously thereto, whereby "simultaneous" can also include a slight chronological delay in the operational sequence, the draw-off belts or bands 19 and 20 are actuated by the drive motor 21 to revolve in the "normal" or downstream direction of conveyance of the hose or tube 18 as indicated by the arrows n. The downward motion or travel of the hose or tube 18 thus commences.

Should the piston 7 in the main pressure valve 4 bind because of fouling, for example, unacceptably high pressures might occur in the whole transmission control system because the main pressure returned through the line L4 and the throttle D1 to the piston 7 would no longer be able to move the piston 7 downwardly against the action of the spring 10 to release the main pressure.

Conversely, turning the drive sprocket in the counter-clockwise direction causes the drive chain 66 to move downward and rolls the chain onto the spool 140.

In order to horizontalize the weapon platform 7 around the axis 43, the coupling 34 has to be moved downwards again, until it leaves the coupling disc 39 and engages in the coupling disc 38.

Then, the pneumatic cylinder 29 is actuated to move the supporting element guide means 26 and thus the supporting elements 24, 25 again in the downward direction with respect to the blade guide 11 and the upper gripper jaw 6, as illustrated in FIG.

The circular area is used to move the carriage very quickly upwardly between the opened cross-welding jaws, while the ellipsoidal area brings about a longer crank length and thus a slower movement of the carriage during the stripping operation.

If now one of the tires 25, 29 begins to lose air to such an amount that its pressure falls below above mentioned value of 3 bar (43.5 psi), the control rod 13, under action of spring 14, will begin to descend.

Under the action of the gravity or a spring (not shown) the carriage or sled 155 has the tendency to move downward, whereby the portion of the film strip 22 running between the sprocket 131 in the winding drum 34 and an upper sprocket 157 of the projector 20 is tensioned by a given tension force.

If the pressure drops below a minimum value, then the piston 4 begins to move downward both by the weight of the sliding element 43 and by the force exerted by the valve spring 8.