Translation of "Mean load" in German

High PV-values mean high load capacities of the bearing.

Live appearances mean maximum load requirements for the equipment used.

The mean daily hydraulic load for each loading phase shall be set in accordance with Table 1.

A Lash2000 fastener is a mean for load securing that closes the ends of a load securing band.

As explained above, the mean load voltage is ascertained with the aid of the first controller.

In particular, the steady-state, mean load torque based on a characteristic is obtained from the steady-state rotation speed actual value.

A phosphatized buckle is a mean of load securing that closes the ends of fabric strapping bands.

In this way the normal operation, in which the current vector oscillates .+-.30° about a mean load angle, is not influenced by the blocking circuit, but, at larger load angles, produces a lowering of the stator frequency which prevents pulling-out.

A correlation between motor rotational speed and load torque occurs so that the decrease and increase, respectively, of the rotational speed has a direct effect upon the load torque and, in fact, to such an extent that the fluctuations in load torque are effectively reduced and a mean load torque is obtained which is approximately constant.

This would however mean a higher load on the main drive, which would have to supply the entire required acceleration torque alone.

It is particularly advantageous within the scope of the present invention for the movement of the diffraction element to take place periodically so the individual partial regions that are irradiated change constantly with respect to time, which results in a uniform, mean thermal load on the partial regions.

This is especially the case for systems for engines of low power since these systems are often operated at mean rpms and at mean to upper load ranges for which operating states especially high underpressures occur between intake end and venting end of the adsorption filter.